|
|
Content .. 2720 2721 2722 2723 ..
z Debris embedded in the links z Worn teeth surfaces 3. Replace the chain if any of the above conditions are found. 4. Inspect the driven sprocket (3) and the drive sprocket (2) for the following conditions: z Chipped teeth z Excessively worn gear surfaces Slight wear marks are normal. z Debris embedded in the root of the teeth 5. Inspect the drive sprocket (2) for the following conditions: z Lockup shift engagement teeth for chipping z Lockup shift engagement teeth for excessive wear 6. Inspect the drive sprocket bushing for the following conditions: z Excessive wear z Scoring 7. Replace the sprockets if any of the above conditions are found. The chain and sprockets may be replaced separately. Mainshaft 1. Clean the mainshaft in cleaning solvent. 2. Clean the mainshaft oil galleries (1) and air dry.
2004 Hummer H2 2004 DRIVELINE/AXLE Transfer Case - Overhaul - BW 4482-NR4
|