|
|
11. See the programming result.
Tech-2 displays the result of programming as the following.
Follow those instructions.
Selected Programming is not possible due to wrong System Status! Immobilizer Not Programmed! Immobilizer Already Programmed! ECM Not Programmed! ECM Already Programmed!
12. Transponder key must be reprogrammed, because all transponder information is erased. when ICU is programmed. See Transponder programming. 1. Procedure is the same as program ICU procedure steps 1 through 5. 6. Turn on the Ignition. 7. Select an Engine system. 8. See the display of programming result.
l Program ICU / ECM Caution 1) Do not replace ICU and ECM at the same time
2)Change ICU at first or ECM and other one change follows.
Follow Program ICU steps 1 through 6, procedure is the same as program ECM procedure
steps 1 through 6. 7. Input the security code. 8. Enter VIN 9. Enter Key No. 10. Select an engine system. See programming result display and follow instructions of the display. 11. Transponder key must be reprogrammed, because all transponder information on ICU is Erased when ICU is programmed. See Transponder programming. 12. Follow program ECM steps 1 through 8. |