Hyundai Accent (2019 year). Instruction - part 17
Driving your vehicle
NOTICE
Hill-Start Assist Control (HAC)
WARNING
The Hill-Start Assist Control (HAC)
The VSM does not operate when:
helps prevent the vehicle from rolling
If ESC indicator light
(
) or
•
Driving on a banked road such
backwards when starting a vehicle
EPS warning light (
) stays on
as gradient or incline.
from a stop on a hill. The system
or blinks, your vehicle may have
•
Driving rearward.
operates the brakes automatically for
a malfunction with the VSM sys-
•
ESC OFF indicator light is on.
approximately 2 seconds and releas-
tem. When the warning light illu-
es the brake after 2 seconds or when
•
EPS (Electric Power Steering)
minates, have your vehicle
the accelerator pedal is depressed.
warning light
(
) is on or
checked by an authorized
blinks.
HYUNDAI dealer as soon as
possible.
WARNING
Always be ready to depress the
Driving with wheels and tires with dif-
accelerator pedal when starting
ferent sizes may cause the ESC sys-
off on a incline.The HAC activates
tem to malfunction. Before replacing
only for approximately 2 seconds.
tires, make sure all four tires and
wheels are the same size. Never
drive the vehicle with different sized
NOTICE
tires and wheels installed.
• The HAC does not operate when
the shift lever is in P (Park) or N
(Neutral)
• The HAC activates even though
the ESC
(Electronic Stability
Control) is off but does not acti-
vate when the ESC has malfunc-
tioned.
5-32
Good Braking Practices
To dry the brakes, apply the brakes
Be cautious when parking on a hill.
lightly until the braking action returns
Firmly engage the parking brake and
to normal, taking care to keep the
place the shift lever in P (automatic
WARNING
vehicle under control at all times. If
transmission). If your vehicle is fac-
the braking action does not return to
ing downhill, turn the front wheels
Whenever leaving the vehicle or
normal, stop as soon as it is safe to
into the curb to help keep the vehicle
parking, always come to a com-
do so and call an authorized
from rolling.
plete stop and continue to
HYUNDAI dealer for assistance.
If your vehicle is facing uphill, turn the
depress the brake pedal. Move
DO NOT drive with your foot resting
front wheels away from the curb to
the shift lever into the 1st gear
on the brake pedal. Even light, but
help keep the vehicle from rolling. If
(for manual transmission vehi-
constant pedal pressure can result in
there is no curb or if it is required by
cle) or P
(Park, for automatic
the brakes overheating, brake wear,
other conditions to keep the vehicle
transmission vehicle) position,
and possibly even brake failure.
from rolling, block the wheels. Under
then apply the parking brake,
some conditions your parking brake
and place the ignition switch in
If a tire goes flat while you are driv-
can freeze in the engaged position.
5
the LOCK/OFF position.
ing, apply the brakes gently and
This is most likely to happen when
keep the vehicle pointed straight
Vehicles parked with the park-
there is an accumulation of snow or
ahead while you slow down. When
ing brake not applied or not
ice around or near the rear brakes or
you are moving slowly enough for it
fully engaged may roll inadver-
if the brakes are wet. If there is a risk
to be safe to do so, pull off the road
tently and may cause injury to
that the parking brake may freeze,
and stop in a safe location.
the driver and others. ALWAYS
apply it only temporarily while you put
apply the parking brake before
Keep your foot firmly on the brake
the shift lever in P (automatic trans-
exiting the vehicle.
pedal when the vehicle is stopped to
mission) and block the rear wheels so
prevent the vehicle from rolling for-
the vehicle cannot roll.
ward.
Wet brakes can be dangerous! The
Then release the parking brake. Do
If your vehicle is equipped with an
brakes may get wet if the vehicle is
not hold the vehicle on an incline with
Automatic Transmission, don't let
driven through standing water or if it
the accelerator pedal.
your vehicle creep forward. To avoid
is washed. Your vehicle will not stop
This can cause the transaxle to over-
creeping forward, keep your foot
as quickly if the brakes are wet. Wet
heat. Always use the brake pedal or
firmly on the brake pedal when the
brakes may cause the vehicle to pull
parking brake.
vehicle is stopped.
to one side.
