|
|
Content .. 1664 1665 1666 1667 ..
B2609 STEERING STATUS SEC-77 < DTC/CIRCUIT DIAGNOSIS > [INTELLIGENT KEY SYSTEM] C D E F G H I J L M A B SEC N O P B2609 STEERING STATUS Description INFOID:0000000005249497 There are 2 switches in the steering lock unit (steering lock/unlock switch 1 and 2). BCM compares those 2 DTC Logic INFOID:0000000005249498 DTC DETECTION LOGIC NOTE: • If DTC B2609 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to DTC CONFIRMATION PROCEDURE 1. PERFORM DTC CONFIRMATION PROCEDURE 1 1. Press the push-button ignition switch under the following conditions and wait for at least 1 second. - Selector lever is in the P or N position. - Do not depress brake pedal. 2. Check “Self diagnostic result” with CONSULT-III. Is DTC detected? YES >> Go to NO >> GO TO 2. 2. PERFORM DTC CONFIRMATION PROCEDURE 2 1. Turn ignition switch ON. 2. Turn ignition switch OFF. 3. Press driver side door switch and wait for at least 1 second. 4. Check “Self diagnostic result” with CONSULT-III. Is DTC detected? YES >> Go to NO >> INSPECTION END Diagnosis Procedure INFOID:0000000005249499 1. INSPECTION START Check the case in which DTC is detected. In which case is DTC detected? Case1 >> GO TO 2. 2. CHECK BCM OUTPUT SIGNAL DTC No. Trouble diagnosis name DTC detecting condition Possible cause B2609 S/L STATUS BCM detects the malfunction of steering lock unit • Harness or connectors [Steering lock unit circuit (BCM • Harness or connectors [Steering lock unit circuit (IPDM E/ • Steering lock unit |