|
|
6. Insert a flat-blade screwdriver into the grommet hole to add 90° turn onto the 䊊 E . Mark the center of the hole 䊊 F on both sides with a felt-tip pen. Remove the bracket from the 䊊 F as a center. 7. Insert a J-nut into the license plate bracket before placing the license plate bracket 8. Install the license plate bracket with screws. 9. Install the license plate with bolts that are no longer than 0.55 in (14 mm). WARNING ● It is extremely dangerous to ride in a ● Do not allow people to ride in any area of vehicle that is not equipped with ● Be sure everyone in your vehicle is in a seat and using a seat belt properly. TERMS It is important to familiarize yourself ● Curb Weight (actual weight of your does not include passengers and cargo. STI0723 VEHICLE LOADING INFORMATION Technical and consumer information 9-15 췽 — — 墍 |