5-33
Driving your vehicle
DRIVE MODE INTEGRATED CONTROL SYSTEM (IF EQUIPPED)
The mode changes, as below, when-
SPORT mode
ever the DRIVE MODE button is
SPORT mode manages
pressed.
the driving dynamics by
automatically adjusting the
NORMAL
SPORT
steering effort, and the
engine and transmission control
logic for enhanced driving perform-
ance.
NORMAL mode
•
When SPORT mode is selected by
In NORMAL mode the engine and
pressing the DRIVE MODE button,
transmission control logic work
the SPORT indicator will illuminate.
OHCA057027
together to provide regular daily driv-
•
Whenever the engine is restarted,
The drive mode may be selected
ing performance with some fuel effi-
the Drive Mode will revert back to
according to the driver's preference
ciency.
NORMAL mode. If SPORT mode is
or road condition.
• When NORMAL mode is selected,
desired, re-select SPORT mode
The system resets to be in the NOR-
it is not displayed on the instrument
from the DRIVE MODE button.
MAL mode, when the engine is
cluster.
•
When SPORT mode is activated:
restarted.
- The engine rpm will tend to
remain raised over a certain
i
Information
length of time even after releas-
ing the accelerator
If there is a problem with the instru-
ment cluster, the drive mode will be in
- Upshifts are delayed when accel-
NORMAL mode and may not change
erating
to SPORT mode.
i
Information
In SPORT mode, the fuel efficiency
may decrease.
5-34
FORWARD COLLISION-AVOIDANCE ASSIST (FCA) SYSTEM - RADAR TYPE
The Forward Collision-Avoidance
System Setting and Activation
WARNING
Assist
(FCA) system is to help
System setting
reduce or to avoid accident risk. It
Take the following precautions
• The driver can activate the FCA by
recognizes the distance from the
when using the Forward
placing the ignition switch to the
vehicle ahead through the sensors
Collision-avoidance
Assist
ON position and by selecting:
(i.e. radar), and, if necessary, warns
(FCA) :
the driver or applies emergency
'User Settings → Driving Assist →
braking.
•
This system is only a supple-
Forward Collision-avoidance Assist
mental system and it is not
(FCA)'
intended to, nor does it replace
❈ Radar type FCA system does not
the need for extreme care and
recognize for pedestrians in front.
The FCA deactivates, when the driv-
attention of the driver. The
er deselects the system setting.
sensing range and objects
WARNING
detectable by the sensors are
limited. Pay attention to the
5
The Forward Collision-avoid-
road conditions at all times.
ance Assist (FCA) system is a
•
NEVER drive too fast in accor-
supplemental system and is not
dance with the road condi-
a substitute for safe driving
tions or while cornering.
practices.
•
Always drive cautiously to
It is the responsibility of the
prevent unexpected and sud-
driver to always check the
den situations from occur-
speed and distance to the vehi-
ring. FCA does not stop the
cle ahead to ensure it is safe to
vehicle completely and is not
use the FCA system.
a collision avoidance system.
5-35
Driving your vehicle
The warning light illumi-
The options for the initial Forward
- Late :
nates on the LCD display,
Collision-avoidance Assist includes
When this condition is selected, the
when you cancel the FCA
the following:
initial Forward Collision-avoidance
system. The driver can
Assist is activated later than normal.
- Early :
monitor the FCA ON/OFF status on
This setting reduces the amount of
the LCD display. Also, the warning
When this condition is selected, the
distance between the vehicle ahead
light illuminates when the ESC
initial Forward Collision-avoidance
before the initial warning occurs.
(Electronic Stability Control) is
Assist is activated earlier. This set-
Select 'Late' when traffic is light and
turned off.
ting maximizes the amount of dis-
when driving speed is slow.
tance between the vehicle ahead
If the warning light remains ON when
before the initial warning occurs.
the FCA is activated, have the sys-
tem checked by an authorized
If the 'Early' condition feels too sen-
Prerequisite for activation
HYUNDAI dealer.
sitive, select 'Normal' condition.
The FCA system is on and ready
Even though, 'Early' is selected if the
when FCA is selected on the LCD
front vehicle suddenly stops the ini-
display and when the following pre-
•
The driver can select the initial warn-
tial warning activation time may not
requisites are satisfied:
ing activation time on the LCD dis-
seem fast.
- The ESC
(Electronic Stability
play.
Control) is on.
