|
|
7A1–30 TRANSMISSION CONTROL SYSTEM (4L30–E) DTC P0706 Transmission Range Switch (Mode Switch) Performance D07RY00011 Circuit Description D The range switch supplies the Powertrain Control D The range switch is also used to provide the D The range switch is also used to provide the backup D This DTC detects an invalid state of the range switch Conditions For Setting The DTC This DTC will set if any of the following conditions occurs: Condition 1 (“R” bad position): D Engine is running. D No output speed DTCP0722, P0723. D Output speed greater than 3,200 RPM. D Range switch indicates “R”. D All conditions met for 4 seconds. Condition 2 (“P” or “N” bad position): D Engine is running. D No TPS codes. D Engine speed is less than 3,000 RPM. D TP angle is greater than 20%. D Range switch indicates “P” or “N”. D All conditions met for 4 seconds. Action Taken When The DTC Sets D Default to “D” position. D The PCM will not illuminate the Malfunction Indicator Conditions For Clearing The DTC D The DTC can be cleared from the PCM history by D The DTC will be cleared from history when the vehicle D The PCM will cancel the DTC default actions when |