Infiniti QX50/EX (2017 year). Manual

(426,1)

Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]

7-4

Appearance and care

ambient temperature.

Rinse the wheel to completely remove
the cleaner within 15 minutes after the
cleaner is applied.

CHROME PARTS

Clean chrome parts regularly with a non-
abrasive chrome polish to maintain the
finish.

TIRE DRESSING

INFINITI does not recommend the use of
tire dressings. Tire manufacturers apply a
coating to the tires to help reduce dis-
coloration of the rubber. If a tire dressing is
applied to the tires, it may react with the
coating and form a compound. This com-
pound may come off the tire while driving
and stain the vehicle paint.
If you choose to use a tire dressing, take
the following precautions:

Use a water-based tire dressing. The

coating on the tire dissolves more
easily with an oil-based tire dressing.

Apply a light coat of tire dressing to

help prevent it from entering the tire
tread/grooves (where it would be diffi-
cult to remove).

Wipe off excess tire dressing using a dry

towel. Make sure the tire dressing is
completely removed from the tire
tread/grooves.

Allow the tire dressing to dry as

recommended by tire dressing manu-
facturer.

Occasionally remove loose dust from the
interior trim, plastic parts and seats using
a vacuum cleaner or soft bristled brush.
Wipe the vinyl and leather surfaces with a
clean, soft cloth dampened in mild soap
solution, then wipe clean with a dry soft
cloth.
Regular care and cleaning is required in
order to maintain the appearance of the
leather.
Before using any fabric protector, read the
manufacturer’s recommendations. Some
fabric protectors contain chemicals that
may stain or bleach the seat material.
Use a cloth dampened only with water, to
clean the meter and gauge lens.

WARNING

Do not use water or acidic cleaners (hot
steam cleaners) on the seat. This can
damage the seat or occupant classification
sensors. This can also affect the operation of
the air bag system and result in serious
personal injury.

CLEANING INTERIOR

Condition:

-------------------------------------------------------------------------------------------------------------------------------------------------------------

(427,1)

Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]

CAUTION

Never use benzine, thinner, or any
similar material.

For cleaning, use a soft cloth, dampened
with water. Never use a rough cloth,
alcohol, benzine, thinner or any kind of
solvent or paper towel with a chemical
cleaning agent. They will scratch or
cause discoloration to the lens.

Do not spray any liquid such as water on
the meter lens. Spraying liquid may
cause the system to malfunction.

Small dirt particles can be abrasive and
damaging to the leather surfaces and
should be removed promptly. Do not use
saddle soap, car waxes, polishes, oils,
cleaning fluids, solvents, detergents or
ammonia-based cleaners as they may
damage the leather’s natural finish.

Only use fabric protectors approved by
INFINITI.

Do not use glass or plastic cleaner on
meter or gauge lens covers. It may
damage the lens cover.

AIR FRESHENERS

Most air fresheners use a solvent that
could affect the vehicle interior. If you use
an air freshener, take the following pre-
cautions:
.

Hanging-type air fresheners can cause

permanent discoloration when they
contact vehicle interior surfaces. Place
the air freshener in a location that
allows it to hang free and not contact
an interior surface.

Liquid-type air fresheners typically clip

on the vents. These products can cause
immediate damage and discoloration
when spilled on interior surfaces.

Carefully read and follow the manufac-
turer’s instructions before using air fresh-
eners.

FLOOR MATS

WARNING

To avoid potential pedal interference that
may result in a collision, injury or death:

NEVER place a floor mat on top of
another floor mat in the driver front
position or install then upside down or

backwards.

It is recommended that you use only
genuine INFINITI floor mats specifically
designed for use in your vehicle model
and model year. See your INFINITI
retailer for more information.

Properly position the mats in the floor-
well using the floor mat positioning
hook. See “Floor mat installation” (P.7-
6).

Make sure the floor mat does not
interfere with pedal operation.

Periodically check the floor mats to make
sure they are properly installed.

After cleaning the vehicle interior, check
the floor mats to make sure they are
properly installed.

The use of genuine INFINITI floor mats can
extend the life of your vehicle carpet and
make it easier to clean the interior. Mats
should be maintained with regular clean-
ing and replaced if they become exces-
sively worn.