Go to the 'User Settings → Driving
Assist → Forward Collision-avoid-
- Normal :
- Driving speed exceeds approxi-
ance Assist → Late/Normal/Early'.
mately 6 mph (10 km/h). (The FCA
When this condition is selected, the
is only activated within a certain
initial Forward Collision-avoidance
speed range.)
Assist is activated normally. This set-
ting allows for a nominal amount of
- When the FCA recognizes a vehi-
distance between the vehicle ahead
cle in front. (The FCA may not rec-
before the initial warning occurs.
ognize every obstacle or provide
warnings and braking in every situ-
ation, so do not rely on the FCA to
stop the vehicle in instances where
the driver sees an obstacle and
has the ability to apply the brakes).
5-36
FCA Warning Message and
Collision Warning (1st warning)
WARNING
System Control
•
Completely stop the vehicle
The FCA produces warning mes-
sages, warning alarms, and emer-
on a safe location before
operating the switch on the
gency braking based on the level of
risk of a frontal collision, such as
steering wheel to activate
/deactivate the FCA system.
when a vehicle ahead suddenly
brakes, when there is no following
•
The FCA automatically acti-
distance from the vehicle in front.
vates upon placing the igni-
tion switch to the ON position.
The driver can deactivate the
FCA by canceling the system
setting on the LCD display.
OHCA057029
5
•
The FCA automatically deacti-
This initial warning message appears
vates upon canceling the ESC
on the LCD display with a warning
(Electronic Stability Control).
chime.
When the ESC is canceled,
the FCA cannot be activated
on the LCD display. In this
case, the FCA warning light
will illuminate, but it does not
indicate a malfunction.
5-37
Driving your vehicle
Collision Warning (2nd warning)
Emergency Braking
Brake operation
(3rd warning)
•
In an urgent situation, the braking
system enters into the ready status
for prompt reaction against the dri-
ver’s depressing the brake pedal.
•
The FCA provides additional brak-
ing power for optimum braking per-
formance, when the driver depress-
es the brake pedal.
•
The braking control is automatical-
ly deactivated when the driver
sharply depresses the accelerator
OHCA057029
pedal, or when the driver abruptly
OHCA057030
operates the steering wheel.
•
The warning message appears on
•
The FCA braking control is auto-
the LCD display with the warning
•
The warning message appears on
alarms.
the LCD display with the warning
matically canceled when risk fac-
tors disappear.
•
The vehicle will reduce its speed to
alarms.
a certain limit.
•
The vehicle will reduce its speed to
a certain limit.
CAUTION
- The brake activates gradually for
vehicles ahead.
- The brake control activates within
The driver should always use
an arranged limit to ease the
- The brake control activates within
extreme caution while operating
an arranged limit to ease the
impact from a collision. Maximum
the vehicle, whether or not there
brake control is activated just
impact from a collision.
is a warning message or alarm
before the collision.
from the FCA system.
5-38
FCA Sensor
NOTICE
WARNING
•
Do not apply a license plate
The FCA braking control cannot
frame or foreign objects such as
completely stop the vehicle nor
a bumper sticker or a bumper
avoid all collisions. The driver is
guard or number plate molding
responsible for driving safely
near the radar sensor. Doing so
and controlling the vehicle.
may adversely affect the sens-
ing performance of the radar.
•
Always keep the radar sensor
WARNING
and cover clean and free of dirt
and debris.
The FCA system logic operates
•
Use only a soft cloth to wash the
OHCA058031
within certain parameters, such
vehicle. Do not spray pressur-
as the distance from the vehi-
5
In order for the FCA system to oper-
ized water directly on the sensor
cle, the speed of the vehicle
ate properly, always make sure the
or sensor cover.
ahead, and the driver's vehicle
sensor cover or sensor is clean and
•
Be careful not to apply unneces-
speed. Certain conditions such
free of dirt, snow, and debris. Dirt,
sary force on the radar sensor or
as inclement weather and road
snow, or foreign substances on the
sensor cover. If the sensor is
conditions may affect the oper-
sensor cover or sensor may adverse-
forcibly moved out of proper
ation of the FCA system.
ly affect the sensing performance of
alignment, the FCA system may
the sensor.
not operate correctly. In this
case, a warning message may
WARNING
not be displayed. Have the vehi-
cle inspected by an authorized
Never deliberately drive danger-
HYUNDAI dealer.
ously to activate the system.
