|
|
Content .. 2483 2484 2485 2486 ..
Inline 20-Way Connector End View . Does the resistance measure within the Go to Step 5 Go to Step 4 4 Does the resistance measure greater than the 7 ohm Go to Step 9 Go to Step 10 5 Measure the resistance from terminal C of the J 250 K ohm Go to Step 6 Go to Step 11 6 1. Disconnect the J 44152 from the transmission side of the AT inline 20- 2. Reconnect the transmission AT inline 20- way connector. 3. Disconnect the PCM connector C2. 4. Measure the resistance between PCM connector terminal C2-6 and terminal Does the resistance measure within the 3-7 ohm Go to Step 8 Go to Step 7 7 Does the resistance measure greater than the 7 ohm Go to Step 12 Go to Step 13 8 Using the DMM and the J 35616 , measure the 250 K ohm Go to Step 17 Go to Step 14 9 Test the high control circuit and the low control - Go to Step 16 Go to Step 15 10 Test the high control circuit and the low control - Go to Step 16 Go to Step 15 Test the high control circuit and the low control
2004 Hummer H2 2004 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E Diagnosis (DTC P0218 To DTC P2771) - Hummer H2
|