|
|
|
226
The alignment of your headlamps should be
checked if:
❑
oncoming motorists frequently signal you to
turn off your vehicle’s high beams when you
do not have the high beams on
❑
the headlamps do not seem to give you
enough light to see clearly at night
❑
the headlamp beams are pointed substantially
away from a position slightly down and to
the right
Headlamp Bulb
Your vehicle has retractable halogen headlamps.
If you need to replace a headlamp, have it done
by a Ford service technician.
High-Mount Brakelamp Bulb
To replace the bulb:
1.
Remove the two side trim liftgate panels.
2.
Remove the liftgate trim clip and the liftgate
trim.
3.
Remove the bulb from the socket by pushing
it in and turning it counterclockwise.
4.
Install the bulb by pushing straight into the
lamp socket and turning it clockwise until it
locks in place.
5.
Replace the liftgate trim and trim clip.
6.
Replace the two side trim liftgate panels.
227
High-mount brakelamp
Rear Lamp Bulbs
To replace a bulb:
1.
Remove the attaching screw and the rear
lens cover.
Removing the attaching screw and lens
228
2.
Partially remove the rear lens by pulling the
lock tabs out of the slots.
Pulling out the lock tabs
3.
Turn the socket counterclockwise to remove
it from the lens.
4.
Remove the bulb from the socket by pushing
it in and turning it counterclockwise.
229
The rear lamps
5.
Install the bulb by pushing it into the socket
and turning it clockwise.
6.
Install the socket by pushing it into its
housing and turning it clockwise. The arrow
on the socket must align with the arrow on
the housing when installed.
7.
Replace the rear lens and rear lens cover.
|
|
|