Jeep Grand Cherokee (2019 year). Instruction - part 37

 

  Index      Jeep     Jeep Grand Cherokee - instruction 2019 year in english

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  35  36  37  38   ..

 

 

Jeep Grand Cherokee (2019 year). Instruction - part 37

 

 

• If you are creating your own files, the recommended

fixed bit rate for MP3 files is between 96 and 192Kbps
and the recommended fixed bit rate for WMA files is
between 64 and 192Kbps. Variable bit rates are also
supported. For both formats, the recommended sample
rate is either 44.1kHz or 48kHz.

• To change the current file, use the remote control’s or

Blu-ray Disc player’s

䉱 button to advance to the next

file, or the

䉲 button to return to the start of the current

or previous file.

Disc Errors

If the Blu-ray Disc player is unable to read the disc, a

⬙Disc

Error

⬙ message is displayed on the rear screen and Radio

displays. A dirty, damaged, or incompatible disc format are
all potential causes for a

⬙Disc Error⬙ message.

If a disc has a damaged track which results in audible or
visible errors that persists for two seconds, the Blu-ray Disc
player will attempt to continue playing the disc by skip-
ping forward one to three seconds at a time. If the end of
the disc is reached, the Blu-ray Disc player will return to
the beginning of the disc and attempt to play the start of
the first track.

The Blu-ray Disc player may shut down during extremely
hot conditions, such as when the vehicle’s interior tem-
perature is above 120° F (48.9° C). When this occurs, the
player will display

⬙High Temp⬙ and will shut off the rear

seat displays until a safe temperature is reached. This
shutdown is necessary to protect the optics of the Blu-ray
Disc player.

Product Agreement

This product incorporates copyright protection technology
that is protected by U.S. patents and other intellectual
property rights. Use of this copyright protection technol-
ogy must be authorized by Macrovision, and is intended
for home or other limited viewing uses otherwise autho-
rized by Macrovision. Reverse engineering or disassembly
is prohibited.

Dolby Digital and MLP Lossless Manufactured un-

der license from Dolby Laboratories.

⬙Dolby⬙, ⬙MLP Loss-

less

⬙, and the double-D symbol are trademarks of Dolby

Laboratories. Confidential unpublished works. Copyright
1992-1997 Dolby Laboratories. All rights reserved.

580

MULTIMEDIA

RADIO OPERATION AND MOBILE PHONES

Under certain conditions, the mobile phone being on in
your vehicle can cause erratic or noisy performance from
your radio. This condition may be lessened or eliminated
by relocating the mobile phone antenna. This condition is
not harmful to the radio. If your radio performance does
not satisfactorily “clear” by the repositioning of the an-
tenna, it is recommended that the radio volume be turned
down or off during mobile phone operation when not
using Uconnect (if equipped).

Regulatory And Safety Information

USA/CANADA

Exposure to Radio Frequency Radiation

The radiated output power of the internal wireless radio is
far below the FCC and IC radio frequency exposure limits.
Nevertheless, the wireless radio will be used in such a
manner that the radio is 8 in (20 cm) or further from the
human body.

The internal wireless radio operates within guidelines
found in radio frequency safety standards and recommen-
dations, which reflect the consensus of the scientific com-
munity.

The radio manufacturer believes the internal wireless radio
is safe for use by consumers. The level of energy emitted is
far less than the electromagnetic energy emitted by wire-
less devices such as mobile phones. However, the use of
wireless radios may be restricted in some situations or
environments, such as aboard airplanes. If you are unsure
of restrictions, you are encouraged to ask for authorization
before turning on the wireless radio.

The following regulatory statement applies to all Radio
Frequency (RF) devices equipped in this vehicle:

This device complies with Part 15 of the FCC Rules and
with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, in-

cluding interference that may cause undesired opera-
tion.

NOTE:

Changes or modifications not expressly approved

by the party responsible for compliance could void the
user’s authority to operate the equipment.

10

MULTIMEDIA

581

NOTE:
• This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment gener-
ates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio commu-
nications. However, there is no guarantee that interfer-
ence will not occur in a particular installation.

• If this equipment does cause harmful interference to

radio or television reception, which can be determined
by turning the equipment off and on, the user is encour-
aged to try to correct the interference by one or more of
the following measures:

1. Increase the separation between the equipment and

receiver.

