Honda e (2021 year). Manual in english - page 26

uu

When Driving

u

Single Pedal Control

402

Driving

After turning on the system, you can choose from three decelerations stages.
You can change the deceleration rate by pulling on a paddle selector.
Each time you pull the paddle selector, the deceleration rate will change by one 
stage.

u

The stage will not change if you pull and hold the paddle selector.

■

Adjusting the Deceleration Rate

1

Adjusting the Deceleration Rate

The stage may not change if the right and left paddle 
selectors are pulled at the same time.
In the following conditions, the stage will not change 
and the indicator will blink even if you pull the paddle 
selector.
In addition, the stage may automatically decrease.

•

The vehicle accelerates/decelerates repeatedly.

•

The vehicle is on a long downward slope.

•

The vehicle has been driving for a long time with a 
heavy load. 

3

WARNING

Be careful when adjusting the deceleration 
rate.

Depending on the deceleration rate, the 
tyres may skid on slippery surfaces.

403

uu

When Driving

u

Single Pedal Control

Driving

a

Decrease

b

Deceleration Stage

c

Increase

d

Paddle Selector

e

Increase the deceleration stage when pulling the 

(

-

 paddle selector (left side)

f

Decrease the deceleration stage when pulling the 

(

+

 paddle selector (right side)

g

Shows Possible one to three of Stages

h

Currently Set Stage

404

uu

When Driving

u

Acoustic Vehicle Alerting System

Driving

Acoustic Vehicle Alerting System

Alerts pedestrians when a vehicle is propelled solely by electricity, approaching at 
speeds around 25 km/h (16 mph) or less.

405

uu

When Driving

u

Adjustable Speed Limiter

Continued

Driving

Adjustable Speed Limiter

This system enables you to set a maximum speed that cannot be exceeded even if 
you are depressing the accelerator pedal.
The vehicle speed limit can be set from about 30 km/h (18 mph) to 250 km/h 
(156 mph).

1

Adjustable Speed Limiter

The adjustable speed limiter may not hold the set 
speed limit when driving downhill. If this occurs, slow 
down by depressing the brake pedal.

When not using the adjustable speed limiter:
Turn off the adjustable speed limiter by pressing the 

 button.

You cannot use the adjustable speed limiter and the 
Adaptive Cruise Control (ACC) with Low Speed 
Follow/Intelligent Speed Limiter at the same time.

3

WARNING

Adjustable Speed Limiter has limitations.
It is always your responsibility to adjust the 
vehicle speed to obey the actual speed 
limit, and safely operate the vehicle.

3

WARNING

Do not depress the accelerator pedal more 
than necessary.
Maintain an appropriate accelerator pedal 
position depending on the vehicle speed.

a

Press the 

 button on the steering wheel.

b

If a different indicator comes on, press the 

LIM

 button to switch to the adjustable 

speed limiter.

c

The adjustable speed limiter indicator (white) is on in the gauge. Adjustable 
speed limiter is ready to use.

How to use

uu

When Driving

u

Adjustable Speed Limiter

406

Driving

•

Take your foot off the pedal and press the 

SET/−

 button when you reach the 

desired speed. 
The moment you release the 

SET/−

 button, the speed limit is fixed, and the 

adjustable speed limiter is set. The speed limit is displayed.

•

You can set the previously set speed limit by pressing the 

RES/+

 button.

■

To Set the Vehicle Speed

1

To Set the Vehicle Speed

If you set the speed limit while travelling at less than 
30 km/h (18 mph), the speed limit is set to 30 km/h 
(18 mph).

The beeper sounds and the displayed speed limit 
blinks if the vehicle speed exceeds the limit by 3 km/h 
(2 mph) or more on a steep descent.

The adjustable speed limiter is set to the current 
speed if it is higher than the previously set speed limit 
when you press the 

RES/+

 button.

You can switch the displayed set speed 
measurements between km/h and mph on the driver 
information interface or the audio/information 
screen.

2

Unit Change

 P. 168

2

Customized Features

 P. 327

a

SET/−

 Button

b

On when the adjustable speed limiter is set (green)

c

RES/+

 Button

d

Setting Status (green)

Continued

407

uu

When Driving

u

Adjustable Speed Limiter

Driving

Increase or decrease the speed limit by using the 

RES/+

 or 

SET/−

 buttons on the 

steering wheel.

•

Each time you press the button, the speed limit increases or decreases by 1 km/h 
or 1 mph accordingly.

•

If you keep the button pressed, the speed limit increases or decreases in 
increments of 10 km/h or 10 mph every 0.5 second until system limit is reached.

