|
|
CONDITION POSSIBLE CAUSES CORRECTION NO DRIVE OR REVERSE 1. Fluid Level Low. 1. Add fluid and check for leaks if drive is 2. Gearshift Linkage/Cable 2. Inspect, adjust and reassemble linkage 3. U-Joint/Axle/Transfer Case 3. Perform preliminary inspection procedure 4. Filter Plugged. 4. Remove and disassemble transmission. 5. Oil Pump Damaged. 5. Perform pressure test to confirm low 6. Valve Body Malfunctioned. 6. Check and inspect valve body. Replace 7. Transmission Internal Component 7. Remove and disassemble transmission. 8. Park Sprag not Releasing - Check 8. Remove, disassemble, repair. 9. Torque Converter Damage. 9. Inspect and replace as required. 21 - 62 42RE AUTOMATIC TRANSMISSION WJ DIAGNOSIS AND TESTING (Continued) |