|
|
Content .. 1610 1611 1612 1613 ..
C1D12 SHOCK ABSORBER ACTUATOR SCS-33 < DTC/CIRCUIT DIAGNOSIS > C D F G H I J K L M A B SCS N O P 3. CHECK FRONT RH SHOCK ABSORBER ACTUATOR Perform the front RH shock absorber actuator. Refer to SCS-33, "Component Inspection" Is the inspection result normal? YES >> GO TO 4. NO >> Replace the front RH shock absorber. Refer to 4. PERFORM DATA MONITOR With CONSULT-III 1. Start the engine. 2. Select “DATA MONITOR” of “E-SUS”. 3. Select “FR ACTUATOR CRNT” of “DATA MONITOR” screen. 4. Drive the vehicle and check whether it is within the following range. Is the inspection result normal? YES >> Check pin terminal and connection of each harness connector for damage or loose connections. Repair or replace error-detected parts. NO >> Replace E-SUS control unit. Refer to Component Inspection INFOID:0000000005588939 1. PERFORM ACTIVE TEST With CONSULT-III 1. Connect the E-SUS control unit harness connector and front RH shock absorber actuator harness con- 2. Select “FRONT RIGHT ACTUATOR” in “ACTIVE TEST”. 3. On the display, change the “Operation half cycle”, and check that the operation noise is heard from the Is the inspection result normal? YES >> INSPECTION END NO >> Replace the front RH wheel shock absorber. Refer to . FR ACTUATOR CRNT : Approx. 0.65 – 2.0 A Test item Display Item Display Operation half cycle SHOCK ABSORBER ACTUATOR FRONT RIGHT ACTUATOR 0.1 seconds – 1 second (cycle in 0.1 seconds) |