Ford Maverick (2022 year). Manual in english

SATELLITE RADIO

WHAT IS SATELLITE RADIO

Your factory-installed SiriusXM radio
system includes a limited subscription
term, which begins on the date of sale or
lease of your vehicle. See an authorized
dealer for availability.

For additional information about extended
subscription terms, visit

www.SiriusXM.com

in the United States,

www.SiriusXM.ca

Canada, or call SiriusXM at
1-888-539-7474.

Note:

SiriusXM reserves the unrestricted

right to change, rearrange, add or delete
programming including canceling, moving
or adding particular channels, and its prices,
at any time, with or without notice to you.
Neither SiriusXM and its affiliates nor Ford
Motor Company and its affiliates will be
liable to you or any third party for any such
modification, suspension or termination.

SATELLITE RADIO LIMITATIONS

For optimal reception performance, keep
the antenna clear of snow and ice build-up
and keep luggage and other material as
far away from the antenna as possible.
Placing luggage over the antenna may
reduce performance.

Hills, mountains, tall buildings, bridges,
tunnels, freeway overpasses, parking
garages, dense tree foliage and
thunderstorms can interfere with your
reception.

When you pass a ground-based
broadcast-repeating tower, a stronger
signal may overtake a weaker one and
could result in the audio system muting.
Your display could show an error message
to indicate the interference.

LOCATING THE SATELLITE RADIO
IDENTIFICATION NUMBER

Select SiriusXM as the audio source.

2. Tune to channel 0.

388

Audio System - Vehicles With: SYNC 3

GENERAL INFORMATION

WARNING:

Driving while distracted

can result in loss of vehicle control, crash
and injury. We strongly recommend that
you use extreme caution when using any
device that may take your focus off the
road. Your primary responsibility is the
safe operation of your vehicle. We
recommend against the use of any
hand-held device while driving and
encourage the use of voice-operated
systems when possible. Make sure you
are aware of all applicable local laws
that may affect the use of electronic
devices while driving.

About SYNC

The system allows you to interact with the
entertainment, information and
communication systems on your vehicle
using voice commands and a touchscreen.
The system provides easy interaction with
audio, phone, navigation, mobile apps and
settings.

Note:

You can switch the system on and

use it for up to an hour without switching
the ignition on.

Note:

You can use the system after you

switch the ignition off for up to 10 minutes
or until you open a door.

Note:

For your safety, some features are

speed-dependent. Their use is limited to
when your vehicle speed is less than 3 mph
(5 km/h).

Using the Touchscreen

E293823

Status bar.

Home screen.

Clock. See

Settings

(page 418).

Outside air temperature.

Feature bar.

Status Bar

Cell phone microphone muted.

Audio system muted.

Software update installed.

Wi-Fi connected.

Cell phone roaming.

Text message received.

389

SYNC™ 3

(If Equipped)

Automatic crash notification
system off.

Cell phone network signal
strength.

Vehicle data sharing on.

Vehicle location sharing on.

Vehicle data and vehicle location
sharing on.

Wireless charger active.

Feature Bar

E100027

Select to use the radio, a USB, a
media player or a

Bluetooth®

device. See

Entertainment

(page 398).

E283811

Select to adjust climate settings

Select to make calls and access
the phonebook on your cell
phone. See

Phone

(page 408).

Select to use the navigation
system. See

Navigation

(page

410).

Select to search for and use
compatible apps on your iOS or
Android device. See

Apps

(page

416).

E280315

Select to adjust system settings.
See

Settings

(page 418).

Cleaning the Touchscreen

See

Cleaning Displays and Screens

(page 322).

Updating the System

Updating the System Using a USB Drive

Downloading an Update

Go to the SYNC update page on the
local Ford website.

2. Download the update.

Note:

The website notifies you if an update

is available.

3. Insert a USB drive into your computer.

Note:

The USB drive needs to be empty and

meet the minimum requirements detailed
on the website.

4. Follow the instructions provided to

download the update to the USB drive.

Installing an Update

Note:

You can use the system when an

installation is in progress.

Disconnect all other USB devices from
the USB ports.

2. Connect the USB drive with the update

to a USB port.

Note:

Installation starts automatically

within 10 minutes.

Updating the System Using a Wi-Fi
Network Connection

Connecting to a Wi-Fi Network

E280315

Select the settings option on the
feature bar.

Select

Automatic Updates

2. Select

System Wi-Fi

3. Switch

System Wi-Fi

on.

