Honda Civic Hatchback (2024 year). Manual in english - page 3

107

uu

Indicators

u

Continued

In

strum

e

nt Pa

nel

Indicator

Name

On/Blinking

Explanation

System Message 
Indicator

•

Comes on along with a beep when a 
problem is detected. A system message on 
the driver information interface appears at 
the same time.

●

Refer to the Indicators information in this chapter 
when a system message appears on the driver 
information interface. Take the appropriate action 
for the message.

●

While the indicator is on, press the 

 (home) 

button, and select 

Warnings

 to see the message 

again.

2

Switching the Display

 P. 125

●

The driver information interface will not return to 
the normal screen unless the warning is canceled, 
or the 

 (home) button is pressed.

●

While the indicator is on, roll the right selector 
wheel to see the message again.

2

Switching the Display

 P. 155

●

The driver information interface will not return to 
the normal screen unless the warning is canceled, 
or the right selector wheel is rolled.

Models with A-type meter

Models with B-type meter

108

uu

Indicators

u

In

strum

e

nt Pa

nel

*1:Models without drive mode switch
*2:Models with drive mode switch

Indicator

Name

On/Blinking

Explanation

ECON

 Mode 

Indicator

*

●

Comes on when the ECON mode is on.

●

Comes on when you set the drive mode 
to 

ECON

.

2

ECON Button

*

 P. 501

2

Drive Mode System

*

 P. 513, 516

NORMAL

 Mode 

Indicator

*

●

Comes on when you set the drive mode 
to 

NORMAL

.

2

Drive Mode System

*

 P. 513, 516

SPORT

 Mode 

Indicator

*

●

Comes on when you set the drive mode 
to 

SPORT

.

●

The ambient meter remains light up in red as long 
as 

SPORT

 mode is selected.

●

The ambient meter

*

 goes off and gauges in the 

instrument panel light up in red as long as 

SPORT

 

mode is selected.

2

Drive Mode System

*

 P. 513, 516

INDIVIDUAL

 

Mode Indicator

*

●

Comes on when you set the drive mode 
to 

INDIVIDUAL

.

2

Drive Mode System

*

 P. 516

COMFORT

 Mode 

Indicator

*

●

Comes on when you set the drive mode 
to 

COMFORT

.

2

Drive Mode System

*

 P. 516

*1

*2

Models without drive mode switch

Models with drive mode switch

Models with A-type meter

Models with B-type meter

* Not available on all models

109

uu

Indicators

u

Continued

In

strum

e

nt Pa

nel

Indicator

Name

On/Blinking

Explanation

+R

 Mode 

Indicator

*

●

Comes on when you set the drive mode to 

+R

.

2

Drive Mode System

*

 P. 516

Low Temperature 
Indicator

*

●

Comes on when the engine coolant 
temperature is low.

●

If the indicator stays on after the engine has 
reached normal operating temperature, there may 
be a problem with the temperature sensors. Have 
your vehicle inspected by a dealer.

* Not available on all models

110

uu

Indicators

u

In

strum

e

nt Pa

nel

Indicator

Name

On/Blinking

Explanation

Immobilizer System 
Indicator

•

Blinks if the immobilizer system cannot 
recognize the key information.

•

Blinks

 - You cannot start the engine. Set the 

power mode to VEHICLE OFF, then select the ON 
mode again.

Depress and hold the brake pedal before setting 
the power mode to ON.

•

Repeatedly blinks 

- The system may be 

malfunctioning. Have your vehicle checked by a 
dealer.

•

Do not attempt to alter this system or add other 
devices to it. Electrical problems can occur.

Security System 
Alarm Indicator

•

Blinks when the security system alarm has 
been set.

2

Security System Alarm

 P. 195

Models with 
A-type meter

Indicator

Indicator

Models with 
B-type meter

Canadian models

Models with 
A-type meter

Indicator

Indicator

Models with 
B-type meter

111

uu

Indicators

u

Continued

In

strum

e

nt Pa

nel

Indicator

Name

On/Blinking

Explanation

Auto Idle Stop 

OFF

 

Indicator

*

●

Comes on when the Auto Idle Stop system 
has been turned off by the Auto Idle Stop 

OFF

 button.

