Index Isuzu Isuzu Amigo / Axiom / Trooper / Rodeo / VehiCross - service repair manual 1999-2002 year
|
|
5A–20 BRAKE CONTROL SYSTEM Step No Yes Action 10 Is the input of 4WD controller normal? Go to Step 11 Replace controller or repair harness. Go to Step 11 11 Reconnect all components and ensure all components are Was this step finished? Repeat the “Basic diagnostic flow chart.” Go to Step 11 Chart TA-1 ABS Works Frequently But Vehicle Does Not Decelerate (Use TECH 2) Step Action Yes No 1 1. Connect TECH 2. sensor by mode “F1: Data Display”. Is the output of each sensor normal? Go to Step 2 Replace wheel speed sensor. Go to Step 3 2 Return to Chart A-1. Was the Chart A-1 finished? Go to Step 3 Go to Step 2 3 Reconnect all components, ensure all components are properly Was this step finished? Repeat the “Basic diagnostic flow chart.” Go to Step 3 Chart A-2 Uneven Braking Occurs While ABS Works Step Action Yes No 1 Is there play in each sensor? Repair. Go to Step 5 Go to Step 2 2 Is there damage or powdered iron sticking to each sensor/sensor Repair. Go to Step 5 Go to Step 3 3 Is the output of each sensor normal? (Refer to chart C-1 or TC-1) Go to Step 4 Replace sensor or repair harness. Go to Step 5 4 Is brake pipe connecting order correct? Replace EHCU. Go to Step 5 Reconnect brake pipe correctly. Go to Step 5 5 Reconnect all components, ensure all components are properly Was this step finished? Repeat the “Basic diagnostic flow chart.” Go to Step 5 |