•

The vehicle may accelerate or decelerate until the set speed is reached.

The speed limit can be exceeded by depressing the acceleration pedal completely.

u

The displayed limit speed blinks.

u

The beeper sounds once the speed limit has been exceeded.

■

To Adjust the Speed Limit

a

To increase speed

b

To decrease speed

■

Exceeding the Speed Limit Temporarily

1

Exceeding the Speed Limit Temporarily

The beeper sounds when the vehicle speed goes 
higher than the set speed limit with the acceleration 
pedal depressed completely.

The adjustable speed limiter resumes working once 
the vehicle speed goes lower than the set speed limit.

uu

When Driving

u

Adjustable Speed Limiter

408

Driving

To cancel the adjustable speed limiter, do any 
of the following:

•

Press the 

CANCEL

 button.

•

Press the 

 button.

•

Press the 

LIM

 button.

■

To Cancel

1

To Cancel

The adjustable speed limiter changes into Adaptive 
Cruise Control (ACC) with Low Speed Follow or 
Intelligent Speed Limiter if the 

LIM

 button is pressed.

Resuming the prior set speed:

CANCEL

 button, the prior set speed is displayed on 

the gauge in gray.
When pressing the 

RES/+

 button, the adjustable 

speed limiter is activated with displayed speed.
If the adjustable speed limiter is set to the current 
speed if it is higher than the previously set speed limit 
when you press the 

RES/+

 button.

a

Adjustable Speed Limiter Indicator 
(white)

b

Prior Set Speed (gray)

c

Setting Status (gray)

a

LIM

 Button

b

CANCEL

 Button

c

 Button

409

uu

When Driving

u

Adjustable Speed Limiter

Driving

1

To Cancel

If there is a problem with the system when you are 
using the adjustable speed limiter, the beeper sounds 
and 

OFF

 comes on. The adjustable speed limiter will 

be turned off.

a

Adjustable Speed Limiter Indicator 
(white)

410

uu

When Driving

u

Intelligent Speed Limiter

Driving

Intelligent Speed Limiter

Automatically sets the speed limit that the traffic sign recognition system detects. 
And the speed limit cannot be exceeded even if you are depressing the accelerator 
pedal. If you fully depress the accelerator the speed limit can be exceeded.

2

Traffic Sign Recognition System

 P. 488

1

Intelligent Speed Limiter

Depending on the amount of depression of the 
accelerator pedal, the vehicle will accelerate until it 
reaches the speed identified by the traffic sign 
recognition system.

3

WARNING

Intelligent Speed Limiter has limitations. 
The Intelligent Speed Limiter may set itself 
to a speed above or below the actual speed 
limit, or may not work, particularly where 
the traffic sign recognition system does not 
operate correctly or where a road has no 
speed limit signs. It is always your 
responsibility to adjust the speed to obey 
the actual speed limit and to safely operate 
the vehicle.

Continued

411

uu

When Driving

u

Intelligent Speed Limiter

Driving

1

Intelligent Speed Limiter

The system is designed to detect signs that follow the 
Vienna Convention standards. Not all signs may be 
detected, but any signs posted on roadsides should 
not be ignored. The system does not work on the 
designated traffic signs of all the countries you travel, 
nor in all situations.

2

Traffic Sign Recognition System

 P. 488

If the intelligent speed limiter is set to the wrong 
speed limit, try one of the following:
To cancel

•

Press the 

CANCEL

 button.

•

Press the 

 button.

•

Press the 

LIM

 button.

To exceed the speed limit temporarily

•

Depressing the accelerator pedal fully.

The intelligent speed limiter may not hold the set 
speed limit when driving downhill. If this occurs, slow 
down by depressing the brake pedal.

When not using the intelligent speed limiter, turn off 
the intelligent speed limiter by pressing the 

 

button.

You cannot use the intelligent speed limiter and ACC 
with Low Speed Follow or adjustable speed limiter at 
the same time.

a

Press the 

 button on the steering wheel.

b

If a different indicator comes on, press the 

LIM

 button to change it to the 

intelligent speed limiter.

c

The intelligent speed limiter indicator (white) is on in the gauge. Intelligent speed 
limiter is ready to use.

How to use

uu

When Driving

u

Intelligent Speed Limiter

412

Driving

1

Intelligent Speed Limiter

Do not use the intelligent speed limiter in areas of 
different units from the display unit of the intelligent 
speed limiter.
Change the displayed measurement of the set vehicle 
speed to the same units as the driving areas.