2

Auto Idle Stop System ON/OFF

 P. 503, 509

Auto Idle Stop 
System Indicator 
(Amber)

*

●

Blinks if there is a problem with the Auto 
Idle Stop system.

●

Blinks 

- Have your vehicle checked by a dealer.

Auto Idle Stop 
Indicator (Green)

*

●

Comes on when Auto Idle Stop is in 
operation. The engine automatically shuts 
off.

2

Auto Idle Stop

 P. 502, 508

* Not available on all models

112

uu

Indicators

u

In

strum

e

nt Pa

nel

Indicator

Name

On/Blinking

Explanation

Auto Idle Stop 
Suspend Indicator

*

●

Comes on while Auto Idle Stop is 
temporarily suspended in the following 
situations.

—

-

Brake pedal is not fully pressed

●

Depress the brake pedal firmly.

-

The transmission is in a position other than 

(

D

2

Auto Idle Stop

 P. 502, 508

-

System charging is prioritized

-

Climate control system is prioritized

-

Engine coolant temperature is not in 
operating range

-

SPORT

 mode

*

 is selected.

2

Auto Idle Stop

 P. 502, 508

2

Drive Mode System

*

 P. 513, 516

-

The battery temperature is too low.

-

Auto Idle Stop does not activate for some 
reason.

2

Auto Idle Stop

 P. 502, 508

—

●

If you press and hold the Auto Idle Stop 

OFF

 

button, you can select whether to display the status 
messages or not.

Continuously variable transmission models

Continuously variable transmission models

* Not available on all models

113

uu

Indicators

u

Continued

In

strum

e

nt Pa

nel

Indicator

Name

On/Blinking

Explanation

Cruise Mode 
Indicator 
(White/Green)

●

Lights up in white when you change to 
cruise mode.

●

Lights up in green when you have set a 
speed for cruise control.

2

To Switch ACC with Low Speed Follow to 
Cruise Control

 P. 593

2

To Switch ACC to Cruise Control

 P. 613

Adaptive Cruise 
Control (ACC) with 
Low Speed Follow

*

 

Interval Indicator

*

●

Comes on when Adaptive Cruise Control 
(ACC) with Low Speed Follow

*

 indicator 

comes on.

●

Each time you press the interval button, the following 
interval (the interval behind a vehicle detected ahead 
of you) setting cycles through 

Furthest

, 

Far

, 

Mid

, and 

Nearest

 following intervals.

2

To Set or Change Following-interval

 P. 589

Adaptive Cruise 
Control (ACC) with 
Low Speed Follow

*

 

Indicator (Amber)

●

Comes on if there is a problem with ACC 
with Low Speed Follow

*

.

●

Comes on while driving 

- Have your vehicle 

checked by a dealer.

●

Comes on if the ACC with Low Speed Follow

*

 

is deactivated temporarily after the battery 
has been disconnected, then re-connected.

●

Drive a short distance at more than 12 mph (20 km/h). 
The indicator should go off. If it does not, have your 
vehicle checked by a dealer.

●

Indicator may come on temporarily when 
the Maximum Load Limit is exceeded.

●

ACC with Low Speed Follow

*

 has been 

automatically canceled.

●

Make sure the total load is within the Maximum 
Load Limit.

2

Maximum Load Limit

 P. 477

●

Stays on constantly 

- Have your vehicle checked 

by a dealer.

Adaptive Cruise 
Control (ACC) with 
Low Speed Follow

*

 

Indicator 
(White/Green)

●

Lights up in white when you press the 

 

button.

●

Lights up in green when you press the 

RES/

+

/

SET/-

 switch up or down.

2

Adaptive Cruise Control (ACC) with Low 
Speed Follow

*

 P. 574

2

Adaptive Cruise Control (ACC)

*

 P. 595

* Not available on all models

114

uu

Indicators

u

In

strum

e

nt Pa

nel

Indicator

Name

On/Blinking

Explanation

Lane Keeping 
Assist System 
(LKAS) Indicator 
(Amber)

●

Comes on if there is a problem with the 
LKAS.

●

Stays on constantly 

- Have your vehicle checked 

by a dealer.

