|
|
BACK DOOR OPENER SWITCH DLK-87 < DTC/CIRCUIT DIAGNOSIS > C D E F G H I J L M A B DLK N O P Is the inspection result normal? YES >> Replace BCM. Refer to BCS-83, "Removal and Installation" NO >> Repair harness or connector. 3. CHECK BACK DOOR OPENER SWITCH GROUND CIRCUIT Check continuity between back door opener switch harness connector and ground. Is the inspection result normal? YES >> GO TO 4. NO >> Repair or replace harness. 4. CHECK BACK DOOR OPENER SWITCH DLK-87, "Component Inspection" Is the inspection result normal? YES >> GO TO 5. NO >> Replace back door opener switch. Refer to EXT-49, "Removal and Installation" . 5. CHECK INTERMITTENT INCIDENT GI-36, "Intermittent Incident" . >> INSPECTION END Component Inspection INFOID:0000000005239576 1. CHECK BACK DOOR OPENER SWITCH 1. Turn ignition switch OFF. 2. Disconnect back door opener switch connector. 3. Check continuity between back door opener switch terminals. Is the inspection result normal? YES >> INSPECTION END NO >> Replace back door opener switch. Refer to EXT-49, "Removal and Installation" . Back door opener switch Ground Continuity Connector Terminal D114 2 Existed Terminal Condition Continuity Back door opener switch 1 2 ON (press and hold) Existed OFF (release) Not existed |