2. Consult an authorized dealer or an experienced radio

technician for help.

UCONNECT VOICE RECOGNITION QUICK TIPS

Introducing Uconnect

Start using Uconnect Voice Recognition with these helpful
quick tips. It provides the key Voice Commands and tips
you need to know to control your Uconnect 4, or Uconnect
4C/4C NAV system.

Uconnect 4

582

MULTIMEDIA

If you see the NAV icon on the bottom bar, or in the Apps
menus, of your 8.4-inch touchscreen, you have the
Uconnect 4C NAV system. If not, you have a Uconnect 4C
with 8.4-inch display system.

Get Started

All you need to control your Uconnect system with your
voice are the buttons on your steering wheel.

Helpful hints for using Voice Recognition:
• Visit UconnectPhone.com to check mobile device and

feature compatibility and to find phone pairing instruc-
tions.

• Reduce background noise. Wind and passenger conver-

sations are examples of noise that may impact recogni-
tion.

• Speak clearly at a normal pace and volume while facing

straight ahead. The microphone is positioned on the
rearview mirror and aimed at the driver.

• Each time you give a Voice Command, you must first

push either the Voice Recognition (VR) or Phone button,
wait until after the beep, then say your Voice Command.

Uconnect 4C/4C NAV

10

MULTIMEDIA

583

• You can interrupt the help message or system prompts

by pushing the VR or Phone button and saying a Voice
Command from the current category.

Basic Voice Commands

The basic Voice Commands below can be given at any
point while using your Uconnect system.

Push the VR button

. After the beep, say:

• “ Cancel” to stop a current voice session
• “ Help” to hear a list of suggested Voice Commands
• “ Repeat” to listen to the system prompts again
Notice the visual cues that inform you of your voice
recognition system’s status. Cues appear on the touch-
screen.

Radio

Use your voice to quickly get to the AM, FM or SiriusXM
Satellite Radio stations you would like to hear. (Subscrip-
tion or included SiriusXM Satellite Radio trial required.)

Push the VR button

. After the beep, say:

• “ Tune to ninety-five-point-five FM”
• “ Tune to Satellite Channel Hits 1”

Uconnect Voice Command Buttons

1 — Push To Initiate Or To Answer A Phone Call, Send Or Receive
A Text
2 — For All Radios: Push To Begin Voice Commands
3 — Push To End Call

584

MULTIMEDIA

TIP:

At any time, if you are not sure of what to say or want

to learn a Voice Command, push the VR button

and say

“ Help.” The system provides you with a list of com-
mands.

Media

Uconnect offers connections via USB, Bluetooth and auxil-
iary ports (If Equipped). Voice operation is only available
for connected USB and AUX devices.

Push the VR button

. After the beep, say one of the

following commands and follow the prompts to switch
your media source or choose an artist.

Uconnect 4 Radio

Uconnect 4C/4C NAV Radio

10

MULTIMEDIA

585

• “ Change source to Bluetooth”
• “ Change source to AUX”
• “ Change source to USB”
• “ Play artist Beethoven”; “ Play album Greatest Hits”; “

Play song

Moonlight Sonata”; “ Play genre Classical”

TIP:

Press the Browse button on the touchscreen to see all

of the music on your USB device. Your Voice Command
must match exactly how the artist, album, song and genre
information is displayed.

Phone

Making and answering hands-free phone calls is easy with
Uconnect. When the Phonebook button is illuminated on
your

touchscreen,

your

system

is

ready.

Check

UconnectPhone.com for mobile phone compatibility and
pairing instructions.

Push the Phone button

. After the beep, say one of the

following commands:

Uconnect 4 Media

Uconnect 4C/4C NAV Media

586

MULTIMEDIA

• “ Call John Smith”
• “ Dial 123-456-7890 and follow the system prompts”
• “ Redial (call previous outgoing phone number)”
• “ Call back (call previous incoming phone number)”

TIP:

When providing a Voice Command, push the Phone

button

and say “ Call,” then pronounce the name

exactly

as it appears in your phone book. When a

contact has multiple phone numbers, you can say “ Call
John Smith work.”