4. Select

Available Wi-Fi Networks

5. Select an available Wi-Fi network.

Note:

Enter the network password to

connect to a secure network.

390

SYNC™ 3

(If Equipped)

Switching Automatic System Updates
On

E280315

Select the settings option on the
feature bar.

Select

Automatic Updates

2. Switch

Automatic System Updates

on.

The system is now set to check for and
receive system updates when it is
connected to a Wi-Fi network.

Note:

You can use the system when a

download is in progress.

Note:

If the system is disconnected from

the Wi-Fi network when a download is in
progress, the download continues the next
time the system is connected to a Wi-Fi
network.

Additional Information and
Assistance

For additional information and assistance,
we recommend that you contact an
authorized dealer or refer to the local Ford
website.

USING VOICE RECOGNITION

The SYNC 3 system allows you to use voice
commands to control features like audio
and climate controls. By using voice
commands, you can keep your hands on
the wheel and your eyes on the road.

You can access each feature controlled by
SYNC 3 through a variety of commands.

E142599

To activate the SYNC 3 voice
commands push the voice
button on the steering wheel and

wait for the prompt.

___ is a dynamic listing, meaning that it can
be the name of anything, such as artist, the
name of contact or number. The context
and the description of the command tell
you what to say for this dynamic option.

There are some commands that work for
every feature, these commands are:

Action and Description

Voice Command

Brings you to the main menu.

Main Menu

Returns you to the previous screen.

Go back

Ends the voice session.

Cancel

Gives you a list of possible voice commands.

List of Commands

You can name any feature and the system gives a list of
commands available for the feature. For example, you could
say:

___ List of Commands

Phone List of Commands

Navigation List of Commands

391

SYNC™ 3

(If Equipped)

Action and Description

Voice Command

You can use this command to view the next page of options on
any screen where multiple pages of choices are given.

You can use this command to view the previous page of options
on any screen where multiple pages of choices are given.

Gives you available commands you can use on the current
screen.

Help

Included here are some of the most
popular commands for each SYNC 3
feature.

Audio Voice Commands

___ is a dynamic listing, meaning that for
audio voice commands it can be the name
of a Sirius channel or a channel number, a
radio frequency number, or the name of an
artist, album, song or a genre.

To control the media features, press the voice button and when prompted, say:

Description

Voice Command

You can say the Sirius channel name or number
such as "Sirius channel 16".

Sirius Channel ___

You can also tune to a Sirius channel by saying the channel's name, such as "The Pulse".

Allows you to tune to a specific FM or AM
frequency such as "FM 88.7" or "AM 1580".

AM ___

FM ___

Allows you to tune to a specific HD frequency
such as “FM 88.7 HD 1”.

FM ___ HD ___

Allows you to listen to music on your

Bluetooth®

connected device.

Bluetooth Audio

Allows you to listen to music on your USB
connected device.

USB

For USB audio only, you can say the name of an
artist, album, song or a genre to listen to that
selection. Your system must finish indexing
before this option is available. For example, you
could say "Play artist The Beatles" or "Play song
Penny Lane".

Play Genre ___

Play Playlist ___

Play Artist ___

Play Album ___

Play Podcast ___

Play Song ___

392

SYNC™ 3

(If Equipped)

Description

Voice Command

Play Audiobook ___

For USB audio only, you can say the name of an
artist, album, or a genre to browse by that selec-
tion. Your system must finish indexing before this
option is available. For example you can say
"Browse artist The Beatles" or "Browse genre
folk".

Browse ___

Browse Artist ___

Browse Album ___

Browse Genre ___

Browse Playlist ___

Browse Audiobook ___

Browse Podcast ___

This option may not be available in all markets or may require a subscription.

Climate Voice Commands

(If Equipped)

You can control the temperature of the
vehicle using voice commands.

___ is a dynamic listing, meaning that for
climate voice commands it can be the
desired degrees for the temperature
setting.

To adjust the temperature, say:

Description

Voice Command

Adjust the temperature between 60–85°F

(15.5–29.5°C).

Set the Temperature to ____

Phone Voice Commands

Pairing a Phone

You can use voice commands to connect
your

Bluetooth®

-enabled phone to the

system.

To pair your phone, press the voice button and when prompted, say:

Description

Voice Command

Follow the on-screen instructions to complete the pairing

process. See

Settings

(page 418).

