Ford Transit Connect (2016 year). Manual - part 11

Car Finder

Press the lock button on the key twice
within three seconds. The horn sounds and
the direction indicators will flash.

Note: If locking was not successful or if any
door or the liftgate is open, or if the hood is
open on vehicles with a perimeter alarm or
remote start, the horn will sound and the
direction indicators will not flash.

REPLACING A LOST KEY OR
REMOTE CONTROL

To re-program the passive anti-theft
system see an authorized dealer.

PRINCIPLE OF OPERATION

MyKey allows you to program keys with
restricted driving modes to promote good
driving habits. All but one of the keys
programmed to the vehicle can be
activated with these restricted modes.

Any keys that have not been programmed
are referred to as administrator keys or
admin keys. They can be used to:
•

Create a MyKey.

•

Program configurable MyKey settings.

•

Clear all MyKey features.

When you have programmed a MyKey, you
can access the following information using
the information display:
•

How many admin keys and MyKeys are
programmed to your vehicle.

•

The total distance your vehicle has
traveled using a MyKey.

Note: All MyKeys are programmed to the
same settings. You cannot program them
individually.

Non-configurable Settings

The following settings cannot be changed
by an admin key user:
•

Belt-Minder or safety belt reminder.
You cannot disable this feature. The
audio system will mute when the front
seat occupants’ safety belts are not
fastened.

•

Early low fuel. The low fuel warning is
activated earlier, giving the MyKey user
more time to refuel.

•

Driver assist features, if equipped on
your vehicle, are forced on: parking aid,
blind spot information system (BLIS)
with cross traffic alert, lane departure
warning and forward collision warning
system.

•

Satellite radio adult content
restrictions (available only in some
markets).

Configurable Settings

With an admin key, you can configure
certain MyKey settings when you first
create a MyKey and before you recycle the
key or restart the vehicle. You can also
change the settings afterward with an
admin key:
•

A vehicle speed limit can be set.
Warnings will be shown in the display,
followed by an audible tone when your
vehicle reaches the set speed. You
cannot override the set speed by fully
depressing the accelerator pedal or by
setting cruise control.

WARNING

Do not set MyKey maximum speed
limit to a limit that will prevent the
driver from maintaining a safe speed

considering posted speed limits and
prevailing road conditions. The driver is
always responsible to drive in accordance
with local laws and prevailing conditions.
Failure to do so could result in accident or
injury.

•

Various vehicle speed minders can be
set. Once you select a speed, it will be
shown in the display, followed by an
audible tone when the preselected
vehicle speed is exceeded.

•

Audio system maximum volume of
45%. A message will be shown in the
display when you attempt to exceed
the limited volume. Also, the
speed-sensitive or compensated
automatic volume control will be
disabled.

•

Always on setting. When this is
selected, you will not be able to turn

off Advance Trac or traction control,
911 Assist or Emergency Assistance, or
Do Not Disturb (if your vehicle is
equipped with these features).

CREATING A MYKEY

You can program a MyKey using the
information display control on the steering
wheel.  See Information Displays (page
85).

Insert the key you want to program into the
ignition and switch the ignition on.

Press the left arrow button to access the main menu and scroll to:

Action and Description

Message

Press the OK button.

Settings

Press the OK button.

MyKey

When prompted, hold the OK button until you see a message
informing you to label this key as a MyKey. The key will be
restricted at your vehicle's next start.

Create MyKey

Make sure you label the key so you can distinguish it from the
admin keys.
You can also program configurable settings for the key(s).
Refer to the following Programming/Changing Configur-
able Settings.

Programming/Changing
Configurable Settings

Switch the ignition on using an admin key
or fob.

Use the information display to access the configurable MyKey settings, scroll to:

Action and Description

Message

Press the OK button.

Settings

Use the up and down arrow buttons to scroll to a configurable
feature.

MyKey

Press the OK or right arrow button to make a selection.

Action and Description

Message

Choose your applicable setting.

Note: You can clear or change your MyKey settings at any time during the same key cycle
as you created the MyKey. Once you switch the ignition off you will need an admin key to
change or clear your MyKey settings.

CLEARING ALL MYKEYS

You can clear or change your MyKey
settings using the information display
control on the steering wheel.  See
Information Displays (page 85).

Switch the ignition on using an admin key
or remote control.

To clear all MyKeys of all MyKey settings, press the left arrow button to access
the main menu and scroll to:

Action and Description

Message

Press the OK button.

Settings

Press the OK button.

MyKey

Press and hold the OK button until the following message
displays.

Clear MyKey

All MyKeys

Cleared

Note: When you clear your MyKeys, you remove all restrictions and return all MyKeys to
their original admin key status.