Ford Falcon. Manual - part 332
413-01-11 Instrument
Cluster 413-01-11
DIAGNOSIS AND TESTING (Continued)
Input and Data Test
This test will check for hard wired inputs to the cluster
1. User will be prompted with items to check and
data to verify
1.
Park
Lights
2.
Park
Brake
3. Left Turn / Right Turn Switch
4.
Autolamps
2. Tests on input status will be conducted, with user
confirmation. Upon failure detected user will be
guided through further tests for that particular
failure.
This test will also check for data errors (Odometer,
Trip data, etc.)
3. User will be prompted with item to check,
verification of data and further tests to conduct will
be provided as required.
DTC Chart
Instrument Cluster Diagnostic Trouble Code (DTC) Index
Display
Description
Action
B1201
Fuel Sender Circuit Failure
Conduct Functional Test: Gauge Test
Conduct Pinpoint Test: ‘Fuel Gauge Circuit Test’
B1342
ECU is faulted / EE checksum
Internal data failure, disconnect power, wait 10
failure
seconds and re-apply power. Run self test. If DTC
is still present, Conduct Functional Test: Data
Test.
B1499
Lamp Turn Signal Left Circuit
Bulb out detected on Left Turn Circuit. Check
Failure
bulbs, then conduct Functional Test: Input and
Data Test.
Conduct Pinpoint Test: ‘Turn Signal Input Test’
B1503
Lamp Turn Signal Right Circuit
Bulb out detected on Left Turn Circuit. Check
Failure
bulbs, then conduct Functional Test: Input and
Data Test.
Conduct Pinpoint Test: ‘Turn Signal Input Test’
B1579
Dim Panel Increase Input Circuit
Dim Increase circuit failure or button stuck.
Failure
Conduct Functional Test: Button Test.
B1583
Dim Panel Decrease Input Circuit
Dim Increase circuit failure or button stuck.
Failure
Conduct Functional Test: Button Test.
B1875
Turn Signal / Hazard Switch Signal Hazard circuit failure or button stuck. Conduct
Circuit Failure
Functional Test: Button Test.
B2675
Trip reset button stuck Trip reset
Conduct Functional Test: Button Test.
circuit failure or button stuck.
B2680
Odometer Changed
Permanent DTC indicating that Odometer has
been manually reset. - No Action Required
B2681
PRND Sender Failure
Invalid PRND data detected, Conduct Functional
Test: Multifunction Output Test. Check PCM
PRND data
B2895
Trip Computer Mode Switch Circuit Trip computer circuit failure or button stuck.
Failure
Conduct Functional Test: Button Test.
G86737 en