(Continued)
5-39
Driving your vehicle
(Continued)
Warning message and warning
System Malfunction
•
If the front bumper becomes
light
damaged in the area around the
radar sensor, the FCA system
may not operate properly. Have
the vehicle inspected by an
authorized HYUNDAI dealer.
•
Use only genuine HYUNDAI
parts to repair or replace a dam-
aged sensor or sensor cover. Do
not apply paint to the sensor
cover.
•
Playing the vehicle audio sys-
OOS057081L
tem at high volume may make it
OOS057080L
Check Forward Collision Avoidance
difficult to hear the FCA system
Forward Collision Avoidance Assist
Assist system
warning sounds.
(FCA) system disabled.
• When the FCA is not working prop-
Radar blocked
erly, the FCA warning light (
)
When the sensor cover is blocked
will illuminate and the warning
with dirt, snow, or debris, the FCA
message will appear for a few sec-
system operation may stop temporar-
onds. After the message disap-
ily. If this occurs, a warning message
pears, the master warning light
will appear on the LCD display.
(
) will illuminate. In this case,
Remove any dirt, snow, or debris and
have the vehicle inspected by an
clean the radar sensor cover before
authorized HYUNDAI dealer.
operating the FCA system. The sys-
• The FCA warning message may
tem will operate normally when such
appear along with the illumination
foreign substance is removed.
of the ESC
(Electronic Stability
The FCA may not properly operate in
Control) warning light.
an area (e.g. open terrain), where
any substances are not detected
5-40
after turning ON the engine.
WARNING
(Continued)
(Continued)
•
If there is a malfunction with
•
Occupants may get injured, if
•
The FCA is only a supplemen-
the FCA system, the forward
the vehicle abruptly stops by
tal system for the driver’s con-
Collision-avoidance Assist
the activated FCA system. Pay
venience. The driver is
(FCA) is not applied even
extreme caution.
responsible for controlling the
though the braking system is
vehicle operation. Do not
operating normally.
solely depend on the FCA
•
If the vehicle in front stops
system. Rather, maintain a
suddenly, you may have less
safe braking distance, and, if
control of the brake system.
necessary, depress the brake
Therefore, always keep a safe
pedal to reduce the driving
distance between your vehicle
speed.
and the vehicle in front of you.
•
In certain instances and
5
•
The FCA system may activate
under certain driving condi-
during braking and the vehi-
tions, the FCA system may
cle may stop suddenly shift-
activate prematurely. This ini-
ing loose objects toward the
tial warning message appears
passengers. Always keep
on the LCD display with a
loose objects secured.
warning chime.
•
The FCA system may not acti-
Also, in certain instances the
vate if the driver applies the
front radar sensor may not
brake pedal to avoid a colli-
detect the vehicle ahead. The
sion.
FCA system may not activate
•
The brake control may be
and the warning message will
insufficient, possibly causing
not be displayed.
a collision, if a vehicle in front
(Continued)
abruptly stops. Always pay
extreme caution.
(Continued)
5-41
Driving your vehicle
Limitations of the System
Detecting vehicles
WARNING
The FCA system is designed to mon-
The sensor may be limited when:
itor the vehicle ahead on the road-
•
The radar sensor is blocked with a
•
The FCA system operates
way through radar signals to warn
foreign object or debris
only to detect vehicles in front
the driver that a collision is imminent,
of the vehicle.
•
Inclement weather such as heavy
and if necessary, apply emergency
•
The FCA system does not
rain or snow obscures the field of
braking.
operate when the vehicle is in
view of the radar sensor
In certain situations, the radar sen-
reverse.
•
There is interference by electro-
sor may not be able to detect the
•
The FCA system is not
magnetic waves
vehicle ahead. In these cases, the
designed to detect other
•
There is severe irregular reflection
FCA system may not operate nor-
objects on the road.
from the radar sensor
mally. The driver must pay careful
•
The FCA system does not
attention in the following situations
•
The radar sensor recognition is
detect vehicles in the oppo-
where the FCA operation may be
limited
site lane.
limited.
•
The vehicle in front is too small to
•
The FCA system does not
be detected (for example a motor-
detect cross traffic vehicles
cycle or a bicycle, etc.)
that are approaching.