Appearance and care

7-5

Condition:

-------------------------------------------------------------------------------------------------------------------------------------------------------------

(428,1)

Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]

7-6

Appearance and care

SAI0039

Floor mat installation

your vehicle is equipped with floor mat
positioning hook(s). The number and
shape of the floor mat positioning hook(s)
for each seating position varies depending
on the vehicle.
When installing genuine INFINITI floor
mats, follow the installation instructions
provided with the mat and the following:
1. Position the floor mat in the floorwell so

that the floor mat grommet holes are
aligned with the hook(s).

2. Secure the grommet holes into the

hook(s) and ensure that the floor mat

is properly positioned.

3. Make sure the floor mat does not

interfere with pedal operation. With
the ignition in the OFF position and
the shift lever in the P (Park) position,
fully apply and release all pedals. The
floor mat must not interfere with pedal
operation or prevent the pedal from
returning to its normal position.

See an INFINITI retailer for details about
installing the floor mats in your vehicle.

SAI0055

Positioning hooks

The illustration shows the location of the
floor mat positioning hooks.

SEAT BELTS

The seat belts can be cleaned by wiping
them with a sponge dampened in a mild
soap solution. Allow the belts to dry
completely before using them.
See “Seat belts” (P.1-12).

WARNING

Do not allow wet seat belts to roll up in the
retractor. NEVER use bleach, dye, or chemi-

Condition:

-------------------------------------------------------------------------------------------------------------------------------------------------------------

(429,1)

Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]

cal solvents to clean the seat belts, since
these materials may severely weaken the
seat belt webbing.

MOST COMMON FACTORS CONTRI-

BUTING TO VEHICLE CORROSION

The accumulation of moisture-retaining

dirt and debris in body panel sections,
cavities, and other areas.

Damage to paint and other protective

coatings caused by gravel and stone
chips or minor traffic accidents.

ENVIRONMENTAL FACTORS INFLU-

ENCE THE RATE OF CORROSION
Moisture

Accumulation of sand, dirt and water on
the vehicle body underside can accelerate
corrosion. Wet floor coverings will not dry
completely inside the vehicle, and should
be removed for drying to avoid floor panel
corrosion.

Relative humidity

Corrosion will be accelerated in areas of
high relative humidity, especially those
areas where the temperatures stay above
freezing where atmospheric pollution ex-
ists, or where road salt is used.

Temperature

A temperature increase will accelerate the
rate of corrosion to those parts which are
not well ventilated.

Air pollution

Industrial pollution, the presence of salt in
the air in coastal areas, or heavy road salt
use will accelerate the corrosion process.
Road salt will also accelerate the disinte-
gration of paint surfaces.

TO PROTECT YOUR VEHICLE FROM

CORROSION

Wash and wax your vehicle often to

keep the vehicle clean.

Always check for minor damage to the

paint and repair it as soon as possible.

Keep drain holes at the bottom of the

doors open to avoid water accumula-
tion.

Check the underbody for accumulation

of sand, dirt or salt. If present, wash
with water as soon as possible.

Appearance and care

7-7

CORROSION PROTECTION

Condition:

-------------------------------------------------------------------------------------------------------------------------------------------------------------

(430,1)

Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]

7-8

Appearance and care

CAUTION

NEVER remove dirt, sand or other debris
from the passenger compartment by
washing it out with a hose. Remove dirt
with a vacuum cleaner.

Never allow water or other liquids to
come in contact with electronic compo-
nents inside the vehicle as this may
damage them.

Chemicals used for road surface deicing
are extremely corrosive. They accelerate
corrosion and deterioration of underbody
components such as the exhaust system,
fuel and brake lines, brake cables, floor
pan and fenders.
In winter, the underbody must be cleaned
periodically.
For additional protection against rust and
corrosion, which may be required in some
areas, it is recommended you consult an
INFINITI retailer.

Condition:

-------------------------------------------------------------------------------------------------------------------------------------------------------------

(432,1)

Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]

8-2

Do-it-yourself

When performing any inspection or main-
tenance work on your vehicle, always take
care to prevent serious accidental injury to
yourself or damage to the vehicle. The
following are general precautions which
should be closely observed.

WARNING

Park the vehicle on a level surface, apply
the parking brake securely and block the
wheels to prevent the vehicle from
moving. Move the shift lever to P (Park).

