Infiniti G35 (V35). Manual - part 176

INTELLIGENT KEY SYSTEM

BL-91

WARNING CHIME FUNCTION
Operation Description

The warning chimes are as follows and are given to the user as warning information and warnings using com-
binations of Intelligent Key warning buzzer (in instrument panel and engine room), and warning lamps “KEY”
and “P-SHIFT”.

●

Ignition switch warning chime

●

Ignition key warning chime

●

OFF position warning chime

●

OFF position warning chime (after door closed)

●

Take away warning chime

●

Take away warning chime (from window)

●

Door lock operation warning chime

●

Intelligent key low battery warning

●

P position warning

BL-92

INTELLIGENT KEY SYSTEM

Operation Condition

Operation

Condition

Intelligent Key warning

buzzer sounds

Warning lamp

illuminates

Ignition switch warning chime

●

Key switch is OFF.

●

Ignition switch is in the ACC, OFF or LOCK position.
[ignition switch is pressed (ignition knob switch is
ON).]

●

Driver door is open.

Instrument panel side

—

Ignition key warning chime
(When mechanical key is
used)

●

Mechanical key is inserted in ignition switch (key
switch is ON).

●

Ignition switch is in the ACC, OFF or LOCK position.

●

Driver door is open.

Instrument panel side

—

OFF position warning chime

●

Ignition switch is turned from ACC to OFF.
[ignition switch is pressed (ignition knob switch is
ON).]

●

Ignition switch is in the LOCK position and pressed
for 1 second.

Instrument panel side

—

OFF position warning chime
(after door closed)

When driver door is opened and then closed while the
OFF position warning chime above is operating

Engine room side

—

Take away warning chime

●

Engine is running.

●

Door open to close.

●

Intelligent Key is not found inside vehicle.

Engine room side

“KEY” (red)

Take away warning chime
(from window)

●

Engine is running.

●

Door is closed.

●

Intelligent Key is not found inside vehicle.

Instrument panel side

“KEY” (red)

Door lock operation warning
chime

When request switch is pushed under the following
conditions

●

All door are closed

●

Door is unlocked.

●

Intelligent Key is inside vehicle.

●

Ignition switch is not pressed.

Engine room side

—

When request switch is pushed under the following
conditions

●

All door are closed

●

Door is unlocked.

●

Ignition switch is pressed.

●

Intelligent Key is within the detection area of oper-
ated request switch.

Engine room side

—

When request switch is pushed under the following
conditions

●

Any door is opened.

●

Intelligent Key is within the detection area of oper-
ated request switch.

Engine room side

—

Intelligent Key low battery
warning

When Intelligent Key is low battery, Intelligent Key unit
is detected after ignition switch is turned ON.

—

“KEY” (green)

P position warning

When selector lever is except for P position, ignition
switch is turned from ON to OFF.

—

“P-SHIFT”

INTELLIGENT KEY SYSTEM

BL-93

List of Operation Related Parts

Parts marked with

are the parts related to operation.

CHANGE SETTINGS FUNCTION

The settings for each function can be changed with the CONSULT-II.

Changing Settings Using CONSULT-II

The settings for the Intelligent Key system functions can be changed using CONSULT-II (WORK SUPPORT).
Refer to

BL-115, "WORK SUPPORT"

NOTE:
Once a function setting is changed, it will remain effective even if the battery is disconnected.

INTELLIGENT KEY REGISTRATION

Intelligent Key-ID registration is performed using the CONSULT-II.

CAUTION:

●

After a new Intelligent Key-ID is registered, be sure to check the function.

●

When registering an additional Intelligent Key-ID, take any Intelligent Keys already registered and
Intelligent Keys for any other vehicles out of the vehicle before starting.

CONSULT-II can be used to check and delete Intelligent Key-IDs.
For future information, see the CONSULT-II Operation Manual NATS.

Warning and alarm functions

llig

t Ke

y s

Igni

nob

Igni

ch AC

posi

t si

Igni

ch O

posi

t si

gna

r s

wit

r r

t s

wit

de ke

y ant

enna

ide

y a

nna

(

ver

, Pas

ger

)

ide

y a

nna

(

rea

bum

per

)

lli

gen

t Key w

ing buz

llig

t Ke

com

uni

on sy

BCM

tio

pos

ion sw

Ignition switch warning chime

Ignition key warning chime
(When mechanical key used)

OFF position warning chime

OFF position warning chime
(after door close)

Take away warning chime

Take away warning chime (from window)

Door lock operation warning chime

Intelligent Key low battery warning

P position warning

BL-94

INTELLIGENT KEY SYSTEM

STEERING LOCK UNIT REGISTRATION
Steering Lock Unit ID Registration

CAUTION:

●

The method for registering a steering lock unit ID depends on the status of the steering lock unit
and Intelligent Key unit (new or old unit).

●

After registration is completed, press ignition switch with an Intelligent Key in the vehicle so that it
can be turned, and confirm that it cannot be turned even when ignition switch is pressed without
an Intelligent Key in the vehicle.

For future information, see the CONSULT-II Operation Manual NATS-IVIS/NVIS.

CAN Communication System Description

NIS001JH

CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle mul-
tiplex communication line with high data communication speed and excellent error detection ability. Many elec-
tronic control units are equipped onto a vehicle, and each control unit shares information and links with other
control units during operation (not independent). In CAN communication, control units are connected with 2
communication lines (CAN H line, CAN L line) allowing a high rate of information transmission with less wiring.
Each control unit transmits/receives data but selectively reads required data only.

CAN Communication Unit

NIS001JI

Refer to

LAN-47, "CAN System Specification Chart"

Content .. 174 175 176 177 ..