•
The vehicle in front is an oversize
•
The FCA system cannot
vehicle or trailer that is too big to
detect the driver approaching
be detected by the camera recog-
the side view of a parked vehi-
nition system (for example a tractor
cle
(for example on a dead
trailer, etc.)
end street.)
•
The vehicle is driven near areas
In these cases, you must main-
containing metal substances as a
tain a safe braking distance,
construction zone, railroad, etc.
and if necessary, depress the
•
The vehicle in front is driving errat-
brake pedal to reduce the driv-
ically
ing speed in order to maintain a
safe distance.
5-42
•
The vehicle drives through a con-
struction area, on an unpaved
road, or above metal materials,
such as a railway
•
The vehicle drives inside a build-
ing, such as a basement parking
lot
•
The adverse road conditions cause
excessive vehicle vibrations while
driving
•
The vehicle in front is moving verti-
OAE056100
OAE056101
cally to the driving direction
- Driving on a curve
The FCA system may recognize a
•
The vehicle in front is stopped ver-
vehicle in the next lane when driving
tically
The performance of the FCA system
5
on a curved road.
may be limited when driving on a
•
The vehicle in front is driving
curved road.
In this case, the system may unnec-
towards your vehicle or reversing
essarily alarm the driver and apply
In certain instances on a curved
•
The sensor recognition changes
the brake.
road, the FCA system may activate
suddenly when passing over a
prematurely.
Always pay attention to road and
speed bump
driving conditions, while driving. If
Also, in certain instances the front
•
The vehicle is under heavy vibra-
radar sensor recognition system may
necessary, depress the brake pedal
tion
to reduce your driving speed in order
not detect the vehicle traveling on a
•
The vehicle is on roundabouts.
curved road.
to maintain a safe distance.
•
The radar or sensor cover is bro-
Also, when necessary depress the
In these cases, the driver must main-
ken
accelerator pedal to prevent the sys-
tain a safe braking distance, and if
tem from unnecessarily decelerating
•
The vehicle is passing a tunnel, toll
necessary, depress the brake pedal
your vehicle.
gate or partially paved road
to reduce your driving speed in order
to maintain a safe distance.
Check the surrounding traffic condi-
•
The radar or camera sensor recog-
tions before use
nition is under other limited circum-
stances
5-43
Driving your vehicle
OPD056102
OAE056103
OAE056109
- Driving on a slope
- Changing lanes
When driving in stop-and-go traffic,
and a stopped vehicle in front of you
The performance of the FCA decreas-
When a vehicle changes lanes in
merges out of the lane, the FCA sys-
es while driving upward or downward
front of you, the FCA system may not
tem may not immediately detect the
on a slope, not recognizing the vehi-
immediately detect the vehicle, espe-
new vehicle that is now in front of
cle in front in the same lane. It may
cially if the vehicle changes lanes
you. In this case, you must maintain
unnecessarily produce the warning
abruptly. In this case, you must main-
a safe braking distance, and if nec-
message and the warning alarm, or it
tain a safe braking distance, and if
essary, depress the brake pedal to
may not produce the warning mes-
necessary, depress the brake pedal
reduce your driving speed in order to
sage and the warning alarm at all.
to reduce your driving speed in order
maintain a safe distance.
to maintain a safe distance.
When the FCA suddenly recognizes
the vehicle in front while passing
over a slope, you may experience
sharp deceleration.
Always keep your eyes forward while
driving upward or downward on a
slope, and, if necessary, depress the
brake pedal to reduce your driving
speed in order to maintain distance.
5-44
i
Information
(Continued)
In some instances, the FCA system
•
Use extreme caution when the
may be canceled when subjected to
vehicle in front of you has
electromagnetic interference.
cargo that extends rearward
from the cab, or when the
i
Information
vehicle in front of you has
higher ground clearance.
This device complies with Part 15 of
•
The FCA system is designed
the FCC rules.
to help detect and monitor the
Operation is subject to the following
vehicle ahead in the roadway
two conditions:
OPD056040
through radar signals. It is not
1. This device may not cause harmful
designed to detect bicycles,
- Detecting the vehicle in front of you
interference, and
motorcycles, or smaller
If the vehicle in front of you has cargo
2. This device must accept any inter-
wheeled objects such as lug-
5
that extends rearward from the cab,
ference received, including interfer-
gage bags, shopping carts, or
or when the vehicle in front of you
ence that may cause undesired
strollers.
has higher ground clearance, addi-
operation.