Be sure the ignition switch is in the OFF
or LOCK position when performing any
parts replacement or repairs.

Never connect or disconnect the battery
or any transistorized component while
the ignition switch is in the ON position.

Never leave the engine or automatic
transmission related component har-
nesses disconnected while the ignition
switch is in the ON position.

If you must work with the engine
running, keep your hands, clothing, hair
and tools away from moving fans, belts
and any other moving parts.

It is advisable to secure or remove any
loose clothing and remove any jewelry,
such as rings, watches, etc. before
working on your vehicle.

Always wear eye protection whenever
you work on your vehicle.

If you must run the engine in an enclosed
space such as a garage, be sure there is
proper ventilation for exhaust gases to
escape.

Never get under the vehicle while it is
supported only by a jack. If it is
necessary to work under the vehicle,
support it with safety stands.

Keep smoking materials, flame and
sparks away from fuel tank and the
battery.

Your vehicle is equipped with an auto-
matic engine cooling fan. It may come on
at any time without warning, even if the
ignition key is in the OFF position and
the engine is not running. To avoid
injury, always disconnect the negative
battery cable before working near the
fan.

On gasoline engine models, the fuel
filter or fuel lines should be serviced
because the fuel lines are under high

pressure even when the engine is off. It
is recommended you visit an INFINITI
retailer for this service.

CAUTION

Do not work under the hood while the
engine is hot. Turn the engine off and
wait until it cools down.

Avoid direct contact with used engine oil
and coolant. Improperly disposed engine
oil, coolant, and/or other vehicle fluids
can damage the environment. Always
conform to local regulations for disposal
of vehicle fluid.

This “8. Do-it-yourself” section gives in-
structions regarding only those items
which are relatively easy for an owner to
perform.
A genuine INFINITI Service Manual is also
available. (See “Owner’s Manual/Service
Manual order information” (P.10-20).)
You should be aware that incomplete or
improper servicing may result in operating
difficulties or excessive emissions, and
could affect your warranty coverage. If in

MAINTENANCE PRECAUTIONS

Condition:

-------------------------------------------------------------------------------------------------------------------------------------------------------------

(433,1)

Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]

doubt about any servicing, it is recom-
mended you have it done by an INFINITI
retailer.

SSI0388

VQ37VHR ENGINE

Fuse/fusible link holder

Battery

Radiator filler cap

Engine oil dipstick

Engine oil filler cap

Brake fluid reservoir

Window washer fluid reservoir

Power steering fluid reservoir

Air cleaner

10. Drive belts
11. Engine coolant reservoir

Do-it-yourself

8-3

ENGINE COMPARTMENT CHECK LOCATIONS

Condition:

-------------------------------------------------------------------------------------------------------------------------------------------------------------

(434,1)

Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]

8-4

Do-it-yourself

The engine cooling system is filled at the
factory with a pre-diluted mixture of 50%
Genuine NISSAN Long Life Antifreeze/Cool-
ant (blue) and 50% water to provide year-
round anti-freeze and coolant protection.
The antifreeze solution contains rust and
corrosion inhibitors. Additional engine
cooling system additives are not neces-
sary.

WARNING

Never remove the radiator or coolant
reservoir cap when the engine is hot.
Wait until the engine and radiator cool
down. Serious burns could be caused by
high pressure fluid escaping from the
radiator. See precautions in “If your
vehicle overheats” (P.6-10).

The radiator is equipped with a pressure
type radiator cap. To prevent engine
damage, use only a genuine NISSAN
radiator cap.

CAUTION

Never use any cooling system additives
such as radiator sealer. Additives may

clog the cooling system and cause
damage to the engine, transmission
and/or cooling system.

When adding or replacing coolant, be
sure to use only Genuine NISSAN Long
Life Antifreeze/Coolant (blue) or equiva-
lent. Genuine NISSAN Long Life Anti-
freeze/Coolant (blue) is pre-diluted to
provide antifreeze protection to −348F
(−378C). If additional freeze protection is
needed due to weather where you
operate your vehicle, add Genuine
NISSAN Long Life Antifreeze/Coolant
(blue) concentrate following the direc-
tions on the container. If an equivalent
coolant other than Genuine NISSAN Long
Life Antifreeze/Coolant (blue) is used,
follow the coolant manufacturer’s in-
structions to maintain minimum anti-
freeze protection to −348F (−378C). The
use of other types of coolant solutions
other than Genuine NISSAN Long Life
Antifreeze/Coolant (blue) or equivalent
may damage the engine cooling system.