Pair Phone

393

SYNC™ 3

(If Equipped)

Making Calls

___ is a dynamic listing, meaning that for

phone voice commands it can be the name
of the contact you wish to call or the digits
you want to dial.

Press the voice button and say a command similar to the following:

Description

Voice Command

Allows you to call a specific contact from your phonebook
such as "Call Jenny".

Call ___

Allows you to call a specific contact from your phonebook
at a specific location such as "Call Jenny at Home".

Call ___ at ___

Allows you to dial a specific number such as “Dial 867-5309”.

Dial ___

Please make sure that you are saying the
contact name exactly as it appears in your
contact list.

Once you have provided the digits of the phone number, you can say the following
commands:

Description

Voice Command

If you did not enter the full number with the first command, you
can continue saying the number.

<0-9>

Tells SYNC 3 to make the phone call.

Dial

Tells SYNC 3 to erase the last block of digits you state.

Delete

Tells SYNC 3 to erase the entire number.

Clear

394

SYNC™ 3

(If Equipped)

Text Message Voice Commands

To access text message options, press the voice button and say:

Description

Voice Command

Listen to Message

You can say the number of the message you
would like to hear.

Listen to text message ___

Reply to Message

You can say the number of the message you
would like to respond to.

Reply to Message ____

You can say the contact of the most recent
message to respond.

Reply to ____

Navigation Voice Commands

(If

Equipped)

Setting a Destination

You can use any of the following
commands to set a destination or find a
point of interest.

___ is a dynamic listing, meaning that for
navigation voice commands it can be a POI
category or a major brand name, where a
major brand name is a chain with more
than 20 locations.

You can find an address, a point of interest (POI), or search for points of interest
by category:

Description

Voice Command

Allows you to enter the address search functionality. You can
also search for an address in a specific state or province.

Find an Address

State the name of the POI category or major brand name you
would like to search for such as "Find restaurants".

Find a ___

Allows you to enter the POI search functionality.

Find a POI

Allows you to enter the intersection search functionality.

Find an Intersection

State the name of a POI category or major brand name you would
like to search for.

Find the Nearest
<POI Category>

Allows you to see a list of your previous destinations.

Show Previous
Destinations

395

SYNC™ 3

(If Equipped)

Description

Voice Command

Allows you to see a list of your favorite destinations.

Show Favorites

Allows you to route to your home address.

Drive Home

Allows you to route to your work address.

Drive to Work

In addition, you can say these commands when a route is active:

Description

Voice Command

Cancels the current route.

Cancel Route

Allows you to select an alternate route.

Detour

Repeats the last guidance prompt.

Repeat Instruction

Displays the active route.

Show Route

Displays the list of upcoming maneuvers.

Route Summary

Provides current location.

Where Am I

Allows you to zoom in on the map.

Zoom in

Allows you to zoom out from the map.

Zoom out

Mobile App Voice Commands

(If Equipped)

The following voice commands are always available:

Description

Voice Command

SYNC 3 will prompt you to say the name of an app to start it on
SYNC 3.

Mobile Apps

SYNC 3 will list all of the currently available Mobile Apps.

List Mobile Apps

SYNC 3 will search and connect to compatible app(s) running on
your mobile device.

Find Mobile Apps

396

SYNC™ 3

(If Equipped)

There are also voice commands that you can use when app(s) are connected to
SYNC 3:

Description

Voice Command

At any time, you can say the name of a mobile app to start the
mobile app on SYNC 3.

Say the name of an
app

SYNC 3 will list the available voice commands for the specified
app if the app is running on SYNC 3.

Say the name of an
app, followed by
help

SiriusXM Traffic and Travel Link
Voice Commands

(If Equipped)

SiriusXM Traffic and Travel Link may not
be available in all markets. Activation and
a subscription are required.

You can say the following commands to access SiriusXM Traffic and Travel Link:

Description

Voice Command

Displays a list of traffic incidents.

Show Traffic

Displays the current weather map.

Show Weather Map

Displays a list of fuel prices.

Show Fuel Prices

Displays the 5 day weather forecast.

Show 5 Day Fore-
cast

Help

Voice Settings Commands

You can say the following commands to access the voice settings:

Description

Voice Command

Allows you to enter the voice settings functionality.

Voice Settings

Sets standard prompting with longer prompts.

Interaction Mode
Standard

Sets advanced prompting with shorter prompts.

Interaction Mode
Advanced

Allows the system to confirm before making a phone call.

