|
|
DOOR SWITCH DLK-71 < DTC/CIRCUIT DIAGNOSIS > C D E F G H I J L M A B DLK N O P Is the inspection result normal? YES >> Replace BCM. Refer to BCS-83, "Removal and Installation" NO >> Repair or replace harness. 3. CHECK BACK DOOR SWITCH GROUND CIRCUIT Check continuity between back door lock assembly (back door switch) harness connector and ground. Is the inspection result normal? YES >> GO TO 4. NO >> Repair or replace harness. 4. CHECK DOOR SWITCH DLK-71, "Component Inspection" Is the inspection result normal? YES >> GO TO 5. NO >> Replace malfunctioning door switch. • Door switch: Refer to DLK-280, "Removal and Installation" . • Back door lock assembly (back door switch): Refer to DLK-277, "Removal and Installation" 5. CHECK INTERMITTENT INCIDENT GI-36, "Intermittent Incident" . >> INSPECTION END Component Inspection INFOID:0000000005239541 1. CHECK DOOR SWITCH 1. Turn ignition switch OFF. 2. Disconnect door switch connector. 3. Check door switch terminals. Is the inspection result normal? YES >> INSPECTION END NO >> Replace malfunction door switch. • Door switch: Refer to DLK-280, "Removal and Installation" . • Back door lock assembly (back door switch): Refer to DLK-277, "Removal and Installation" BCM Ground Continuity Connector Terminal M123 150 (Driver side) Not existed 124 (Passenger side) M121 69 (Rear LH) 68 (Rear RH) 66 (Back door) Back door lock assembly (back door switch) Ground Continuity Connector Terminal D122 8 Existed Terminal Door switch condition Continuity Door switch Each door 2 Ground part of door switch Pressed Not existed Released Existed Back door 7 8 Pressed Not existed Released Existed |