Honda Element. Manual - part 615

While still holding button, turn ignition switch to ON position, with engine off. Hold SELECT/RESET 
button for about 10 seconds until indicator resets.  

ENGINE OIL LIFE INDICATOR 

2005-08 ODYSSEY 

LX, EX & EX-L Models 

1. Turn ignition switch to ON (II). Press SELECT/RESET knob until engine oil life indicator is displayed.  

2. Press SELECT/RESET knob for 10 seconds. Engine oil life indicator and the maintenance item code(s) 

will blink. Press SELECT/RESET knob for more than 5 seconds. Maintenance items code(s) will 
disappear and engine oil life indicator will reset to "100."  

Touring Model 

1. Turn ignition switch to ON (II). Press SELECT/RESET button on steering wheel until engine oil life is 

displayed.  

2. Press SELECT/RESET knob in instrument panel for 10 seconds. Display will change to "CUSTOM 

SETUP" mode. Press SELECT/RESET button on steering wheel. Maintenance item code(s) will 
disappear and engine oil life will reset to "100."  

3. To cancel resetting press INFO button on steering wheel. Press SELECT/RESET button. This cancels 

resetting procedure and normal display mode returns. Select "RESET" button and press SELECT/RESET 
button multi-information will.  

2006-08 ACCORD 

1. Turn ignition switch to ON (II). Press SELECT/RESET knob until engine oil life indicator is displayed.  

2. Press SELECT/RESET knob for 10 seconds. Engine oil life indicator and the maintenance item code(s) 

will blink. Press SELECT/RESET knob for more than 5 seconds. Maintenance items code(s) will 
disappear and engine oil life indicator will reset to "100."  

2006-08 CIVIC 

1. Turn ignition switch to ON (II). Press SELECT/RESET knob until engine oil life indicator is displayed.  

2. Press SELECT/RESET knob for 10 seconds. Engine oil life indicator and the maintenance item code(s) 

will blink. Press SELECT/RESET knob for more than 5 seconds. Maintenance items code(s) will 
disappear and engine oil life indicator will reset to "100."  

2006-08 CR-V 

1. Turn ignition switch to ON (II). Press SELECT/RESET knob until engine oil life indicator is displayed.  

2. Press SELECT/RESET knob repeatedly until engine oil life is displayed.  

3. Press the SELECT/RESET knob for about 10 seconds. The information display shows the reset mode 

initial display as shown.  

 

2007 Honda Element EX 

GENERAL INFORMATION Service Reminder Indicators - Honda

  

4. Select the "OIL LIFE" indicator by turning the SELECT/RESET knob. The display begins to blink. Push 

the same knob to enter this setting.  

5. The engine oil life and maintenance item code(s) will begin blink. Push the SELECT/RESET knob to 

reset.  

6. The maintenance item code(s) will disappear, and engine oil life will reset to "100".  

2006-08 ELEMENT 

1. Turn ignition switch to ON (II). Press SELECT/RESET knob until engine oil life indicator is displayed.  

2. Press SELECT/RESET knob for 10 seconds. Engine oil life indicator and the maintenance item code(s) 

will blink. Press SELECT/RESET knob for more than 5 seconds. Maintenance items code(s) will 
disappear and engine oil life indicator will reset to "100."  

2006-08 PILOT 

1. Turn ignition switch to ON (II). Press SELECT/RESET knob until engine oil life indicator is displayed.  

2. Press SELECT/RESET knob for 10 seconds. Engine oil life indicator and the maintenance item code(s) 

will blink. Press SELECT/RESET knob for more than 5 seconds. Maintenance items code(s) will 
disappear and engine oil life indicator will reset to "100."  

2006-08 S2000 

1. Turn ignition switch to ON (II). Press TRIP button until engine oil life indicator is displayed.  

2. Press TRIP knob for 10 seconds. Engine oil life indicator and the maintenance item code(s) will blink. 

Press TRIP knob for more than 5 seconds. Maintenance items code(s) will disappear and engine oil life 
indicator will reset to "100."  

2007-08 RIDGELINE 

1. Turn ignition switch to ON (II) position.  

2. Press SELECT button repeatedly until engine oil life display or service message is displayed.  

3. Press the RESET button for about 10 seconds. A "MAINT RESET" message will appear.  

4. Select appropriate answer - "MAINT RESET >N" (NO) or "MAINT RESET >Y" (YES) by pressing the 

select button. ">N" or ">Y" is displayed on the outside temperature display.  

5. Select the "MAINT RESET >Y" (YES), and press and hold RESET button again to reset engine oil life to 

"100".  

OXYGEN SENSOR WARNING LIGHT 

1994-95 PASSPORT (DX MODEL) 

1. Heated Oxygen Sensor (HO2S) must be replaced every 90,000 miles. When odometer reaches 90,000 

miles, O2S indicator light on dash will illuminate, and then every subsequent 90,000 miles. After 
servicing, turn off or reset warning light. 

 

2007 Honda Element EX 

GENERAL INFORMATION Service Reminder Indicators - Honda

  

2. To reset warning light, remove instrument cluster. Remove masking tape from hole "B". See Fig. 6 or 

Fig. 7 . Remove screw from hole "A" and insert into hole "B". Apply new masking tape to hole "A".  

Fig. 6: Identifying Oxygen Sensor Warning Light Reset Holes (2.6L) 
Courtesy of AMERICAN HONDA MOTOR CO., INC.

NOTE:

Reset procedure is for first 90,000 mile reset. At every subsequent 90,000 
mile reset, move screw back to previous hole.

 

2007 Honda Element EX 

GENERAL INFORMATION Service Reminder Indicators - Honda

  

Fig. 7: Identifying Oxygen Sensor Warning Light Reset Holes (3.2L) 
Courtesy of ISUZU MOTOR CO. 

TIRE PRESSURE MONITOR SYSTEM 

2005-08 ODYSSEY 

1. To put the gauge control module into the self-diagnostic mode, perform the following: 



Turn the headlight switch to ON.  



Press and hold the SELECT/RESET (Instrument panel brightness) knob.  

NOTE:

If a flat tire is replaced with the spare tire, and the flat tire is stored in the cargo 
area, the low pressure indicator will stay on but the appropriate tire indicator 
will go off. This prevents the customer from thinking there is a problem with the 
spare tire. When the flat tire is taken out of the vehicle for repair, the TPMS 
indicator will come on because the system is no longer receiving the signal 
from the tire's transmitter.

NOTE:

When a tire pressure sensor is replaced or tires are rotated, the sensor ID must 
be memorized by the TPMS control unit. See TIRE PRESSURE SENSOR 
REGISTRATION in appropriate manufacturer service information.

NOTE:

On models equipped with PAX tire systems, if a tire is repaired or replaced, the 
warning indicator (and the mileage counter that supports it) must be reset, no 
matter how far the vehicle was driven in the run flat mode.

 

2007 Honda Element EX 

GENERAL INFORMATION Service Reminder Indicators - Honda