●

Indicator may come on temporarily when 
the Maximum Load Limit is exceeded.

●

Make sure the total load is within the Maximum 
Load Limit.

2

Maximum Load Limit

 P. 477

●

Stays on constantly

 - Have your vehicle checked 

by a dealer.

Lane Keeping 
Assist System 
(LKAS) Indicator 
(White/Green)

●

Lights up in white when you press the LKAS 
button.

●

Lights up in green when the LKAS is in 
operation.

2

Lane Keeping Assist System (LKAS)

 P. 615

115

uu

Indicators

u

Continued

In

strum

e

nt Pa

nel

Indicator

Name

On/Blinking

Explanation

Safety Support 
Indicator (Amber)

●

Comes on if there is a problem with Road 
Departure Mitigation system, CMBS

TM

, Low 

Speed Braking Control

*

 or blind spot 

information system

*

.

●

Stays on constantly

 - Have your vehicle checked 

by a dealer.

●

Indicator may come on temporarily when 
the Maximum Load Limit is exceeded.

●

Make sure the total load is within the Maximum 
Load Limit.

2

Maximum Load Limit

 P. 477

●

Stays on constantly

 - Have your vehicle checked 

by a dealer.

●

Comes on if the Road Departure Mitigation 
system, CMBS

TM

 and Low Speed Braking 

Control

*

 are deactivated temporarily after 

the battery has been disconnected and 
then re-connected.

●

Drive a short distance at more than 12 mph (20 
km/h). The indicator should go off. If it does not, 
have your vehicle checked by a dealer.

* Not available on all models

116

uu

Indicators

u

In

strum

e

nt Pa

nel

Indicator

Name

On/Blinking

Explanation

Safety Support 
Indicator (Amber)

●

Comes on when the Road Departure 
Mitigation system and/or CMBS

TM

 shuts 

itself off.

●

Stays on

 - The temperature inside the camera is 

too high.
Use the climate control system to cool down the 
camera.
The system activates when the temperature inside 
the camera cools down.

2

Front Wide View Camera

 P. 642

●

Stays on

 - The area around the camera is blocked 

by dirt, mud, etc. Stop your vehicle in a safe place 
and wipe the debris off with a soft cloth.

●

Have your vehicle checked by a dealer if the 
indicator and message are still displayed even after 
you have cleaned the area around the camera.

2

Front Wide View Camera

 P. 642

●

It may come on when the ambient conditions are 
dark, such as when driving in a tunnel, or at night, 
dawn, or dusk.

117

uu

Indicators

u

In

strum

e

nt Pa

nel

Indicator

Name

On/Blinking

Explanation

Safety Support 
Indicator (Amber)

●

Comes on when mud, snow, or ice 
accumulates in the vicinity of the sonar 
sensor.

●

Remove the obstacle in the vicinity of the sonar 
sensor.

2

Low Speed Braking Control

*

 P. 555, 561

●

Comes on when mud, snow, or ice 
accumulates in the vicinity of the blind spot 
information system sensor.

●

Comes on when the temperature of the 
blind spot information system sensor is 
high.

●

Comes on while driving

 - Something may be 

interfering with the blind spot information system 
sensor. Check the vicinity of the blind spot 
information system sensor and remove any 
obstacles.

●

The system will return to normal when the 
temperature cools down.

2

Blind Spot Information System

*

 P. 535

Safety Support 
Indicator (Green/
Gray)

●

Lights up in green when Road Departure 
Mitigation system, CMBS

TM

, Low Speed 

Braking Control

*

 and blind spot 

information system

*

 are on.

●

Lights up in green and gray when Road 
Departure Mitigation system, CMBS

TM

, Low 

Speed Braking Control

*

, blind spot 

information system

*

 or any two or three of 

these systems are off.

●

Lights up in gray when Road Departure 
Mitigation system, CMBS

TM

, Low Speed 

Braking Control

*

 and blind spot 

information system

*

 are off.

2

Road Departure Mitigation system On and Off

 

P. 569

2

Blind Spot Information System On and Off

 

P. 537

2

System On and Off

 P. 558, 563

2

CMBS

TM

 On and Off

 P. 547

Models with Low Speed Braking Control

Models with blind spot information system

* Not available on all models

118

In

strum

e

nt Pa

nel

Gauges and Driver Information Interface

Gauges

Gauges include the speedometer, fuel gauge, and other related indicators.
They are displayed when the power mode is in ON.

