Rear  Dome  Lamp  and  Reading  Lamp
Replacement

Removal Procedure

Warning!

Refer to "Battery Disconnect Warning" in "Warnings and
Notices".

FE11-0229b

1.

Disconnect  the  battery  negative  cable.  Refer  to

2.11.8.1

 

Battery Disconnection

.

2.

Insert  a  special  tool  to  the  dome  lamp  cover  edge  to
remove the cover.

FE11-0228b

3.

Remove the screws and the door controlled lamp cover.

1

2

2

FE11-0230b

4.

Disconnect the rear dome lamp wiring harness connector
(1).

Body Electric

Lighting System

11-121

5.

Remove the lamp bulb (2).

Installation Procedure:

1.

Install the lamp bulb (1).

2.

Connect the electrical wiring harness connector (2).

3.

Install the rear dome lamp.

Note

"Fastener Notice" in "Warnings and Notices".

Torque: 4 Nm (Metric) 3 lb-ft (US English)

4.

Press the door controlled lamp cover into place.

5.

Connect the battery negative cable.

11.4.8.5 Rear Compartment Lamp (Hatchback
Lamp) Replacement

Removal Procedure

FE11-0231b 

1.

Remove the rear compartment lamp cover.

Note

Hatchback lamp cover for hatchback.

2.

Remove the rear compartment lamp (Hatchback Lamp)
bulb.

Installation Procedure:

FE11-0232b 

1.

Install  the  rear  compartment  lamp  (Hatchback  Lamp)
bulb.

2.

Install the rear compartment lamp cover (hatchback lamp
cover).

11-122

Lighting System

Body Electric

11.4.8.6 Glove Box Lamp Replacement

Removal Procedure

FE11-0233b

1.

Remove the glove box lamp cover.

2.

Disconnect the wiring harness connector.

3.

Remove the glove box lamp bulb.

Installation Procedure:

FE11-0234b

1.

Install the glove box lamp bulb.

2.

Connect the wiring harness connector.

3.

Press the glove box lamp cover into place.

11.4.8.7 Front Fog Lamp Replacement

Removal Procedure

Warning!

Refer to "Battery Disconnect Warning" in "Warnings and
Notices".

Body Electric

Lighting System

11-123

FE11-0235b

1.

Disconnect  the  battery  negative  cable.  Refer  to

2.11.8.1

 

Battery Disconnection

.

2.

Remove the engine bottom shield. Refer to 

12.10.1.7

 

Left

and Right Engine Bottom Shield Replacement

.

FE11-0237b

3.

Disconnect  the  fog  lamp  assembly  wiring  harness
connector.

FE11-0239b

4.

Remove the fog lamp retaining bolts.

5.

Remove the fog lamp assembly.

6.

Loose  the  fog  lamp  assembly  screws  and  remove  the
bulb.

11-124

Lighting System

Body Electric