Honda Element. Manual - part 654

Fig. 2: Identifying PCV Valve, Hoses And Leaks Connections

2. At idle, make sure there is a clicking sound from the PCV valve when the hose between the PCV valve 

and intake manifold is lightly pinched (A) with your fingers or pliers. 

If there is no clicking sound, check the PCV valve washer for cracks or damage. If the washer is OK, 
replace the PCV valve and recheck. 

Fig. 3: Pinching PCV Hose 

PCV VALVE REPLACEMENT 

1. Disconnect the PCV hose.  

2. Remove the PCV valve (A). 

Fig. 4: Identifying PCV Valve And PCV Hose

 

2007 Honda Element EX 

2007-08 ENGINE PERFORMANCE PCV System - Element

  

3. Install the parts in the reverse order of removal with a new washer (B). 

 

2007 Honda Element EX 

2007-08 ENGINE PERFORMANCE PCV System - Element

  

2007-2008 ENGINE PERFORMANCE

PGM-FI System - Element 

COMPONENT LOCATION INDEX 

Fig. 1: Identifying PGM-FI System Components (1 Of 2) 
Courtesy of AMERICAN HONDA MOTOR CO., INC.

 

2007 Honda Element EX 

2007-2008 ENGINE PERFORMANCE PGM-FI System - Element

  

 

2007 Honda Element EX 

2007-2008 ENGINE PERFORMANCE PGM-FI System - Element

  

Fig. 2: Identifying PGM-FI System Components (2 Of 2) 
Courtesy of AMERICAN HONDA MOTOR CO., INC. 

DTC TROUBLESHOOTING 

DTC P0101: MAF SENSOR CIRCUIT RANGE/PERFORMANCE PROBLEM 

NOTE:



Before you troubleshoot, record all freeze data and any on-board 
snapshot, and review the general troubleshooting information (see 
GENERAL TROUBLESHOOTING INFORMATION ).  

 

2007 Honda Element EX 

2007-2008 ENGINE PERFORMANCE PGM-FI System - Element