Content   ..  8  9  10  11   ..

Hyundai Azera (2017 year). Instruction - part 10

Features of your vehicle

LCD display warning

Key not detected

Low key battery

(if equipped)

■ Type A

■ Type B

■ Type A

■ Type B

Key not in vehicle

■ Type A

■ Type B

OHG045073L

OHG045075L

If the smart key is not in the vehicle

If the ENGINE START/STOP button

OHG045072L

or is not detected and you press the

changes to the OFF position when

If the smart key is not in the vehicle

ENGINE START/STOP button, the

the smart key in the vehicle dis-

and if any door is opened or closed

warning illuminates on the LCD dis-

charges, the warning illuminates on

with the ENGINE START/STOP but-

play for 10 seconds. Also, the immo-

the LCD display for about 10 sec-

ton in the ACC, ON, or START posi-

bilizer indicator blinks for

10 sec-

onds. Also, the warning chime

tion, the warning illuminates on the

onds.

sounds once.

LCD display. Also, the chime sounds

Replace the battery with a new one.

for 5 seconds when the smart key is

not in the vehicle and the door is

closed.

Always have the smart key with you.

4 88

Features of your vehicle

Press brake pedal to start engine

Shift to "P" position

Press start button again

■ Type A

■ Type B

■ Type A

■ Type B

■ Type A

■ Type B

OHG045076L

OHG045077L

OHG045078L

If the ENGINE START/STOP button

If you try to turn off the engine with-

If you can not operate the ENGINE

changes to the ACC position twice

out the shift lever in the P

(Park)

START/STOP button when there is a

by pressing the button repeatedly

position, the ENGINE START/STOP

problem with

the

ENGINE

without depressing the brake pedal,

button changes to the ACC position.

START/STOP button system, the

the warning illuminates on the LCD

If the button is pressed once more it

warning illuminates for 10 seconds

display for about 10 seconds to indi-

will change to the ON position. The

and the chime sounds to indicate

cate that you should depress the

warning illuminates on the LCD dis-

that you could start the engine by

brake pedal to start the engine.

play for about 10 seconds to indicate

pressing the ENGINE START/STOP

that you should press the ENGINE

button once more.

START/STOP button with the shift

The chime will stop if the ENGINE

lever in the P (Park) position to turn

START/STOP button system works

off the engine.

normally or the theft alarm system is

Also, the warning chime sounds for

armed.

about 10 seconds. (if equipped)

If the warning illuminates each time

you push the start/stop button, we

recommend that the system be

checked by an authorized HYUNDAI

dealer.

4 89

Features of your vehicle

Shift to "P" or "N" to start the

Please press start button with key

Check "Brake switch" fuse

engine

■ Type A

■ Type B

■ Type A

■ Type B

■ Type A

■ Type B

OHG045074L

OHG045082L

OHG045079L

If you press the ENGINE START/

When the brake switch fuse is dis-

If you try to start the engine with the

STOP button while the warning “Key

connected, the warning illuminates

shift lever not in the P (Park) or N

is not detected” illuminates the warn-

for 10 seconds on the LCD display.

(Neutral) position, the warning illumi-

ing “Press the start button with key”

Replace the fuse with a new one. If

nates for about 10 seconds on the

illuminates for

10 seconds on the

that is not possible you can start the

LCD display.

LCD display. Also, the immobilizer

engine by pressing the ENGINE

You can also start the engine with

indicator blinks for 10 seconds.

START/STOP button for 10 seconds

the shift lever in the N (Neutral) posi-

in ACC.

tion, but for your safety start the

engine with the shift lever in the P

(Park) position.

4 90

Features of your vehicle

Door /Trunk open

Sunroof open (if equipped)

Illumination

■ Type A

■ Type B

■ Type A

■ Type B

■ Type A

■ Type B

OHG045085L

OHG045249L

OHG045313L

This indicator displays which door (or

This warning message illuminates if

The illumination intensity of the

trunk) is opened.

you turn off the engine when the sun-

instrument panel is shown when

roof is open.

adjusting it with the illumination con-

trol switch.

4 91

Features of your vehicle

Low washer fluid

Parking assist warning

Low Tire Pressure

■ Type A

■ Type B

■ Type A

■ Type B

■ Type A

■ Type B

OHG045087L

OHG045086N

OHG045246L

This warning light illuminates for 12

Displays the area an obstacle is

This warning message illuminates if

seconds when the washer fluid

detected while moving forward or

the tire pressure is low with the

reservoir is nearly empty. Refill the

rearward.

Engine/Start button in ON position.

washer fluid as soon as possible.

For more details, refer to "Tire

Pressure Monitoring System

(TPMS)" in chapter 6.

4 92

Features of your vehicle

Turn on "FUSE SWITCH"

Align steering wheel (if equipped)

Steering wheel aligning is completed

(if equipped)

■ Type A

■ Type B

■ Type A

■ Type B

■ Type A

■ Type B

OHG045319L

OHG045332L/OHG045244N

OHG045333L/OHG045243L

This warning message illuminates if

This warning message illuminates if

the fuse switch located on the fuse

you start the engine when the steer-

If the steering wheel aligning is com-

box under the steering wheel is OFF.

ing wheel is turned to more than 90

pleted after

“Align steering wheel”

It means that you should turn the

degrees to the left or right.

warning message is displayed, this

fuse switch on.

