Isuzu N-Series. Manual - part 1244

 

  Index      Isuzu     Isuzu N-Series - service repair manual

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  1242  1243  1244  1245   ..

 

 

Isuzu N-Series. Manual - part 1244

 

 

5

DOOR LOCKS
1. Locking using the key
Lock the door by turning the key toward the rear of the car and unlock it by
turning it toward the front.
CAUTION:
Be careful not to lock the door with the ignition key left in the vehicle.

2. Locking from inside
To lock your JAC from inside, simply close the door and push the lock button
down.
When this is done, the door cannot be opened using either the inside or the
outside door handle.
NOTE:
When the door is open or ajar, the warning lamp door will light on.

Keys
For greater convenience, your JAC has two types of keys. The master keys (1)
will function in the ignition, locking or unlocking the door and fuel tank cap
from outside. The electric tilting cap keys (2) will be used for locking or unlock鄄
ing the electric tilting cap system (If installed). Carrying a spare key is recom鄄
mended in case you accidentally lock one key inside the car.

KEY LOCKS
You can release the key by pressing the knob when the key is in 'LOCK" posi鄄
tion.

4

OWNER爷S MANUAL

JAC HEAVY DUTY TRUCK

7

POWER WINDOWS (If installed)
The power windows operate when the ignition key is in the 'ON' position. The
main switches are located on the driver's door side and control the passen鄄
ger's side. The windows may be opened by depressing the appropriate win鄄
dow switch and closed by pulling upon the switch. To open the window on the
driver's side, press the switch (1) halfway down. The windows moves as long
as the switch is operated. To fully open the driver's window automatically,
press the switch fully down. In automatic operation, the window will fully open
even if you let go of the switch. To stop at the desired opening, pull upon and
release the switch. In order to prevent operation of the window by passenger,
a window lock switch (2) is provided on the driver's door. There are two types
of the power window switch. One operates for 30 seconds after the ignition
key is turned to "ACC' or 'LOCK', but the power window glass doesn't move
when doors open.

CENTRAL DOOR LOCKS (If installed)
The central door locking system is located on the driver's door lock button. It is operated by depressing the door lock
button. If the front door is open when the button is depressed, the door will lock when closed.

NOTE:
When the front door lock button is depressed, the front doors will lock. When
the front door lock button Is pulled up, the front doors will unlock.

3. Locking from outside
The doors can be locked without a key.
First push the lock knob down, then close the door while depressing the push
button forward.

WINDOW GLASS
To raise or lower the window, turn the window, regulator handle clockwise or
counterclockwise.
WARNING:
When opening or closing the windows, make sure your passenger's arms and
hands are safely out of the way.

6

OWNER爷S MANUAL

JAC HEAVY DUTY TRUCK

9

ADJUSTABLE SEAT
Never attempt to adjust the seat while the vehicle is moving. This could result In loss of control.

Adjusting Seat Forward and Rearward (If installed)(Driver's side only)
To move the seat toward the front or rear, pull the lock release lever upwards.
This releases the seat on its track so you can move it forward or rearward to
the desired position. When you find the position you want, release the lever
and slide the seat forward or rearward on its track until it locks into position
and cannot be moved further.

Seat Cushion Height Fixing (Driver's side only) (If installed)
To fix the height of the seat cushion, fit the locking knob to the locker. It will
hold your seat position from the vibration.

The other doesn't operate after the ignition key is turned to 'ACC' or "LOCK
WARNING院

Be careful that someone's head, hands and body are not trapped by closing

window.
荫 Never try to operate the main switch on the driver's door and the passen鄄
ger's door window switch in opposing directions at the same time. If this done,
the window will stop and cannot be opened or closed.
荫 Do not leave children alone in the car. Always remove the ignition key for
their safety.

STEERING WHEEL TILT LEVER (If installed)
To adjust the steering wheel:
1. Pull the lever upward to unlock
2. Raise or lower the steering wheel to the desired position.
3. After adjustment, securely tighten the lever by pushing it downward.
WARNING:
Do not attempt to adjust the steering wheel while driving as this may result in
loss of control of the vehicle and result in death or serious injury.

8

OWNER爷S MANUAL

JAC HEAVY DUTY TRUCK

11

WARNING:
To minimize risk of personal injury in event of a collision or sudden stop, both
the driver and passenger seatbacks should always be in a nearly upright posi鄄
tion while the vehicle is in motion. The protection provided by the seat belts
may be reduced significantly when the seatback is reclined. There is greater
risk that the passenger will slide under the belt resulting in serious injury when
the seatback is reclined.
Adjustable Headrests (If installed)
The headrests in your JAC may be raised or lowered by releasing the lock
button on the headrest support. To raise the headrest, pull it up. To lower it,
press the headrest down. To move the headrest foreward , pull on the top. For
maximum effectiveness in case of an accident the headrest should be adjust鄄
ed so the top of the headrest is at the same height as the top of occupant's
ears. For this reason, the use of a cushion that holds the body away from the
seat back should not be used.
WARNING:
Do not operate vehicle with the headrests removed as injury to an occupant
may occur in the event of an accident. Headrests may provide protection a鄄
gainst neck injuries when properly adjusted.

Adjusting Armrest Angle (Driver's side only) (If installed)
The armrest will be raised or lowered manually.
To raise the armrest, pull it up.
To lower it, press the armrest down.

Adjusting Seatback Angle
To recline the seatback, lean forward to you're your weight off it, then pull up
on the recliner control lever at the outside edge of the seat. Now lean back un鄄
til the desired seatback angle is achieved. To lock the seatback into position,
release the recliner control lever.

10

OWNER爷S MANUAL

JAC HEAVY DUTY TRUCK

 

 

 

 

 

 

 

Content   ..  1242  1243  1244  1245   ..