Voice Text Reply — If Equipped

Uconnect announces incoming text messages. Push the VR
button

or Phone button

(if enabled) and say “

Listen

.” (Must have compatible mobile phone paired to

Uconnect system.)

1. Once an incoming text message is read to you, push the

VR button

or Phone button

(if enabled). After

the beep, say: “ Reply.”

Uconnect 4 Phone

Uconnect 4C/4C NAV Phone

10

MULTIMEDIA

587

2. Listen to the Uconnect prompts. After the beep, repeat

one of the pre-defined messages and follow the system
prompts.

PRE-DEFINED VOICE TEXT REPLY RESPONSES

Yes.

Stuck in traffic.

See you later.

No.

Start without

me.

I’ll be late.

Okay.

Where are you?

I will be 5 <or

10, 15, 20, 25, 30,

45, 60> minutes

late.

Call me.

Are you there

yet?

I’ll call you later.

I need direc-

tions.

See you in 5 <or

10, 15, 20, 25, 30,

45, 60> minutes.

I’m on my way.

Can’t talk right

now.

I’m lost.

Thanks.

NOTE:

Only use the numbering listed, otherwise the

system does not transpose the message.

TIP:

Your mobile phone must have the full implementation

of the Message Access Profile (MAP) to take advantage of
this

feature.

For

details

about

MAP,

visit

UconnectPhone.com.

Apple iPhone iOS 6 or later supports reading incoming
text messages only. To enable this feature on your Apple
iPhone, follow these four simple steps:

TIP:

Voice Text Reply is not compatible with iPhone, but if

your vehicle is equipped with Siri Eyes Free, you can use
your voice to send a text message.

iPhone Notification Settings

1 — Select “Settings”
2 — Select “Bluetooth”
3 — Select The (i) For The Paired Vehicle
4 — Turn On “Show Notifications”

588

MULTIMEDIA

Climate

Too hot? Too cold? Adjust vehicle temperatures hands-free
and keep everyone comfortable while you keep moving
ahead. (If vehicle is equipped with climate control.)

Push the VR button

. After the beep, say one of the

following commands:
• “ Set the driver temperature to 70 degrees
• “ Set the passenger temperature to 70 degrees

TIP:

Voice Command for Climate may only be used to

adjust the interior temperature of your vehicle. Voice
Command will not work to adjust the heated seats or
steering wheel if equipped.

Uconnect 4 Climate

10

MULTIMEDIA

589

Navigation (4C NAV) — If Equipped

The Uconnect navigation feature helps you save time and
become more productive when you know exactly how to
get to where you want to go.

1. To enter a destination, push the VR button

. After the

beep, say: “ Find address 800 Chrysler Drive Auburn
Hills, Michigan.”

2. Then follow the system prompts.

TIP:

To start a POI search, push the VR button

. After

the beep, say: “ Find nearest coffee shop.”

Uconnect 4C/4C NAV Climate

Uconnect 4C NAV Navigation

590

MULTIMEDIA

SiriusXM Guardian (4C/4C NAV) — If Equipped

CAUTION!

Some SiriusXM Guardian services, including SOS Call
and Roadside Assistance Call will NOT work without
an operable LTE (voice/data) or 3G or 4G (data) net-
work connection compatible with your device.

NOTE:

Your vehicle may be transmitting data as autho-

rized by the subscriber.

An included trial and/or subscription is required to take
advantage of the SiriusXM Guardian services in the next
section of this guide. To register with SiriusXM Guardian,
press the Apps button on the Uconnect 4C/4C NAV
touchscreen to get started.

NOTE:

SiriusXM Guardian is available only on equipped

vehicles purchased within the continental United States,
Alaska, Hawaii and Canada. Services can only be used
where coverage is available; see coverage map for details.

SOS Call

Theft Alarm Notification

Remote Door Lock/Unlock

Send & Go

Vehicle Finder

Stolen Vehicle Assistance

Remote Vehicle Start**

Remote Horn & Lights

Roadside Assistance Call

Vehicle Health Reports**

Vehicle Health Alert**

Performance Pages Plus**

**If vehicle is equipped.

Register (4C/4C NAV)

To unlock the full potential of SiriusXM Guardian in your
vehicle, you must activate your SiriusXM Guardian ser-
vices.