Displays your driving speed in mph or km/h.

■

Speedometer

1

Speedometer

You can set the speedometer and the displayed 
measurements to read in either km/h or mph.

2

Speed/Distance Units

 P. 137, 169

2

Settings

 P. 138

2

Customized Features

 P. 387

If you change the unit from miles and mph to km and 
km/h, the current vehicle speed in mph appears next 
to the digital speedometer.

If you change the unit from miles and mph to km and 
km/h while the gauge design is set to 

Round

 or 

Bar

, 

the current vehicle speed in mph appears next to the 
digital speedometer.

U.S. models
Models with Auto Idle Stop and B-type meter

U.S. models without Auto Idle Stop

Vehicle Speed in mph

Continued

119

uu

Gauges and Driver Information Interface

u

Gauges

In

strum

e

nt Pa

nel

Shows the number of engine revolutions per minute.

Displays the amount of fuel left in the fuel tank.

Displays the temperature of the engine coolant.

■

Tachometer

■

Fuel Gauge

■

Temperature Gauge

1

Tachometer

The tachometer can be turned on and off using the 
driver information interface.

2

Settings

 P. 138

Even if you have turned off the tachometer on the 
driver information interface, if 

No content

 is selected 

on the driver information interface, it will change to a 
tachometer-only display.

The shift up alarm sounds when the tachometer 
reading approaches the red zone.
You can turn the shift up alarm feature on and off.

2

Customized Features

 P. 387

Models with A-type meter

Models without Auto Idle Stop

1

Fuel Gauge

NOTICE

You should refuel when the reading approaches 

.

Running out of fuel can cause the engine to misfire, 
damaging the catalytic converter.

The actual amount of remaining fuel may differ from 
the fuel gauge reading.

E

Models with B-type meter

1

Temperature Gauge

NOTICE

Driving with the temperature gauge pointer in the 
upper zone can cause serious engine damage. Pull 
safely to the side of the road and allow engine 
temperature to return to normal.

2

Overheating

 P. 781

uu

Gauges and Driver Information Interface

u

Gauges

120

In

strum

e

nt Pa

nel

Shows the total number of miles or kilometers that your vehicle has accumulated.

Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada).

■

Adjusting the outside temperature display

Adjust the temperature reading by up to ±5°F or ±3°C if the temperature reading 
seems incorrect.

■

Odometer

■

Outside Temperature

Models with Auto Idle Stop

1

Outside Temperature

The temperature sensor is in the front bumper.
Road heat and exhaust from another vehicle can 
affect the temperature reading when your vehicle 
speed is less than 19 mph (30 km/h).

It may take several minutes for the display to be 
updated after the temperature reading has stabilized.

1

Adjusting the outside temperature display

You can adjust the temperature reading.

2

Settings

 P. 138

2

Customized Features

 P. 387

121

uu

Gauges and Driver Information Interface

u

Gauges

Continued

In

strum

e

nt Pa

nel

Shows certain detected traffic signs while driving.

The indicator blinks when the maximum speed of the traffic sign detected by the 
Traffic Sign Recognition System is exceeded.

2

Traffic Sign Recognition System

 P. 636

■

Traffic Sign Recognition System

Models with A-type meter

Models with B-type meter

uu

Gauges and Driver Information Interface

u

Gauges

122

In

strum

e

nt Pa

nel

Shows the current mode for ACC with Low Speed Follow

*

, LKAS, and Traffic Jam 

Assist

*

.

2

Adaptive Cruise Control (ACC) with Low Speed Follow

*

 P. 574

2

Adaptive Cruise Control (ACC)

*

 P. 595

2

Lane Keeping Assist System (LKAS)

 P. 615

2

Traffic Jam Assist

*

 P. 627

■

Current Mode for ACC with Low Speed Follow

*

, the LKAS, and Traffic Jam Assist

*

1

Current Mode for ACC with Low Speed Follow

*

, the LKAS, and 

Traffic Jam Assist

*

When you set speed for ACC with Low Speed Follow

*

 

or cruise control, a set speed mark will be displayed 
on the speedometer.