Phone Confirmation On

397

SYNC™ 3

(If Equipped)

Description

Voice Command

The system does not confirm before placing a call.

Phone Confirmation Off

The system displays a short list of available commands.

Voice Command Lists On

The system does not display the list of commands.

Voice Command Lists Off

You can use the volume control to adjust
the volume of the system voice prompts.
While prompt is active, adjust the volume
control up or down to your desired setting.

Note:

Depending on the current climate

control settings, the fan speed may
automatically go down while issuing voice
commands or while making and receiving
phone calls via SYNC to reduce the amount
of background noise in the vehicle. The fan
speed will automatically return to normal
operation once the voice session ends. You
can adjust the fan speed during a voice
session, simply press the fan buttons (or
turn the fan knob) to increase or decrease
the fan speed to the setting you prefer.

To disable this automatic fan speed
reduction feature during voice sessions,
press and hold the climate control AC and
Recirculated air buttons simultaneously,
release and then increase fan speed within
2 seconds. To re-enable this feature, repeat
the above sequence.

ENTERTAINMENT

E293491

Audio source. Select to choose
a different audio source.

Presets. Swipe left to view more
presets.

You can access these options using the
touchscreen or voice commands.

Sources

Press this button to select the source of
media you want to listen to.

398

SYNC™ 3

(If Equipped)

Menu Item

SIRIUS

The name of the USB that is plugged in displays here.

USB

Bluetooth Stereo

If you have SYNC 3 compatible apps on your connected smart phone, they
display here as individual source selections.

Apps

This feature may not be available in all markets and requires an active subscription.

AM/FM Radio

Tuning a Station

You can use the tune or seek controls on
the radio bezel to select a station.

To tune a station using the
touchscreen, select:

Menu Item

Direct Tune

A pop up appears, allowing you to type in
the frequency of a station. You can only
enter a valid station for the source you are
currently listening to.

You can press the backspace button to
delete the previously entered number.

Once you have entered the station's
call numbers, you can select:

Action and Descrip-

tion

Menu Item

Press to begin
playing the station
you have entered.

Enter

Press to exit
without changing
the station.

Cancel

Presets

To set a new preset, tune to the station
and then press and hold one of the
memory preset buttons. The audio mutes
briefly while the system saves the station
and then returns.

You may be able to add additional preset
pages using the settings option on the
feature bar.

399

SYNC™ 3

(If Equipped)

SiriusXM® Satellite Radio (If
Activated)

Note:

This feature may not be available in

all markets and requires an active
subscription.

E234451

SiriusXM satellite radio is a
subscription-based satellite radio service
that broadcasts a variety of music, sports,
news, weather, traffic and entertainment
programming. Your factory-installed
SiriusXM satellite radio system includes
hardware and a limited subscription term
that begins on the date of sale or lease of
your vehicle. See an authorized dealer for
availability.

For more information on extended
subscription terms (a service fee is
required), the online media player and a
list of SiriusXM satellite radio channels,
and other features, please visit
www.siriusxm.com in the United States,
www.siriusxm.ca in Canada, or call
SiriusXM at 1-888-539-7474.

Note:

SiriusXM reserves the unrestricted

right to change, rearrange, add or delete
programming. This includes canceling,
moving or adding particular channels, and
its prices, at any time, with or without notice
to you. We are not responsible for any such
programming changes.

Note:

This receiver includes the eCos

real-time operating system. eCos is
published under the eCos License.

The following buttons are available for SiriusXM:

Action and Description

Menu Item

Touch this button to see a list of available stations.

Browse

A pop-up appears, allowing you to type in the call numbers of
a station.

Direct Tune

Once you enter the stations call numbers, you can select:

The system tunes to the station you select.

Enter

You exit the pop-up and the current station
continues to play.

Cancel

You can press the backspace button to delete the previous
number.

400

SYNC™ 3

(If Equipped)

Action and Description

Menu Item

Replay audio on the current channel. You can replay approx-
imately 45 minutes of audio as long as you remain tuned to
the current station. Changing stations erases the previous
audio.

Replay

When you are in replay mode, you are not
able to select a different preset until you
return to live audio. Pressing this button
returns you to the live broadcast.

Live

Save the current song, artist, or team as a favorite. The system
alerts you when it plays again on any channel.

ALERT

Selecting this button allows you to enable and edit alerts.

Memory Presets

To set a preset, tune to the station then
press and hold one of the memory preset
buttons. The audio mutes briefly while the
system saves the station and returns once
the station is stored.

