Ford Mustang (2018 year). Manual - part 24

Alarm

Action

Message

Alarm triggered due to unauthorized entry.  See Anti-Theft

Alarm (page 65).

Vehicle Alarm To Stop

Alarm, Start Vehicle.

All perimeter sensors are active.  See Anti-Theft Alarm (page

65).

Alarm All Sensors Peri-

meter Sensing

Battery and Charging System

Action

Message

The charging system needs servicing. If the warning stays on

or continues to come on, contact an authorized dealer as soon

as possible.

Check Charging System

The charging system needs servicing. If the warning stays on

or continues to come on, contact an authorized dealer as soon

as possible.

Charging System Service

Soon

The charging system needs servicing. Contact an authorized

dealer as soon as possible.

Charging System Service

Now

The battery management system determines that the battery

is at a low state of charge. Turn your ignition off as soon as

possible to protect the battery. This message clears once you

restart your vehicle and the battery state of charge has

recovered.

Battery State of Charge

Low

The battery management system detects an extended low-

voltage condition. Your vehicle disables various features to

help preserve the battery. Turn off as many of the electrical

loads as soon as possible to improve system voltage. If the

system voltage has recovered, the disabled features operate

again as normal.

Low Battery Features

Temporarily Turned Off

The battery management system determines that the battery

is at a low state of charge. Turn your ignition off as soon as

possible to protect the battery. This message clears once you

restart your vehicle and the battery state of charge has

recovered. Turning off unnecessary electrical loads allow

faster battery state-of-charge recovery.

Turn Power Off To Save

Battery

Blind Spot Information and Cross Traffic Alert System

Action

Message

A fault with the system has occurred. Contact an authorized

dealer as soon as possible.

Blindspot System Fault

The system sensors are blocked.  See Blind Spot Informa-

tion System (page 175).

Blindspot Not Available

Sensor Blocked See

Manual

The blind spot information system and cross traffic alert

system sensors are blocked.  See Blind Spot Information

System (page 175).

Cross Traffic Not Avail-

able Sensor Blocked See

Manual

A fault with the system has occurred. Contact an authorized

dealer as soon as possible.

Cross Traffic System

Fault

Collision Warning System

Action

Message

A fault with the system has occurred. Contact an authorized

dealer as soon as possible.  See Driving Aids (page 170).

Collision Warning

Malfunction

You have a blocked sensor due to bad weather, ice, mud or

water in front of the radar sensor. You can typically clean the

sensor to resolve.  See Driving Aids (page 170).

Collision Warning Not

Available Sensor

Blocked See Manual

A fault with the system has occurred. Contact an authorized

dealer as soon as possible.  See Driving Aids (page 170).

Collision Warning Not

Available

Doors and Locks

Action

Message

The door(s) listed is not completely closed.

X Door Ajar

The trunk is not completely closed.

Trunk Ajar

The hood is not completely closed.

Hood Ajar

The system has disabled the door switches.

Switches Inhibited

Security Mode

Engine

Action

Message

The engine is overheating and the power has been reduced

to assist in lowering the temperature. Stop in a safe place as

soon as it is possible.

Power Reduced to

Lower Engine Temp

Exhaust Mode

Action

Message

Displays when you switch on the Track Exhaust Mode setting.

This setting is only intended for use at tracks and should not

be used on public roadways. Use of this setting results in

increased exterior noise, which may not meet local laws and

regulations.

For Track Use See

Manual

Fuel

Action

Message

An early reminder of a low fuel condition.

Fuel Level Low

The fuel fill inlet may not be properly closed.

Check Fuel Fill Inlet

Hill Start Assist

Action

Message

Hill start assist is not available. Contact an authorized dealer.

See Hill Start Assist (page 151).

Hill Start Assist Not

Available

Keys and Intelligent Access

Action

Message

A reminder to press the brake while starting the vehicle.

To START Press Brake

A reminder to depress the clutch pedal on manual transmis-

sion while starting the vehicle.

To START Press Clutch

The system does not detect a key in your vehicle.  See Keyless

Starting (page 128).

No Key Detected

Action

Message

You pressed the start/stop button to switch off the engine

and your vehicle does not detect your intelligent access key

inside your vehicle.

Restart Now or Key is

Needed

Your vehicle is in the accessory ignition state.

Accessory Power is

Active

There is a problem with your vehicle’s starting system. See

an authorized dealer for service.

Starting System Fault

You have successfully programmed an intelligent access key

to the system.

Key Program Successful

You have failed to program an intelligent access key to the

system.

Key Program Failure

You have programmed the maximum number of keys to the

system.

Max Number of Keys

Learned

You have not programmed enough keys to the system.

Not Enough Keys

Learned

The key battery is low. Change the battery as soon as possible.

Key Battery Low Replace

Soon

Inform the driver that they are exiting the vehicle and the

engine is on.

Engine ON

Maintenance

Action

Message

Stop your vehicle as soon as safely possible and turn off the

engine. Check the oil level. If the warning stays on or continues

to come on with your engine running, contact an authorized

dealer as soon as possible.

Low Engine Oil Pressure

The engine oil life remaining is 10% or less.  See General

Maintenance Information (page 433).

Change Engine Oil Soon

The oil life left is at 0%. See General Maintenance Inform-

ation (page 433).

Oil Change Required

The brake fluid level is low, inspected the brake system

immediately.  See Brake Fluid Check (page 234).

Brake Fluid Level Low