If the gauge design is set to 

Round

 or 

Bar

, when you 

set speed for ACC or cruise control, a set speed mark 
will be displayed on the speedometer.

Models with Auto Idle Stop and B-type meter

Models without Auto Idle Stop

Set 
Speed

* Not available on all models

Continued

123

uu

Gauges and Driver Information Interface

u

Gauges

In

strum

e

nt Pa

nel

Shows the clock.

Light up from outside to center according to engine speed.

■

Clock

■

Rev Indicators

*

Models with A-type meter

1

Clock

You can adjust the time manually and change the 
clock display to show the 12 hour clock or 24 hour 
clock.

2

Clock

 P. 174

1

Rev Indicators

*

You can turn the rev indicators on and off.

2

Customized Features

 P. 387

* Not available on all models

uu

Gauges and Driver Information Interface

u

Gauges

124

In

strum

e

nt Pa

nel

When using the 

+R

 gauge, the following vehicle information can be displayed.

2

Honda LogR

*

 P. 404

•

Water Temp.

•

Oil Temp.

•

Oil Pressure

•

Ext. Air Temp.

•

Intake Air Temp.

•

Boost Pressure

•

Steering Angle

•

Accel. Ped. Pos.

•

Brake Pressure

•

Clutch Ped. Pos.

•

Yaw Rate

•

Atmos. Pressure

■

Vehicle Information

Models without Auto Idle Stop

1

Vehicle Information

Up to 6 items can be selected and displayed at once.

2

Honda LogR

*

 P. 404

You can set a limit for 

Water Temp.

 and 

Oil Temp.

. 

When the limit is reached, the display will turn 
amber.

2

Honda LogR

*

 P. 404

When the ACC or LKAS are turned on, vehicle 
information is not displayed.

* Not available on all models

125

uu

Gauges and Driver Information Interface

u

Driver Information Interface (A-type Meter)

Continued

In

strum

e

nt Pa

nel

Driver Information Interface (A-type Meter)

The driver information interface shows information such as the estimated travelable 
distance and fuel economy of the vehicle. It also displays messages such as warnings 
and other helpful information.
When a warning message displays, please check the message and contact a dealer 
to have the vehicle inspected if necessary. Please refer to the pages below if the 

Engine oil pressure low

 or 

Engine temperature too hot

 message is displayed.

2

If the Engine oil pressure low Warning Appears

 P. 785

2

Overheating

 P. 781

Press the 

 (home) button, then roll the left selector wheel to scroll to the content 

you want to see. Press the left selector wheel to see detailed information.

■

Switching the Display

1

Switching the Display

You can add or delete the meter contents.

2

Customize Display

 P. 136

126

uu

Gauges and Driver Information Interface

u

Driver Information Interface (A-type Meter)

In

strum

e

nt Pa

nel

Customize 
display

 P. 136

Left Selector 
Wheel

 (home) Button

Roll the left 
selector wheel.

No content

 P. 137

Speed & time

 P. 129

Warnings 

 P. 137

Range & fuel

 P. 127

Settings

 P. 138

Driver 
attention

 P. 131

Seat belts

 P. 134

Safety 
Support

 P. 134

Maintenance

 P. 134

127

uu

Gauges and Driver Information Interface

u

Driver Information Interface (A-type Meter)

Continued

In

strum

e

nt Pa

nel

Roll the left selector wheel to switch between trip meter A and trip meter B.

■

Range / Fuel / Trip Meter

Average Fuel Economy

Range

Trip Meter B

Instant Fuel Economy

Trip Meter A

uu

Gauges and Driver Information Interface

u

Driver Information Interface (A-type Meter)

128

In

strum

e

nt Pa

nel

■

Trip meter

Shows the total number of miles or kilometers driven since the last reset. Meters A 
and B can be used to measure two separate trips.

Resetting a trip meter

To reset the trip meter, display it, press the left selector wheel, and then select 

Reset

. 

u

The trip meter is reset to 0.0.

■

Range

Shows the estimated distance you can travel on the remaining fuel. This estimated 
distance is based on the vehicle's current fuel economy.