1. Press the Apps icon on the bottom of your in-vehicle

touchscreen.

2. Select the Activate Services icon from your list of apps.

10

MULTIMEDIA

591

3. Select “Customer Care” to speak with a SiriusXM

Guardian Customer Care agent who will activate ser-
vices in your vehicle, or select “Enter Email” to activate
on the web.

• U.S. residents visit: www.siriusxm.com/guardian.
• Canadian residents visit: www.siriusxm.ca/guardian.

Vehicle Health Report/Alert (4C/4C NAV)

Your vehicle will send you a monthly email report, which
summarizes the performance of your vehicle’s key systems
so you can stay on top of your vehicle’s maintenance needs
if you are registered for SiriusXM Guardian. Your vehicle
will also send you Vehicle Health Alerts when it detects
issues with its key systems that need your attention. For
further information, refer to your Uconnect Owner’s
Manual Supplement.

Mobile App (4C/4C NAV)

You’re only a few steps away from using remote com-
mands and sending a destination from your phone to your
vehicle.

To use the Uconnect Mobile App:

1. Once you have registered your SiriusXM Guardian

services, download the Uconnect App to your mobile
device. Use your Owner Account login and password to
open the app.

2. Once on the “Remote” screen, you can begin using

Remote Door Lock/Unlock, Remote Vehicle Start, and
activate your horn and lights remotely, if equipped.

Mobile App

592

MULTIMEDIA

3. Press the “Location” button on the bottom menu bar of

the app to bring up a map to locate your vehicle or send
a location to your Uconnect Navigation using Vehicle
Finder and Send & Go , if equipped.

4. Press the “Settings” side menu in the upper left corner

of the app to bring up app settings.

NOTE:

For

further

information

please

visit

DriveUconnect.com (U.S. Residents) or DriveUconnect.ca
(Canadian Residents).

SiriusXM Travel Link (4C NAV)

Need to find a gas station, view local movie listings, check
a sports score or the 5 - day weather forecast? SiriusXM
Travel Link is a suite of services that brings a wealth of
information right to your Uconnect 4C NAV system. (Not
available for Uconnect 4 system.)

Push the VR button

. After the beep, say one of the

following commands:
• “ Show fuel prices
• “ Show 5 - day weather forecast
• “ Show extended weather

TIP:

Traffic alerts are not accessible with Voice Command.

SiriusXM Travel Link

10

MULTIMEDIA

593

Siri Eyes Free — If Equipped

Siri lets you use your voice to send text messages, select
media, place phone calls and much more. Siri uses your
natural language to understand what you mean and re-
sponds back to confirm your requests. The system is
designed to keep your eyes on the road and your hands on
the wheel by letting Siri help you perform useful tasks.

To enable Siri, push and hold, then release the Uconnect
Voice Recognition (VR) button on the steering wheel. After
you hear a double beep you can ask Siri to play podcasts
and music, get directions, read text messages and many
other useful requests.

Uconnect 4 Siri Eyes Free Available

594

MULTIMEDIA

Do Not Disturb

With Do Not Disturb, you can disable notifications from
incoming calls and texts, allowing you to keep your eyes
on the road and hands on the wheel. For your convenience,
there is a counter display to keep track of your missed calls
and text messages while you were using Do Not Disturb.

Do Not Disturb can automatically reply with a text mes-
sage, a call or both, when declining an incoming call and
send it to voicemail.

Automatic reply messages can be:
• “I am driving right now, I will get back to you shortly.”
• Create a custom auto reply message up to 160 characters.

NOTE:

Only the first 25 characters can be seen on the

touchscreen while typing a custom message.

While in Do Not Disturb, Conference Call can be selected
so you can still place a second call without being inter-
rupted by incoming calls.

NOTE:
• Reply with text message is not compatible with iPhones.
• Auto reply with text message is only available on

phones that support Bluetooth MAP.

Android Auto — If Equipped

NOTE:

Feature availability depends on your carrier and

mobile phone manufacturer. Some Android Auto features
may or may not be available in every region and/or
language.

Uconnect 4C/4C NAV With 8.4–inch Siri Eyes Free

Available

10

MULTIMEDIA

595

 

 

 

 

 

 

 

Content   ..  35  36  37  38   ..