Symbols

Indicator

Color

Driver Seat Belt Warning Lamp

Red

Airbag Fault Warning Lamp

Red

Tire Pressure Warning Lamp

Yellow

Tire Pressure Management System Indicator

Yellow

Headlamp High Beam Indicator

Blue

Body Electric

Instrument / Driver Information System

11-273

Symbols

Indicator

Color

Fuel Level Too Low Warning Lamp

Yellow

Engine Overheating Warning Lamp

Red

ABS

ABS Failure Warning Lamp

Yellow

EBD Fault Warning Lamp

Yellow

P

Park Brake Indicator

Red

11-274

Instrument / Driver Information System

Body Electric

Symbols

Indicator

Color

Brake Failure / Brake Fluid Low Warning Lamp

Red

Left Turn Indicator

Green

Right Turn Indicator

Green

Daylight Running Light (If Equipped)

Grass Green

Body Electric

Instrument / Driver Information System

11-275

11.7.2 Description and Operation
11.7.2.1 Display

There  are  2  LCD  screens  (primary,  secondary)  on  the
instrument  panel,  installed  on  the  primary  and  secondary
instrument panels.
The primary LCD is divided into two parts. Upper half shows
the fuel, engine temperature, and four doors conditions; lower

half  shows  odometer,  reverse  radar,  transmission  gear,  trip
meter,  driving  time,  average  speed  and  remaining  mileage.
LCD can also be divided into left and right half. Left half shows
transmission gear and ODO symbols. The right half is divided
into  upper,  middle  and  lower  three  rows.  Upper  row  shows
reverse radar and remaining mileage; the middle row shows
trip meter, driving time, average speed, remaining mileage; the
lower row shows odometer. Refer to the following diagram:

E

C

F

H

ODO

km/h

km

7

8

6

5

1

2

3

4

FE11-2014b

Legend

1. Doors Open Information
2. Fuel Information
3. Reverse Radar Symbol
4. Gear Information (Automatic Transmission Models)
5. Odometer
6. Mode Switching Display: Trip Meter, Driving Time,

Average Speed, Remaining Mileage

7. Remaining Mileage
8. Engine Coolant Temperature Information

11.7.2.2 Odometer Display Mode Switch

LCD lower half right side middle row shows four different types
of values, including the trip meter, driving time, average speed

and remaining mileage, press the Mode button to switch (Refer
to 

11.7.4.1

 

Component  Locator

).  Only  when  the  engine  is

running, mode button and the Clear button can be used.
Mode switching logic is shown below:

11-276

Instrument / Driver Information System

Body Electric