The life expectancy of the factory-fill
coolant is 105,000 miles (168,000 km)
or 7 years. Mixing any other type of
coolant other than Genuine NISSAN Long
Life Antifreeze/Coolant (blue), including

Genuine NISSAN Long Life Antifreeze/
Coolant (green), or the use of non-
distilled water will reduce the life ex-
pectancy of the factory-fill coolant. Refer
to the “9. Maintenance and schedules”
section of this Owner’s Manual for more
details.

ENGINE COOLING SYSTEM

Condition:

-------------------------------------------------------------------------------------------------------------------------------------------------------------

(435,1)

Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]

SDI2198

CHECKING ENGINE COOLANT LEVEL

Check the coolant level in the reservoir
when the engine is cold. If the coolant level
is below MIN

, open the reservoir tank

cap and add coolant up to the MAX

level. If the reservoir tank is empty, check
the coolant level in the radiator when the
engine is cold. If there is insufficient
coolant in the radiator, fill the radiator
with coolant up to the filler opening and
also add it to the reservoir tank up to the
MAX level

Tighten the cap securely after adding
engine coolant.

This vehicle contains Genuine NISSAN Long
Life Antifreeze/Coolant (blue). The life
expectancy of the factory-fill coolant is
105,000 miles (168,000 km) or 7 years.
Mixing any other type of coolant or the use
of non-distilled water will reduce the life
expectancy of the factory-fill coolant. Refer
to the “9. Maintenance and schedules”
section of this Owner’s Manual for more
details.
If the cooling system requires coolant
frequently, have it checked. It is recom-
mended you visit an INFINITI retailer for
this service.

CHANGING ENGINE COOLANT

It is recommended that major cooling
system repairs be performed by an INFINITI
retailer. The service procedures can be
found in the appropriate INFINITI Service
Manual.
Improper servicing can result in reduced
heater performance and engine overheat-
ing.

WARNING

To avoid the danger of being scalded,
never change the coolant when the

engine is hot.

Never remove the radiator cap when the
engine is hot. Serious burns could be
caused by high pressure fluid escaping
from the radiator.

Avoid direct skin contact with used
coolant. If skin contact is made, wash
thoroughly with soap or hand cleaner as
soon as possible.

Keep coolant out of reach of children and
pets.

Engine coolant must be disposed of
properly. Check your local regulations.

Do-it-yourself

8-5

Condition:

-------------------------------------------------------------------------------------------------------------------------------------------------------------

(436,1)

Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]

8-6

Do-it-yourself

SDI2045

CHECKING ENGINE OIL LEVEL

1. Park the vehicle on a level surface and

apply the parking brake.

2. Run the engine until it reaches operat-

ing temperature.

3. Turn off the engine. Wait more than 15

minutes for the oil to drain back into
the oil pan.

4. Remove the dipstick and wipe it clean.

Reinsert it all the way.

5. Remove the dipstick again and check

the oil level. It should be within the
range

. If the oil level is below

remove the oil filler cap and pour

recommended oil through the opening.
Do not overfill

6. Recheck oil level with the dipstick.
It is normal to add some oil between oil
maintenance intervals or during the break-
in period, depending on the severity of
operating conditions.

CAUTION

Oil level should be checked regularly.
Operating the engine with an insufficient
amount of oil can damage the engine, and
such damage is not covered by warranty.

CHANGING ENGINE OIL AND FILTER
Vehicle set-up

1. Park the vehicle on a level surface and

apply the parking brake.

2. Run the engine until it reaches operat-

ing temperature.

3. Turn the engine off and wait more than

15 minutes.

4. Raise and support the vehicle using a

suitable floor jack and safety jack
stands.

Place the safety jack stands under
the vehicle jack-up points.

A suitable adapter should be at-
tached to the jack stand saddle.

5. Remove the plastic engine undercover.

a. Remove the small plastic clip at the

center point of the undercover.

b. Then remove the other bolts that

hold the undercover in place.

CAUTION

Make sure the correct lifting and support
points are used to avoid vehicle damage.

