FE12-0040b

3.

Install  the  front  door  sill  nameplate  and  tighten  the
retaining nut..

Torque: 4 Nm (Metric) 3.0 lb-ft (US English)

4.

Press the front door sill nameplate into position.

Note

Left and right door sill nameplate replacements are
the same.

12.9.1.3 

Windshield 

Garnish 

Molding

Replacement

Removal Procedure:

Note

To  remove  windshield  garnish  molding,  please  use
interior  trim  panel  removal  tools.  Otherwise,  the
windshield garnish molding will easily be scratched.

2

1

1

FE12-0041b

1.

Unclip the retaining clip (1) and a D-shape clip from the
windshield garnish molding.

2.

Pull upward to disengage the windshield garnish molding
(2) from the A pillar body panel.

Body, Sheet Metal and Painting

Interior Trim

12-77

FE12-0042b

3.

Disengage the clip from the windshield garnish molding
and  remove  the  windshield  garnish  molding  from  the
vehicle.

Installation Procedure:

FE12-0043b

1.

Engage the clip to the windshield garnish molding.

2

1

3

FE12-0044b

2.

Insert the windshield garnish molding (2) lower end into
the instrument panel.

3.

Press the the windshield garnish molding to secure the D-
shape clip (1) and the retaining clips (2), (3).

12-78

Interior Trim

Body, Sheet Metal and Painting

12.9.1.4 Center Pillar Trim Panel Replacement

Removal Procedure:

Note

To remove the center pillar trim panel, please use interior
trim panel removal tools. Otherwise, the center pillar trim
panel will easily be scratched.

1

2

FE12-0045b

1.

Remove  the  left  and  right  door  sill  nameplate.  Refer  to

12.9.1.2

 

Left  and  Right  Door  Sill  Nameplate

Replacement

.

2.

Remove the door seal (1).

3.

Detach the D-shape retaining clips from the center pillar
lower trim panel, detach the retaining tangs from the upper
part of the center pillar lower trim panel, and remove the
center pillar lower trim panel (2).

1

2

FE12-0046b

4.

Remove  the  front  seat  belt  height  adjuster  bolt  and
remove the seat belt (1). Refer to 

9.3.7.5

 

Front Seat Belt

Height Adjuster Replacement

.

5.

Remove the center pillar upper trim panel retaining screw
cover (2).

Body, Sheet Metal and Painting

Interior Trim

12-79

3

2

1

FE12-0047b

6.

Remove the center pillar upper trim panel retaining screw
and washer assembly (1).

7.

Detach the center pillar upper trim panel clip (2) from the
lower part of the panel.

8.

Remove  the  center  pillar  upper  trim  panel  (3)  from  the
center pillar.

Installation Procedure:

2

1

FE12-0048b

1.

Install the center pillar upper trim panel to the mounting
hole (1).

2.

Press the lower part of the center pillar lower trim panel to
secure the retaining clip (2).

3

2

1

FE12-0049b

3.

Install the center pillar upper trim panel retaining screw
and washer assembly (1).

Torque: 3.5 Nm (Metric) 2.6 lb-ft (US English)

4.

Install the center pillar upper trim panel retaining screw
cover (2).

5.

Install the seat belts (3).

12-80

Interior Trim

Body, Sheet Metal and Painting