Ford F-650/750 (2018 year). Manual - part 71

System Interaction and Feedback

The system provides feedback through
audible tones, prompts, questions and
spoken confirmations depending on the
situation and the chosen level of
interaction (voice settings). You can
customize the voice recognition system to
provide more or less instruction and
feedback.

The default setting is to a higher level of
interaction in order to help you learn to use
the system. You can change these settings
at any time.

Adjusting the Interaction Level

E142599

Initiate a voice session by
pressing the voice button on the
steering wheel controls.  See

Steering Wheel (page 46).

When prompted say the following:

If you want the system to carry out the following

Voice command

Voice Settings | Voice Preferences

Followed by either of the following:

Provide more detailed interaction and guidance.

Interaction Mode
Standard

Provide less audible interaction and more tone prompts.

Interaction Mode
Advanced

The system defaults to the standard interaction mode.

Confirmation prompts are short questions
the system asks when it is not sure of your
request or when there are multiple possible
responses to your request. For example,
the system may ask "Phone, is that
correct?". If turned off, the system simply
makes a best guess as to what you
requested and may ask you to confirm
settings.

If you want the system to carry out the following

Voice command

Make a best guess from the command; you may still occa-
sionally be asked to confirm settings.

Confirmation Prompts
Off

Clarify your voice command with a short question.

Confirmation Prompts
On

The system creates candidate lists when
it has the same confidence level of several
options based on your voice command.
When turned on, it may prompt you with
as many as four possibilities for
clarification.

For example, say "Say 1 after the tone to
call John Doe at home. Say 2 after the tone
to call Johnny Doe on mobile. Say 3 after
the tone to call Jane Doe at home." You
could also say "Say 1 after the tone to play
John Doe, Say 2 after the tone to play
Johnny Doe."

If you want the system to carry out the following

Voice command

Make a best guess from the media candidate list. You may
still occasionally be asked questions.

Media Candidate Lists
Off

Clarify your voice command for media candidates.

Media Candidate Lists On

Make a best guess from the phone candidate list. You may
still occasionally be asked questions.

Phone Candidate Lists
Off

Clarify your voice command for phone candidates.

Phone Candidate Lists
On

USING SYNC™ WITH YOUR
PHONE

Hands-free calling is one of the main
features of SYNC. While the system
supports a variety of features, many are
dependent on your cell phone's
functionality. At a minimum, most cell
phones with Bluetooth wireless technology
support the following functions:
•

Answering an incoming call.

•

Ending a call.

•

Using privacy mode.

•

Dialing a number.

•

Redialing.

•

Call waiting notification.

•

Caller ID.

Other features, such as text messaging
using Bluetooth and automatic phonebook
download, are cell phone-dependent
features. To check your cell phone's
compatibility, see your cell phone's manual
and visit www.SYNCMyRide.com,
www.SYNCMyRide.ca or
www.syncmaroute.ca.

Pairing a Cell Phone for the First
Time

Note: SYNC can support downloading up
to approximately 1000 entries per
Bluetooth-enabled cell phone.

Note: Make sure to switch on the ignition
and the radio. Put the transmission in
position park (P).

Note: To scroll through the menus, press
the up and down arrows on your audio
system.

Wirelessly pairing your cell phone with
SYNC allows you to make and receive
hands-free calls.

Press the phone button. When the display indicates there is no paired cell phone,
do the following:

Action and Description

Message

Press the OK button.

No Phone Paired

Add

1.

Press the OK button.

2. Put your cell phone into Bluetooth discovery mode. See

your device's manual if necessary.

3. When prompted on your cell phone's display, enter the

six-digit PIN provided by SYNC in the radio display. The
display indicates when the pairing is successful.

Depending on your cell phone's capability
and your market, the system may prompt
you with questions, such as setting the
current cell phone as the primary cell
phone (the cell phone SYNC automatically
tries to connect with first upon vehicle
start-up) and downloading your
phonebook.

Pairing Subsequent Cell Phones

Note: To scroll through the menus, press
the up and down arrows on your audio
system.

Note: Make sure to switch on the ignition
and the radio. Put the transmission in
position park (P).

Press the phone button and then scroll to:

Action

Message

Press the OK button.

Phone settings

Press the OK button.

Bluetooth device

Press the OK button. When the following message appears
in the display:

Add

Find SYNC

1.

Press the OK button.

2. Put your cell phone into Bluetooth discovery mode. See

your device's manual if necessary.

3. When prompted on your cell phone's display, enter the

six-digit PIN provided by SYNC in the radio display. The
display indicates when the pairing is successful.

The system then prompts with questions, such as if you would like to set the current cell
phone as the primary cell phone (the cell phone SYNC automatically tries to connect
with first upon vehicle start-up) or download your phonebook.

Phone Voice Commands

Press the voice icon and say:

Voice Commands

Phone

You can then say any of the following
commands.

Call History Incoming

Call History Missed

Call History Outgoing

Phonebook ___

Phonebook ___ at Home

Phonebook ___ at Work

Phonebook ___ in Office

Phonebook ___ on Cell

___ is a dynamic listing that should be the
name of a contact in your phonebook. For
example you could say "Call Mom".

You can also say any of the following:

Voice Command

Call ___

Call ___ at Home

Call ___ at Work

Call ___ in Office

Call ___ on Mobile

Call ___ on Other

Dial

None of these commands are available
until you completely download your cell
phone information using Bluetooth.

___ is a dynamic listing that should be the
name of a contact in your phonebook. For
example you could say "Call Mom".

The following commands are only
available during active calls:

Voice Commands

Go To Privacy

Hold

Join

Phone Menu Commands

To access the phone menu with voice
commands, press the voice button and
when prompted say:

Voice Command

[Phone] Menu

You can then say any of the following:

[Phone] Connections | [Media] Connec-
tions | [Bluetooth] Connections

[Phone] Settings [Message] Notification
On

[Phone] Settings [Message] Notification
Off

[Phone] Settings [Set] Phone Ringer

[Phone] Settings [Set] Ringer 1

[Phone] Settings [Set] Ringer 2

[Phone] Settings [Set] Ringer 3

[Phone] Settings [Set] Ringer Off

Battery

Phone Name

Signal