|
|
DAS C1F06 CAN CIRCUIT2 DAS-173 < DTC/CIRCUIT DIAGNOSIS > [DCA] C D E F G H I J K L M B N P A C1F06 CAN CIRCUIT2 DTC Logic INFOID:0000000006223598 DTC DETECTION LOGIC NOTE: "ACCELERATOR PEDAL ACTUATOR : DTC Logic" . DTC CONFIRMATION PROCEDURE 1. PERFORM DTC CONFIRMATION PROCEDURE 1. Start the engine. 2. Turn the DCA system ON. 3. Perform “All DTC Reading” with CONSULT-III. 4. Check if the “C1F06” is detected as the current malfunction in “Self Diagnostic Result” of “ACCELE Is “C1F06” detected as the current malfunction? YES >> Refer to DAS-173, "Diagnosis Procedure" NO >> Refer to GI-40, "Intermittent Incident" . Diagnosis Procedure INFOID:0000000006223599 1. CHECK SELF-DIAGNOSIS RESULTS Check if “U1000” is detected other than “C1F06” in “Self Diagnostic Result” of “ACCELE PEDAL ACT”. Is “U1000” detected? YES >> Perform the CAN communication system inspection. Repair or replace the malfunctioning parts. DAS-182, "ACCELERATOR PEDAL ACTUATOR : DTC Logic" NO >> GO TO 2. 2. REPLACE ADAS CONTROL UNIT 1. Turn the ignition switch OFF. 2. Replace the ADAS control unit. Refer to DAS-63, "Removal and Installation" . 3. Erases All self-diagnosis results. 4. Perform “All DTC Reading” again. 5. Check if the “C1F06” is detected in self-diagnosis results of “ACCELE PEDAL ACT”. Is “C1F06” detected? YES >> Replace the accelerator pedal assembly. Refer to . NO >> INSPECTION END DTC Trouble diagnosis name DTC detecting condition Possible causes C1F06 CAN CIR 2 If accelerator pedal actuator detects an error ADAS control unit |