-> Yes
INSTALL a new passenger curtain airbag module,
Side Air Curtain Module (76.73.64) CLEAR the DTC. TEST the system for normal
operation.
-> No
INSTALL a new passenger curtain airbag harness. CLEAR the DTC. TEST the system for
normal operation.
PINPOINT TEST G1043827p12 : DTC
B2292: FLASH CODE 33: DRIVER SIDE
SEAT BELT PRETENSIONER
MALFUNCTION
G1043827t70 : CHECK THE DRIVER SIDE SEAT BELT
PRETENSIONER CIRCUIT FOR HIGH RESISTANCE
1. Disconnect the battery negative terminal. 2. Wait one minute for the system to become safe.
3. Disconnect the driver seat belt pretensioner electrical connector, SD19. 4. Disconnect the
RCM electrical connector, CR87. 5. Measure the resistance between SD19, pin 02 (GR) and
CR87, pin 31 (GR).
•
Is the resistance greater than 5 ohms?
-> Yes
INSTALL a new driver side seat belt pretensioner harness. CLEAR the DTC. TEST the
system for normal operation.
-> No
GO to Pinpoint Test G1043827t71.
G1043827t71 : CHECK THE DRIVER SIDE SEAT BELT
PRETENSIONER CIRCUIT FOR SHORT TO GROUND
1. Reconnect the battery negative terminal. 2. Measure the resistance between SD19, pin 02
(GR) and GROUND.
•
Is the resistance less than 10,000 ohms?
-> Yes
REPAIR the short circuit. For additional information, refer to the wiring diagrams. CLEAR
the DTC. TEST the system for normal operation.