ENGINE OIL

Condition:

-------------------------------------------------------------------------------------------------------------------------------------------------------------

(437,1)

Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]

SDI2335

Two-wheel drive (2WD) models

SDI2047

All-wheel drive (AWD) models

Engine oil and filter

1. Place a large drain pan under the drain

plug.

2. Remove the oil filler cap.
3. Remove the drain plug

with a

wrench and completely drain the oil.

CAUTION

Be careful not to burn yourself, as the
engine oil is hot.

Waste oil must be disposed of
properly.

Check your local regulations.

4. (Perform steps 4 to 7 only when the

engine oil filter change is needed.)
Loosen the oil filter

with an oil filter

wrench. Remove the oil filter by turning
it by hand.

5. Wipe the engine oil filter mounting

surface with a clean rag.

CAUTION

Be sure to remove any old rubber gasket
remaining on the mounting surface of the

engine. Failure to do so could lead to engine
damage.

6. Coat the gasket on the new filter with

clean engine oil.

7. Screw in the oil filter clockwise until a

slight resistance is felt, then tighten
additionally more than 2/3 turn.
Oil filter tightening torque:

11 to 15 ft-lb
(14.7 to 20.5 N·m)

8. Clean and re-install the drain plug with

a new washer. Securely tighten the
drain plug with a wrench.
Drain plug tightening torque:

22 to 29 ft-lb
(29 to 39 N·m)

Do not use excessive force.

9. Refill engine with recommended oil and

install the oil filler cap securely.
See “Capacities and recommended
fluids/lubricants” (P.10-2) for drain
and refill capacity. The drain and refill
capacity depends on the oil tempera-
ture and drain time. Use these specifi-
cations for reference only. Always use
the dipstick to determine the proper

Do-it-yourself

8-7

Condition:

-------------------------------------------------------------------------------------------------------------------------------------------------------------

(438,1)

Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]

8-8

Do-it-yourself

amount of oil in the engine.

10.Start the engine and check for leakage

around the drain plug and the oil filter.
Correct as required.

11.Turn the engine off and wait more than

15 minutes. Check the oil level with the
dipstick. Add engine oil if necessary.

After the operation

1. Install the engine undercover into

position as the following steps.
a. Pull the center of the small plastic

clip out.

b. Hold the engine undercover into

position.

c. Insert the clip through the under-

cover into the hole in the frame, then
push the center of the clip in to lock
the clip in place.

d. Install the other bolts that hold the

undercover in place. Be careful not
to strip the bolts or over-tighten
them.

2. Lower the vehicle carefully to the

ground.

3. Dispose of waste oil and filter properly.

WARNING

Prolonged and repeated contact with
used engine oil may cause skin cancer.

Try to avoid direct skin contact with used
oil. If skin contact is made, wash
thoroughly with soap or hand cleaner
as soon as possible.

Keep used engine oil out of reach of
children.

When checking or replacement is required,
we recommend an INFINITI retailer for
servicing.

CAUTION

It is recommended you use only Genuine
NISSAN Matic S ATF. Do not mix with
other fluids.

INFINITI recommends using Genuine
NISSAN Matic S ATF ONLY in INFINITI
automatic transmissions. Do not mix
with other fluids. Using fluids that are
not equivalent to Genuine NISSAN Matic
S ATF may damage the automatic trans-
mission. Damage caused by the use of
fluids other than as recommended is not
covered under the INFINITI’s new vehicle
limited warranty.

AUTOMATIC TRANSMISSION FLUID (ATF)

Condition:

-------------------------------------------------------------------------------------------------------------------------------------------------------------

(439,1)

Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]

SDI1765A

Check the fluid level in the reservoir.
The fluid level should be checked using the
HOT range (

: HOT MAX.,

: HOT MIN.)

at fluid temperatures of 122 to 1768F (50 to
808C) or using the COLD range (

: COLD

MAX.,

: COLD MIN.) at fluid tempera-

tures of 32 to 868F (0 to 308C).
If the fluid is below the MIN line, add
Genuine NISSAN PSF or equivalent. Re-
move the cap and fill through the opening.

CAUTION

Do not overfill.

Use Genuine NISSAN PSF or equivalent.

For further brake fluid specification infor-
mation, see “Capacities and recommended
fluids/lubricants” (P.10-2).

