Ford Fusion Hybrid (2014 year). Manual - part 24

Blind Spot Information and Cross Traffic Alert System

Action

Message

Displayed when a fault with the system has occurred. Contact

your authorized dealer as soon as possible.

Blindspot System Fault

Displayed when the system sensors are blocked. Contact your

authorized dealer as soon as possible.  See Blind Spot

Monitor (page 188).

Blindspot Not Available

Sensor Blocked See

Manual

Displayed when the system detects a vehicle.  See Blind Spot

Monitor (page 188).

Cross Traffic Vehicle

Coming From X

Displayed when the blind spot information system and cross

traffic alert system sensors are blocked.  See Blind Spot

Monitor (page 188).

Cross Traffic Not Avail-

able Sensor Blocked See

Manual

Displays when a fault with the system has occurred. Contact

your authorized dealer as soon as possible.

Cross Traffic System

Fault

Collision Warning System

Action

Message

Displayed when there is a system malfunction with the colli-

sion warning system. The system will be disabled. Contact

your authorized dealer as soon as possible.

Collision Warning

Malfunction

Displayed when the collision warning system radar is blocked

because of poor radar visibility due to bad weather or ice/

mud/water in front of the radar. Driver can typically clean the

sensor to resolve. Contact your authorized dealer as soon as

possible.

Collision Warning Not

Available Sensor

Blocked See Manual

Displayed when there is a system malfunction with the colli-

sion warning system. The system will be disabled. Contact

your authorized dealer as soon as possible.

Collision Warning Not

Available

99

Information Displays

Doors and Locks

Action

Message

Displays when the door(s) listed is not completely closed and

the vehicle is moving.

X Door Ajar

Displays when the door(s) listed is not completely closed.

Displays when the luggage compartment is not completely

closed.

Trunk ajar

Displays when the hood is not completely closed.

Hood ajar

Displays when the door switches have been disabled.

Switches Inhibited

Security Mode

Displayed when there is a system malfunction with the child

locks. Contact your authorized dealer as soon as possible.

Child Lock Malfunction

Service Required

Displays the factory keypad code after the keypad has been

reset.

Factory Keypad Code

XXXXX

Driver Alert

Action

Message

Stop and rest as soon as it is safe to do so.

Driver Alert Warning Rest

Now

Take a rest break soon.

Driver Alert Warning Rest

Suggested

Fuel

Action

Message

Displayed as an early reminder of a low fuel condition.

Fuel Level Low

Displayed when the fuel fill inlet may not be properly closed.

Check Fuel Fill Inlet

Hill Start Assist

Action

Message

Displays when hill start assist is not available. Contact your

authorized dealer.  See Hill Start Assist (page 163).

Hill Start Assist Not

Available

100

Information Displays

Keys and Intelligent Access

Action

Message

Displayed as a reminder to press the brake while starting the

vehicle.

Press Brake to START

Displayed if the key is not detected by the system.  See

Keyless Starting (page 134).

No Key Detected

Displayed when the StartStop button is pressed to shut off

the engine and an Intelligent Access key is not detected inside

the vehicle.

Restart Now or Key is

Needed

Displayed when the vehicle is in the run ignition state.

Run Power Active

This message is displayed when there is a problem with your

vehicle’s starting system. See your authorized dealer for

service.

Starting System Fault

Displayed as a reminder to press the brake and clutch while

starting the vehicle.

Press Brake and Clutch

to Start

Displayed as a reminder to press the clutch in while starting

the vehicle.

Press Clutch to Start

Displayed during spare key programming, when an intelligent

access key is programmed to the system.

Key Program Successful

Displayed during spare key programming, when an intelligent

access key has failed to be programmed.

Key Program Failure

Displayed during spare key programming when the maximum

number of keys have been programmed.

Max Number of Keys

Learned

Displayed during spare key programming when not enough

keys have been programmed.

Not Enough Keys

Learned

Displays when the key battery is low. Change the battery as

soon as possible.

Key Battery Low Replace

Soon

Displayed when an attempt is made to program a spare key

using two existing keys.

Could Not Program

Integrated Key

Displays to inform the driver that they are exiting the vehicle

and the engine is on.

Engine On

101

Information Displays

Lane Keeping System

Action

Message

The system has malfunctioned. Contact your authorized

dealer as soon as possible.

Lane Keeping Sys.

Malfunction Service

Required

The system has detected a condition that has caused the

system to be temporarily unavailable.

Front Camera Tempor-

arily Not Available

The system has detected a condition that requires the wind-

shield to be cleaned to operate properly.

Front Camera Low Visib-

ility Clean Screen

The system has malfunctioned. Contact your authorized

dealer as soon as possible.

Front Camera Malfunc-

tion Service Required

Displayed when the system requests the driver to keep their

hands on the steering wheel.

Keep Hands on Steering

Wheel

Maintenance

Action

Message

Stop the vehicle as soon as safely possible, turn off the engine.

Check the oil level. If the warning stays on or continues to

come on with your engine running, contact your authorized

dealer as soon as possible.

LOW Engine Oil Pressure

Displayed when the engine oil life remaining is 10% or less.

See Engine Oil Check (page 238).

Change Engine Oil Soon

Displayed when the oil life left reaches 0%. See Engine Oil

Check (page 238).

Oil Change Required

Indicates the brake fluid level is low and the brake system
should be inspected immediately. See Brake and Clutch

Fluid Check (page 242).

Brake Fluid Level LOW

Displays when the brake system needs servicing. Stop the

vehicle in a safe place. Contact your authorized dealer.

Check Brake System

Displays when the engine temperature is too high. Stop the

vehicle in a safe place and allow the engine to cool. If the

problem persists, contact your authorized dealer.  See Engine

Coolant Check (page 239).

Engine Coolant Overtem-

perature

102

Information Displays