•
Never try to test the operation
tional special attention is required.
of the FCA system. Doing so
The FCA system may not be able to
may cause severe injury or
detect the cargo extending from the
WARNING
death.
vehicle. In these instances, you must
•
When you replace or reinstall
maintain a safe braking distance
• Do not use the Forward
Collision-avoidance Assist
the front bumper or radar, we
from the rearmost object, and if nec-
essary, depress the brake pedal to
system when towing a vehicle.
recommend that you take
Application of the FCA system
your vehicle to an authorized
reduce your driving speed in order to
maintain distance.
while towing may adversely
HYUNDAI dealer and have the
affect the safety of your vehi-
system checked.
cle or the towing vehicle.
(Continued)
5-45
Driving your vehicle
CRUISE CONTROL
Cruise Control operation
WARNING
(Continued)
•
Do not use when:
Take the following precautions:
- Driving in heavy traffic or
•
Always set the vehicle speed
when traffic conditions make
under the speed limit.
it difficult to drive at a con-
•
If the Cruise Control is left on,
stant speed
(cruise indicator light in the
- Driving on rainy, icy, or
instrument cluster is illumi-
snow-covered roads
nated) the Cruise Control can
- Driving on hilly or windy
be activated unintentionally.
roads
Keep the Cruise Control sys-
- Driving in windy areas
tem off (cruise indicator light
OHCI057021
OFF) when the Cruise Control
- Driving with limited view
is not in use, to avoid inadver-
(possibly due to bad weather
1. Cruise indicator
tently setting a speed.
such as fog, snow, rain and
2. SET indicator
sandstorm)
•
Use the Cruise Control sys-
tem only when traveling on
The Cruise Control system allows
open highways in good
NOTICE
you to drive at speeds above 20 mph
weather.
(30 km/h) without depressing the
During cruise-speed driving of a
•
Do not use the Cruise Control
accelerator pedal.
manual transmission vehicle, do
when it may be unsafe to keep
not shift into neutral without
the vehicle at a constant
depressing the clutch pedal, since
speed.
the engine will be overrevved. If
(Continued)
this happens, depress the clutch
pedal or press the cruise control
ON / OFF button.
5-46
To set Cruise Control speed
i
Information
•
During normal cruise control opera-
tion, when the SET switch is activat-
ed or reactivated after applying the
brakes, the cruise control will ener-
gize after approximately 3 seconds.
This delay is normal.
•
Before activating the cruise control
function, the system will check to
verify that the brake switch is oper-
ating normally. Depress the brake
OHCM057024
pedal at least once after turning ON
3. Push the toggle switch down
the ignition or starting the engine.
OHCA057023
(SET-), and release it. The SET
5
1. Press the CRUISE button on the
indicator light will illuminate.
steering wheel to turn the system
4. Release the accelerator pedal.
on. The cruise indicator will illumi-
nate.
i
Information
2. Accelerate to the desired speed,
which must be more than 20 mph
On a steep slope, the vehicle may
(30 km/h).
slightly slow down or speed up, while
driving uphill or downhill.
i
Information - Manual trans-
mission
For manual transmission vehicles, you
should depress the brake pedal at
least once to set the cruise control
after starting the engine.
5-47
Driving your vehicle
To increase Cruise Control
• Depress the accelerator pedal.
To decrease Cruise Control
speed
When the vehicle attains the
speed
desired speed, push the toggle
switch down (SET-).
OHCM057025
OHCM057024
• Push the toggle switch up (RES+)
• Push the toggle switch down (SET-)
and hold it, while monitoring the
and hold it.Your vehicle will gradual-
SET speed on the instrument clus-
ly slow down. Release the toggle
ter.
switch at the speed you want to
Release the toggle switch when
maintain.
the desired speed is shown and
• Push the toggle switch down (SET-)
the vehicle will accelerate to that
and release it immediately. The
speed.
cruising speed will decrease
1.0
mph (1.6 km/h) each time the toggle
• Push the toggle switch up (RES+)
switch is operated in this manner.
and release it immediately. The
cruising speed will increase
1.0
• Lightly tap the brake pedal. When
mph (1.6 km/h) each time the tog-
the vehicle attains the desired
gle switch is operated in this man-
speed, push the toggle switch
ner.
down (SET-).
5-48