|
|
Content .. 1043 1044 1045 1046 ..
Symptom List: ANTENNA FAILURE Test Note: All symptoms listed above are diagnosed using the same tests. The title for the tests will be ANTENNA FAILURE. When Monitored and Set Condition: ANTENNA FAILURE When Monitored: Every 250 milliseconds with the ignition on. Set Condition: The SKIM’s microcontroller determines that an antenna circuit fault has occurred for 2.0 consecutive seconds. COP FAILURE When Monitored: With the ignition on. Set Condition: The COP timer is not reset by the microcontroller every 65.5 milliseconds EEPROM FAILURE When Monitored: With the ignition on. Set Condition: When the value written to EEPROM memory does not equal the value read back after the write operation. INTERNAL FAULT When Monitored: With the ignition on. Set Condition: The SKIM has detected a fault during an internal self test. RAM FAILURE When Monitored: With the ignition on. Set Condition: The RAM fails a test that checks the RAM’s ability to retain memory. SERIAL LINK INTERNAL FAULT When Monitored: With the ignition on. Set Condition: The SKIM fails an internal J1850 communication self test. STACK OVERFLOW FAILURE When Monitored: With the ignition on. Set Condition: The microcontroller has exceeded its stack space limit. 397 VEHICLE THEFT/SECURITY |