2

Unit Change

 P. 168

2

Customized Features

 P. 327

Continued

413

uu

When Driving

u

Intelligent Speed Limiter

Driving

•

The moment you release the 

SET/−

 button or 

RES/+

 button, the intelligent speed 

limiter is set to the speed limit that the traffic sign recognition system detects. The 
speed limit is displayed.

■

To Set the Speed Limit

1

To Set the Speed Limit

If you set the intelligent speed limiter when the speed 
limit that the traffic sign recognition system detects is 
less than 30 km/h (18 mph), the speed limitation 
function and warning function may switch to pause.

If your vehicle speed is higher than the speed limit 
that the traffic sign recognition system detects, your 
vehicle decelerates slowly to the speed limit or less. If 
necessary, slow down by depressing the brake pedal.
And the beeper sounds and the displayed speed limit 
blinks if the vehicle speed exceeds the limit by 3 km/h 
(2 mph) or more.

The intelligent speed limiter may also switch to pause 
when the traffic sign recognition system detects only 
additional speed limit signs.

a

SET/−

 Button

b

On when the intelligent speed limiter is set to the speed limit that the traffic sign 
recognition system detects.

c

RES/+

 Button

d

Intelligent Speed Limiter Indicator (green)

e

Setting Status (green)

414

uu

When Driving

u

Intelligent Speed Limiter

Driving

■

When the traffic sign recognition system detects the new speed limit sign

The intelligent speed limiter is set to the new speed limit that the traffic sign 
recognition system detects.

■

The speed limitation function and warning function may switch to pause 
if there is no speed limit sign in the screen of the traffic sign recognition 
system when:

•

The end of speed limit or other designated limit is detected.

•

Your vehicle enters/exits motorway or highway.

•

You make a turn with a turn signal to change direction at an intersection.

415

uu

When Driving

u

Intelligent Speed Limiter

Continued

Driving

■

When the traffic sign recognition system detects the speed limit sign while 
the intelligent speed limiter is paused

The speed limitation function and warning function will be resumed automatically.

■

When the traffic sign recognition system does not detect the speed limit 
sign for a time while the intelligent speed limiter is activated

While driving, in addition to when the traffic sign recognition system detects no 
speed limit sign, the traffic sign recognition system may display no speed limit.
But, intelligent speed limiter functions continue.

uu

When Driving

u

Intelligent Speed Limiter

416

Driving

Increase or decrease the speed limit by using the 

RES/+

 or 

SET/−

 buttons on the 

steering wheel.

•

Each time you press the button, the speed limit is increased or decreased by about 
1 km/h or 1 mph accordingly.

•

You can increase the speed limit until +10 km/h or +5 mph on the basis of the 
speed limit that the traffic sign recognition system detects.

•

You can decrease the speed limit until -10 km/h or -5 mph on the basis of the 
speed limit that the traffic sign recognition system detects.

•

You can accelerate until the set speed is reached. If your vehicle speed is higher 
than the speed limit that the traffic sign recognition system detects, your vehicle 
decelerates slowly to the speed limit.

■

To Adjust the Speed Limit

1

To Adjust the Speed Limit

A negative or positive offset with respect to the 
speed limit will be reset automatically when the 
traffic sign recognition system detects the new speed 
limit sign.

You cannot decrease the speed limit less than 
30 km/h (18 mph).

a

To increase speed

b

To decrease speed

417

uu

When Driving

u

Intelligent Speed Limiter

Driving

The speed limit can be exceeded by depressing the accelerator pedal fully.

u

The displayed speed limit blinks.
The beeper sounds once the speed limit has been exceeded.

To cancel the intelligent speed limiter, do any 
of the following:

•

Press the 

CANCEL

 button.

•

Press the 

 button.

•

Press the 

LIM

 button.

■

Exceeding the Speed Limit Temporarily

■

To Cancel

1

Exceeding the Speed Limit Temporarily

The beeper sounds when the vehicle speed goes 
higher than the set speed limit with the acceleration 
pedal depressed completely.

The intelligent speed limiter resumes working once 
the vehicle speed goes lower than the set speed limit.

1

To Cancel

The intelligent speed limiter changes into adaptive 
cruise control (ACC) with Low Speed Follow or 
adjustable speed limiter if the 

LIM

 button is pressed.

If there is a problem with the system or traffic sign 
recognition system when you are using the intelligent 
speed limiter, the beeper sounds and 

OFF

 comes on. 

The intelligent speed limiter will be turned off.

2

Traffic Sign Recognition System

 P. 488

a

Intelligent Speed Limiter Indicator 
(white)

a

LIM

 Button

b

CANCEL

 Button

c

 Button