It means that you should turn the

message is displayed for 2 seconds.

steering wheel and make the angle

of the steering wheel be less than 30

For more details, refer to “Fuses”

degrees.

in chapter 7.

4 93

Features of your vehicle

Low Fuel

Engine has overheated

■ Type A

■ Type B

■ Type A

■ Type B

OHG045527L

OHG045256L

This warning message illuminates if

This warning message illuminates

the fuel tank is nearly empty.

when the engine coolant tempera-

- When the low fuel level warning

ture is above

248°F (120°C). This

light is illuminated.

means that the engine is overheated

- When the trip computer displays "---

and may be damaged.

mile (or km)" as distance to empty.

If your vehicle is overheated, refer

to "Overheating" in chapter 6.

Add fuel as soon as possible.

4 94

Features of your vehicle

REAR PARKING ASSIST SYSTEM (IF EQUIPPED)

■ Type A

WARNING - Rear

parking

The rear parking assist system

is a supplementary function

only. The operation of the rear

parking assist system can be

affected by several factors

(including environmental condi-

tions). To avoid collision with

OHG040123

children, pedistrians, objects, or

Sensors

■ Type B

OHG045088

vehicles, the driver should

always check the area behind

The rear parking assist system

the vehicle before and while

assists the driver during reverse

backing up, otherwise serious

movement of the vehicle by chiming

injuries could occur.

if any object is sensed within a dis-

tance of 47 in. (120 cm) behind the

vehicle. This system is a supplemen-

tal system and it is not intended to

nor does it replace the need for

extreme care and attention of the

OHG046301N

driver. The sensing range and

Rear parking assist system

objects detectable by the back sen-

OFF button

sors are limited. Whenever backing-

up, pay as much attention to what is

To turn off the rear parking assist

system, push the button (the indica-

behind you as you would in a vehicle

without a rear parking assist system.

tor light will illuminate).

4 95

Features of your vehicle

Operation of the rear parking

Types of warning sound and indi-

✽ NOTICE

assist system

cator

• The indicator may differ from the

Operating condition

illustration according to the objects

Types of warning sound

Indicator

• This system will activate when

or sensors status.

backing up with the ignition switch

When an object is 47 in. to 24

• If the indicator blinks, have the

ON.

in. (120 cm to 60 cm) from the

system checked by an authorized

HYUNDAI dealer.

• The sensing distance while the

rear bumper : Buzzer beeps

• The actual indicator in the vehicle

rear parking assist system is in

intermittently.

may be different from the illustra-

operation is approximately 47 in.

(120 cm).

When an object is 24 in. to 12

tion.

in. (60 cm to 30 cm) from the

• When more than two objects are

rear bumper : Buzzer beeps

sensed at the same time, the clos-

more frequently.

est one will be recognized first.

✽ NOTICE

When an object is within 12

in. (30 cm) of the rear bumper

The parking assist system may not

operate if the vehicle’s distance from

: Buzzer beeps continuously.

the object is already less than

approximately 12 in (30 cm) when

the system is ON.

4 96

Features of your vehicle

This system can only sense objects

Self-diagnosis

within the range and location of the

WARNING - Objects

When you shift the gear to the R

sensors; it can not detect objects in

Pay close attention when the

(Reverse) position and if one or more

other areas where sensors are not

vehicle is driven close to

of the below occurs you may have a

installed. Also, small or slim objects,

objects on the road, particularly

malfunction in the rear parking assist

such as poles or objects located

pedestrians, and especially

system.

between sensors may not be detect-

children. Be aware that some

• You do not hear an audible warning

ed by the sensors.

objects may not be detected by

sound or if the buzzer sounds inter-

Always visually check behind the

the sensors, due to the object’s

mittently.

vehicle when backing up.

distance, size or material, all of

Be sure to inform any drivers of the

which can limit the effective-

ness of the sensor. To avoid col-

•

is displayed.

vehicle that may be unfamiliar with

the system regarding the systems

lisions with children, pedistri-

(blinks)

capabilities and limitations.

ans, objects, and vehicles,

always perform a visual inspec-

If this occurs, have your vehicle

tion to make sure the vehicle is

checked by an authorized HYUNDAI

clear of all obstructions before

dealer as soon as possible.

moving the vehicle in any direc-

tion. Otherwise serious injuries

✽ NOTICE

could occur.

Your new vehicle warranty does not

cover any accidents or damage to

the vehicle or injuries to its occu-

pants due to a rear parking assist

system malfunction. Always drive

safely and cautiously.

