|
|
Content .. 2685 2686 2687 2688 ..
3. Inspect the bearing journals on the mainshaft for the following conditions: z The front support bearing (2) z The drive gear bushing (4) z The front sun gear (5) z The rear support bushing (6) Scoring Pitting Brinelling Excessive wear 4. Inspect the mainshaft range collar splines (3) for damage or excessive wear. Witness marks at the location of the gear is normal. 5. Replace the mainshaft if any of the above conditions are found. Front Output Shaft
2004 Hummer H2 2004 DRIVELINE/AXLE Transfer Case - BW 4484 - Hummer H2
|