FE02-0450b

7.

Disconnect  the  electronic  anti-theft  wiring  harness  coil
connector.

FE02-0451b

8.

Remove the electronic anti-theft engine coil.

Installation Procedure:

FE02-0452b

1.

Install the electronic anti-theft engine coil.

Engine

Engine Anti-theft System JL4G18-D

2-295

FE02-0453b

2.

Connect  the  electronic  anti-theft  wiring  harness  coil
connector.

FE02-0454b

3.

Install the upper steering column shield.

FE02-0455b

4.

Install the lower steering column shield.

5.

Install and tighten the left upper steering column shield
retaining screw.

Torque: 2 Nm (Metric) 1.5 lb-ft (US English)

6.

Install and tighten the right upper steering column shield
retaining screw.

Torque: 2 Nm (Metric) 1.5 lb-ft (US English)

7.

Install  and  tighten  the  lower  steering  column  shield
retaining screw.

Torque: 2 Nm (Metric) 1.5 lb-ft (US English)

8.

Connect the battery negative cable.

2-296

Engine Anti-theft System JL4G18-D

Engine

2.5.8.2  Anti-theft  System  Control  Module
Replacement

Removal Procedure:

Warning!

Refer to "Battery Disconnection Warning" in "Warnings
and Notices".

FE02-0456b

1.

Disconnect  the  battery  negative  cable.  Refer  to

2.11.8.1

 

Battery Disconnection

.

2.

Remove  instrument  panel  trim  under  the  driver's  side.
Refer to 

11.10.8.1

 

BCM Replacement

.

3.

Remove  the  anti-theft  system  control  module  retaining
bolts.

FE02-0457b

4.

Disconnect  anti-theft  system  control  module  wiring
harness connector.

Engine

Engine Anti-theft System JL4G18-D

2-297

Installation Procedure:

FE02-0458b

1.

Install the anti-theft system control module.

Torque: 10 Nm (Metric) 7.4 lb-ft (US English)

2.

Connect anti-theft system control module wiring harness
connector.

3.

Install instrument panel trim under the driver's side.

4.

Connect the battery negative cable.

2-298

Engine Anti-theft System JL4G18-D

Engine