■

Average fuel economy

Shows the estimated average fuel economy of each trip meter in mpg or l/100 km. 
The display is updated at set intervals. When a trip meter is reset, the average fuel 
economy is also reset.

■

Instant fuel economy

Shows the instant fuel economy as a bar graph in mpg or l/100 km.

1

Range

The driving range displayed is only an estimate and 
may differ from the actual distance the vehicle can 
travel.

1

Average fuel economy

You can change when to reset the average fuel 
economy.

2

Settings

 P. 138

129

uu

Gauges and Driver Information Interface

u

Driver Information Interface (A-type Meter)

Continued

In

strum

e

nt Pa

nel

Roll the left selector wheel to switch between trip meter A and trip meter B.

■

Speed/Time/Trip Meter

Trip Meter B

Average Speed

Trip Meter A

Elapsed Time

uu

Gauges and Driver Information Interface

u

Driver Information Interface (A-type Meter)

130

In

strum

e

nt Pa

nel

■

Trip meter

2

Trip meter

 P. 128

■

Average speed

Shows the average speed in mph or km/h since Trip A or Trip B was reset.

■

Elapsed time

Shows the time elapsed since Trip A or Trip B was reset.

1

Average speed

You can change when to reset the average speed.

2

Settings

 P. 138

1

Elapsed time

You can change when to reset the elapsed time.

2

Settings

 P. 138

Continued

131

uu

Gauges and Driver Information Interface

u

Driver Information Interface (A-type Meter)

In

strum

e

nt Pa

nel

The Driver Attention Monitor analyzes steering inputs to determine if the vehicle is 
being driven in a manner consistent with drowsy or inattentive driving. If it 
determines that the vehicle is being driven in such a manner, it will display the 
degree of the driver's attention on the driver information interface.

When you select 

Driver attention

 on the 

driver information interface, bars on it light up 
in white to indicate the degree of the driver's 
attention.

2

Switching the Display

 P. 125

■

Driver Attention Monitor

1

Driver Attention Monitor

The Driver Attention Monitor cannot always detect if 
the driver is tired or inattentive.
Regardless of the system's feedback, if you are 
feeling tired, stop in a safe location and rest for as 
long as needed.

Driver Information 
Interface

Left Selector 
Wheel

 (home) Button

Level

132

uu

Gauges and Driver Information Interface

u

Driver Information Interface (A-type Meter)

In

strum

e

nt Pa

nel

If two bars light up, the 

Driver attention 

level low

 message will appear.

If one bar lights up, the 

Driver attention 

level low. Time for a break.

 message will 

appear, a beep will sound, and the steering 
wheel will vibrate.
If this message appears, stop in a safe location 
and rest for as long as needed.
The message will disappear when the left 
selector wheel is pressed or when the system 
has determined that the driver is driving 
normally.
If the driver does not take a break and the 
monitor continues to detect that the driver is 
very tired, the message will appear again after 
approximately 15 minutes, accompanied by a 
beep and steering wheel vibrations.
The message does not appear when the 
traveling time is 30 minutes or less.

Continued

133

uu

Gauges and Driver Information Interface

u

Driver Information Interface (A-type Meter)

In

strum

e

nt Pa

nel

■

The Driver Attention Monitor resets when:

•

The engine is turned off.

•

The driver unfastens the seat belt and opens the door while the vehicle is stopped.

■

For the Driver Attention Monitor to function:

•

The vehicle must be traveling above 25 mph (40 km/h).

•

The electric power steering (EPS) system indicator must be off.

■

Depending on driving conditions or other factors, the Driver Attention 
Monitor may not function in the following circumstances:

•

The steering assist function of the Lane Keeping Assist System (LKAS) is active.

2

Lane Keeping Assist System (LKAS)

 P. 615

•

The condition of the road is poor; e.g., the surface is unpaved or bumpy.

•

It is windy.

•

The driver is frequently operating the vehicle in an assertive manner, such as 
changing lanes or accelerating.

■

Customizing

You can change the Driver Attention Monitor settings. Select 

Tactile and audible 

alert

, 

Tactile alert

 or 

OFF.