WARNING

Use only new fluid from a sealed contain-
er. Old, inferior or contaminated fluid
may damage the brake system. The use
of improper fluids can damage the brake
system and affect the vehicle’s stopping
ability.

Be sure to clean the filler cap before
removing.

Brake fluid is poisonous and should be
stored carefully in marked containers out
of the reach of children.

CAUTION

Do not spill the fluid on painted surfaces.
This will damage the paint. If fluid is spilled,
wash the surface with water.

Do-it-yourself

8-9

POWER STEERING FLUID

BRAKE FLUID

Condition:

-------------------------------------------------------------------------------------------------------------------------------------------------------------

(440,1)

Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]

8-10

Do-it-yourself

SDI2025

Check the fluid level in the reservoir. If the
fluid is below the MIN line

or the brake

warning light comes on, add Genuine
NISSAN Super Heavy Duty Brake Fluid or
equivalent DOT 3 fluid up to the MAX line

. If fluid must be added frequently, the

system should be checked. It is recom-
mended you visit an INFINITI retailer for
this service.

SDI2191

WARNING

Antifreeze is poisonous and should be
stored carefully in marked containers out
of the reach of children.

Fill the window washer fluid reservoir
periodically. Add window washer fluid
when the low window washer fluid warning
appears on the vehicle information display.
To fill the window washer fluid reservoir,
lift the cap off the reservoir tank and pour
the window washer fluid into the tank
opening.

Add a washer solvent to the washer for
better cleaning. In the winter season, add a
windshield washer antifreeze. Follow the
manufacturer’s instructions for the mixture
ratio.
Refill the reservoir more frequently when
driving conditions require an increased
amount of window washer fluid.
Recommended fluid is Genuine NISSAN
Windshield Washer Concentrate Cleaner &
Antifreeze or equivalent.

CAUTION

Do not substitute engine anti-freeze
coolant for window washer solution. This
may result in damage to the paint.

Do not fill the window washer reservoir
tank with washer fluid concentrates at
full strength. Some methyl alcohol
based washer fluid concentrates may
permanently stain the grille if spilled
while filling the window washer reser-
voir tank.

Pre-mix washer fluid concentrates with
water to the manufacturer’s recom-
mended levels before pouring the fluid
into the window washer reservoir tank.

WINDOW WASHER FLUID

Condition:

-------------------------------------------------------------------------------------------------------------------------------------------------------------

(441,1)

Model: 2017MY INFINITI QX50(J50) OM17E00J50U0 ]

Do not use the window washer reservoir
tank to mix the washer fluid concentrate
and water.

Keep the battery surface clean and dry.

Clean the battery with a solution of
baking soda and water.

Make certain the terminal connections

are clean and securely tightened.

If the vehicle is not to be used for 30

days or longer, disconnect the negative
(−) battery terminal cable to prevent
discharging it.

NOTE:
Care should be taken to avoid situations
that can lead to potential battery dis-
charge and potential no-start conditions
such as:
1. Installation or extended use of electro-

nic accessories that consume battery
power when the engine is not running
(Phone chargers, GPS, DVD players,
etc.)

2. Vehicle is not driven regularly and/or

only driven short distances.

In these cases, the battery may need to be
charged to maintain battery health.

WARNING

Do not expose the battery to flames or
electrical sparks. Hydrogen gas gener-

ated by the battery is explosive. Do not
allow battery fluid to contact your skin,
eyes, fabrics, or painted surfaces. After
touching a battery or battery cap, do not
touch or rub your eyes. Thoroughly wash
your hands. If the acid contacts your
eyes, skin or clothing, immediately flush
with water for at least 15 minutes and
seek medical attention.

Do not operate the vehicle if the fluid in
the battery is low. Low battery fluid can
cause a higher load on the battery which
can generate heat, reduce battery life,
and in some cases lead to an explosion.

When working on or near a battery,
always wear suitable eye protection and
remove all jewelry.

Battery posts, terminals and related
accessories contain lead and lead com-
pounds. Wash hands after handling.

Keep the battery out of the reach of
children.

Do-it-yourself

8-11

BATTERY

Condition:

-------------------------------------------------------------------------------------------------------------------------------------------------------------

Infiniti QX50/EX (2017 year). Manual - part 27