4 98

Features of your vehicle

REARVIEW CAMERA (IF EQUIPPED)

WARNING - Rearview

WARNING - Backing &

camera

using camera

The rear view camera is not a

Never rely solely on the rear

safety device. It only serves to

view camera when reversing.

assist the driver in identifying

You must always view the area

objects directly behind the mid-

behind you including looking

dle of the vehicle. The camera

over both shoulders as well as

does NOT cover the complete

continuously checking all three

area behind the vehicle. While

rear view mirrors. Due to the dif-

the camera's display is general-

ficulty of ensuring that the area

OHG043095A

ly accurate, objects can be

behind you remains clear,

much closer than they appear in

always back slowly and stop

The rearview camera will activate

the display screen and can be

immediately if you even suspect

when the back-up light is ON with the

distorted in both size and pro-

that a person, and especially a

ignition switch ON and the shift lever

portion.

child, might be behind you.

in the R (Reverse) position.

Otherwise serious injury or

This system is a supplemental sys-

death could occur.

tem that shows behind the vehicle

through the display monitor while

backing-up.

Always keep the camera lens clean.

If the lens is covered with foreign

matter, the camera may not operate

normally.

4 99

Features of your vehicle

HAZARD WARNING

LIGHTING

FLASHER

•

You can operate the turn signals

Battery saver function

when the hazard flasher is on. The

•

The purpose of this feature is to

hazard flasher will rework when

prevent the battery from being dis-

you turn off the turn signals.

charged. The system automatically

•

The hazard flasher will stop if you

turns off the parking lights when

push the switch one time while the

the driver turns off the engine and

turn signals and the hazard flasher

opens the driver-side door.

work simultaneously. To turn the

•

With this feature, the parking lights

hazard warning lights on again,

will be turned off automatically if

push the switch a second time.

the driver parks on the side of the

road at night.

If necessary, to keep the lights on

OHG045517

when the engine is turned off, per-

The hazard warning flasher should

form the following:

be used whenever you find it neces-

1) Open the driver-side door.

sary to stop the car in a hazardous

2) Turn the parking lights OFF and

location. When you must make such

ON again using the light switch

an emergency stop, always pull off

on the steering column.

the road as far as possible.

The hazard warning lights are turned

on by pushing in the hazard switch.

CAUTION

This causes all turn signal lights to

If the driver gets out of the vehi-

blink. The hazard warning lights will

cle through other doors, the bat-

operate even though the key is not in

tery saver function does not

the ignition switch.

operate.

To turn the hazard warning lights off,

Therefore, it causes the battery

push the switch a second time.

to be discharged. In this case,

make sure to turn off the lamp

before getting out of the vehicle.

4 100

Features of your vehicle

OHG041110A

OHG041111A

OHG041112A

Lighting control

Parking light position (

)

Headlight position (

)

The light switch has a Headlight and

When the light switch is in the park-

When the light switch is in the head-

a Parking light position.

ing light position, the position,

light position, the head, position and

To operate the lights, turn the knob at

license and instrument panel lights

license plate lights are ON.

are ON and the position light indica-

the end of the control lever to one of

The ignition switch must be in the ON

the following positions:

tor is ON.

position to turn on the headlights.

(1) OFF position

(2) Parking light position

(3) Headlight position

(4) Auto light position (if equipped)

4 102

Features of your vehicle

•

Never place anything over sensor

(1) located on the instrument

panel. This will ensure better auto-

light system control.

•

Do not clean the sensor using a

window cleaner. The cleaner may

leave a light film which could inter-

fere with sensor operation.

•

If your vehicle has window tint or

other types of metallic coating on

the front windshield, the Auto light

OHG041113A

system may not work properly.

OHG041115A

Auto light position

High beam operation

When the light switch is in the AUTO

To turn on the high beam headlights,

light position, the parking lights and

push the lever away from you. Pull it

headlights will be turned ON or OFF

back for low beams.

automatically depending on the

The high beam indicator will light

amount of light outside the vehicle.

when the headlight high beams are

switched on.

To prevent the battery from being

discharged, do not leave the lights

on for a prolonged time while the

engine is not running.

4 103

Features of your vehicle

Operating condition

1. Place the light switch in the AUTO

position.

2. Turn on the high beam by pushing

the lever away from you.

The smart high beam (

) indica-

tor will illuminate.

3. The Smart High Beam will turn on

when vehicle speed is above 28

mph (45km/h).

• If the lever is pushed away when

OHG041114A

OHG045200N

the Smart High Beam is operat-

To flash the headlights, pull the lever

Smart High Beam (if equipped)

ing, the Smart High Beam will

towards you. It will return to the nor-

turn off and the high beam will

The Smart High Beam is a system

mal

(low beam) position when

be on continuously. The smart

that automatically adjusts the head-

released. The headlight switch does

high beam

(

) indicator will

lamp range (switches between high

not need to be on to use the flashing

turn off.

beam and low beam) according to

feature.

• If the lever is pulled towards you

the brightness of other vehicles and

road conditions.

when the Smart High Beam is

operating, the Smart High Beam

WARNING

will turn off. The smart high

Do not use high beam when

beam (

) indicator will turn off.

there are surrounding vehicles.

4. If the light switch is placed to the

Using high beam could obstruct

headlamp position, the Smart

the other driver's vision.

High Beam will turn off and the

low beam will be on continuously.

4 104

Content   ..  8  9  10  11   ..