2

Settings

 P. 138

1

For the Driver Attention Monitor to function:

The bars on the driver information interface remain 
grayed-out unless the Driver Attention Monitor is 
functioning.

uu

Gauges and Driver Information Interface

u

Driver Information Interface (A-type Meter)

134

In

strum

e

nt Pa

nel

Occurs, under specified conditions, when seat belts are latched or unlatched. 

2

Seat Belt Reminder

 P. 50

Shows the remaining oil life and Maintenance Minder

TM

.

2

Maintenance Minder

TM

 P. 686

Indicates the status of the Road Departure Mitigation system, CMBS

TM

, and blind 

spot information system

*

 such as On, Off, or Failure, by color and letters.

The following colors indicate the status of any of the above-mentioned systems:

•

Green: The system is on.

•

Gray: The system is off.

•

Amber: There is a problem with the system.

■

Seat Belts

■

Maintenance

■

Safety Support

1

Safety Support

If a system is indicated by the color amber, have your 
vehicle checked by a dealer immediately.

To turn each system on or off, first rotate the left 
selector wheel to switch displays. From the next 
display, you can select which system to turn on or off. 

2

Road Departure Mitigation system On and 
Off

 P. 569

2

Blind Spot Information System On and Off

 

P. 537

2

CMBS

TM

 On and Off

 P. 547

You can also confirm the status of each function by 
the color of the safety support indicator.

2

Safety Support Indicator (Amber)

 P. 115

2

Safety Support Indicator (Green/Gray)

 

P. 117

* Not available on all models

135

uu

Gauges and Driver Information Interface

u

Driver Information Interface (A-type Meter)

Continued

In

strum

e

nt Pa

nel

Area Info for 
CMBS

TM

Area Info for 
Road 
Departure 
Mitigation 
System

Area Info for 
Blind Spot 
Information 
System

*

Road 
Departure 
Mitigation 
System Icon 
and Status 
Info

Blind Spot 
Information 
System Icon 
and Status 
Info

*

CMBS

TM

 Icon 

and Status 
Info

* Not available on all models

uu

Gauges and Driver Information Interface

u

Driver Information Interface (A-type Meter)

136

In

strum

e

nt Pa

nel

You can choose which icons to display on the home screen.

1.

Roll the left selector wheel to scroll to select 

Customize display

, then press the left 

selector wheel.

2.

Roll the left selector wheel.

3.

Roll the left selector wheel to scroll 
between icons, then press the left selector 
wheel to check or uncheck them.

■

Customize Display

1

Customize Display

Icons that are gray cannot be removed from the 
home screen.

When you customize settings, shift to 

(

P

.

When you customize settings, set the parking brake.

Continuously variable transmission models

Manual transmission models

Continued

137

uu

Gauges and Driver Information Interface

u

Driver Information Interface (A-type Meter)

In

strum

e

nt Pa

nel

Enables you to show another unit on the 
driver information interface and set the 
displayed measurements to read in either 
miles and mph or km and km/h.

Press and hold the left selector wheel when 
you select 

No content

 on the driver 

information interface. Each time you do this, 
the unit will change from miles and mph to 
km and km/h or vice versa. After this, a 
confirmation screen will appear for a few 
seconds.

You can check if there are any active warning messages.

■

Speed/Distance Units

■

Warnings

1

Warnings

If there are multiple warnings, you can roll the left 
selector wheel to see other warnings.

uu

Gauges and Driver Information Interface

u

Driver Information Interface (A-type Meter)

138

In

strum

e

nt Pa

nel

Use the driver information interface to customize certain features.

■

How to customize

Press the 

 (home) button, then select the 

Settings

 screen by rolling the left 

selector wheel while the power mode is in ON, the vehicle is at a complete stop, and 
the shift position is in 

(

P

 (continuously variable transmission) or the parking brake is 

set (manual transmission). Then, press the left selector wheel.

■

Settings

1

Settings

To customize other features, roll the left selector 
wheel.

2

List of customizable options

 P. 139

2

Example of customization settings

 P. 145

When you customize settings, shift to 

(

P

.

When you customize settings, set the parking brake.

Continuously variable transmission models

Manual transmission models

Driver 
Information 
Interface

Left Selector Wheel

 (home) Button