FE11-0303b

4.

Remove  the  front  door  inside  handle  retaining  screw
cover.

FE11-0304b

5.

Remove the front door trim panel retaining screw.

Note

There are two retaining screws at the lower side of
the front door trim panel.

FE11-0305b

6.

Remove the front door trim panel.

Note

Do not to damage the the wiring harness connectors
inside the front door trim panel.

Body Electric

Glasses / Windows / Mirrors

11-185

FE11-0306b

7.

Disconnect the front tweeter harness connector.

FE11-0307b

8.

Disconnect  the  front  window  switch  harness  connector
and remove the front door trim panel.

FE11-0308b

9.

Disconnect  outside  rearview  mirror  harness  connector,
loose the outside rearview mirror bracket nut.

10. Leave  the  nut  on  the  top  and  remove  the  other  two

rearview mirror bracket nuts.

11. Hold  the  outside  rearview  mirror  and  remove  the

remaining nut.

11-186

Glasses / Windows / Mirrors

Body Electric

12. Remove the outside rearview mirror assembly.

Installation Procedure:

1.

Install the outside rearview mirror assembly and tighten
the retaining nuts.

Torque: 6 Nm (Metric) 4.4 lb-ft (US English)

Note

"Fastener Notice" in "Warnings and Notices"

2.

Connect the outside rearview mirror harness connector.

FE11-0311b

3.

Connect  the  front  window  switch  wiring  harness
connector.

Body Electric

Glasses / Windows / Mirrors

11-187

FE11-0312b

4.

Connect the front tweeter harness connector.

5.

Install the new clips to the front door trim panel.

6.

Install the front door trim panel.

Torque: 2 Nm (Metric) 1.5 lb-ft (US English)

7.

Install the front door armrest retaining screw cover.

Torque: 2 Nm (Metric) 1.5 lb-ft (US English)

8.

Install the front door handle retaining screw cover.

9.

Install the front door triangular panel.

10. Connect the battery negative cable.

11.5.8.2 Inside Rearview Mirror Replacement

Removal Procedure

FE11-0313b

1.

Remove  the  inside  rearview  mirror  from  the  retaining
bracket.

2.

Remove the inside rearview mirror bracket.

Note

The  inside  rearview  mirror  is  bonded  to  the
windshield using a special adhesive.

Installation Procedure:

FE11-0314b

1.

Use dedicated cleaning agent to clean the inside rearview
mirror bracket installation surface.

2.

Apply  the  adhesive  according  to  the  adhesive
requirements.

3.

Position the inside rearview mirror bracket to the marked
position, with the constant pressure to press the bracket
on the glass for 1-2 min.

4.

Use dedicated cleaning agent to remove excess adhesive
after 5 min.

11-188

Glasses / Windows / Mirrors

Body Electric