You may be able to add additional preset
pages using the settings option on the
feature bar.

SiriusXM Satellite Radio Reception Factors and Troubleshooting

Potential Reception Issues

For optimal reception performance, keep the antenna clear
of snow and ice build-up and keep luggage and other
materials as far away from the antenna as possible.

Antenna obstructions

Hills, mountains, tall buildings, bridges, tunnels, freeway
overpasses, parking garages, dense tree foliage and thunder-
storms can interfere with your reception.

Terrain

When you pass a ground-based broadcast-repeating tower,
a stronger signal may overtake a weaker one and the audio
system may mute.

Station overload

Your display may show ACQUIRING... to indicate the interfer-
ence and the audio system may mute.

Satellite radio signal
interference

401

SYNC™ 3

(If Equipped)

Troubleshooting Tips

Action

Cause

Message

No action required. This
message should disappear
shortly.

Radio requires more than two
seconds to produce audio for
the selected channel.

Acquiring Signal

If this message does not clear
shortly, or with an ignition key
cycle, your receiver may have
a fault. See an authorized
dealer for service.

There is an internal module or
system failure present.

Satellite antenna fault

SIRIUS system failure

Tune to another channel or
choose another preset.

The channel is no longer avail-
able.

Invalid Channel

Contact SiriusXM at 1-888-
539-7474 to subscribe to the
channel, or tune to another
channel.

Your subscription does not
include this channel.

Unsubscribed Channel

The signal is blocked. When
you move into an open area,
the signal should return.

The signal is lost from the Siri-
usXM satellite or SiriusXM
tower to your vehicle antenna.

Satellite acquiring
signal…

No action required. The
process may take up to three
minutes.

Update of channel program-
ming in progress.

Updating…

Contact SiriusXM at 1-888-
539-7474 to resolve subscrip-
tion issues.

Your satellite service is no
longer available.

Questions? Call 1-
888-539-7474

Use the channel guide or the
Sirius XM Settings tile to turn
off the Lock or Skip function on
that station.

All the channels in the selected
category are either skipped or
locked.

None found. Check
channel guide.

No action required.

SiriusXM has updated the
channels available for your
vehicle.

SIRIUS Subscription
updated

HD Radio™ Information (If
Available)

To activate HD radio, please see the Radio
Settings in the Settings Chapter. See

Settings

(page 418).

Note:

HD Radio broadcasts are not

available in all markets.

402

SYNC™ 3

(If Equipped)

HD Radio technology is the digital
evolution of analog AM/FM radio. Your
system has a special receiver that allows
it to receive digital broadcasts (where
available) in addition to the analog
broadcasts, it already receives. Digital
broadcasts provide a better sound quality
than analog broadcasts with free,
crystal-clear audio and no static or
distortion. For more information, and a
guide to available stations and
programming, please visit:

Website

www.hdradio.com

When HD Radio is on and you tune to a
station broadcasting HD Radio technology,
you may notice the following indicators on
your screen:

E142616

The HD logo is grey when acquiring a digital
station, and then changes to orange when
digital audio is playing. When this logo is
available, you may also see Title and Artist
fields on-screen.

The multicast indicator appears in FM
mode (only) if the current station is
broadcasting multiple digital broadcasts.
The highlighted numbers signify available
digital channels where new or different
content is available. HD1 signifies the main
programming status and is available in
analog and digital broadcasts. Other
multicast stations (HD2 through HD7) are
only available digitally.

Note:

There is also an additional feature

for stations that have more than 1 HD
multicast (For example, HD1 or HD2). The
HD logo and Radio text appears as a button.
Pressing this button allows you to cycle
through all of the HD stations on that
specific frequency. For example, if you are
on 101.1 and it has HD1, HD2, HD3, pressing
the button repeatedly causes the radio to
cycle through the HD stations in a cyclic
increasing order.

When HD Radio broadcasts are active, you can access the following functions:

Action and Description

Message

Allows you to save an active channel as a memory preset.
Touch and hold a memory preset slot until the sound returns.
There is a brief mute while the radio saves the station. Sound
returns when the channel saves. When switching to an HD2
or HD3 memory preset, the sound mutes before the digital
audio plays, because the system has to reacquire the digital
signal.

Presets

Note:

As with any station you save, you cannot access the saved station if your vehicle is

outside the station’s reception area.

403

SYNC™ 3

(If Equipped)

Ford Maverick (2022 year). Manual in english - page 24