22
window motor down control circuit. Refer to
Circuit Testing and Wiring Repairs in Wiring
Systems.
Did you find and correct the condition?
Go to Step 33
Go to Step 25
23
Inspect for poor connections at the body control
module (BCM). Refer to Testing for Intermittent
Conditions and Poor Connections and Connector
Repairs in Wiring Systems.
Did you find and correct the condition?
Go to Step 33
Go to Step 29
24
Inspect for poor connections at the driver door
module. Refer to Testing for Intermittent
Conditions and Poor Connections and Connector
Repairs in Wiring Systems.
Did you find and correct the condition?
Go to Step 33
Go to Step 30
25
Inspect for poor connections at the passenger rear
power window switch. Refer to Testing for
Intermittent Conditions and Poor Connections
and Connector Repairs in Wiring Systems.
Did you find and correct the condition?
Go to Step 33
Go to Step 31
26
Inspect for poor connections at the passenger rear
power window motor. Refer to Testing for
Intermittent Conditions and Poor Connections
and Connector Repairs in Wiring Systems.
Did you find and correct the condition?
Go to Step 33
Go to Step 32
27
Repair the open or short to ground in the battery
positive voltage circuit. Refer to Circuit Testing
and Wiring Repairs in Wiring Systems.
Did you complete the repair?
Go to Step 33
-
28
Repair the open in the rear power window switch
ground circuit. Refer to Circuit Testing and
Wiring Repairs in Wiring Systems.
Did you complete the repair?
Go to Step 33
-
29
Replace the BCM. Refer to Body Control Module
Replacement in Body Control System.Did you
complete the repair?
IMPORTANT:
Perform the set up procedure for the BCM. Refer
to Body Control Module (BCM)
Programming/RPO Configuration in Body Control
System.
Go to Step 33
-
30
IMPORTANT:
Perform the set up procedure for the driver door
module. Refer to Service Programming System
(SPS) in Programming.
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Doors - Hummer H2