Content .. 35 36 37 38 ..

Ford Expedition (2018 year). Manual - part 37

E142554

Saving a PreSet Position

Switch the ignition on.

2. Adjust the memory features to your

desired position.

3. Press and hold the desired preset

button until you hear a single tone.

You can save up to three preset memory
positions. You can save a memory preset
at any time.

Recalling a PreSet Position

Press and release the preset button
associated with your desired driving
position. The memory features move to
the position stored for that preset.

Note:

You can only recall a preset memory

position when the ignition is off, or when the
transmission is in park (P) or neutral (N) if
the ignition is on.

You can also recall a preset memory
position by:
•

Pressing the unlock button on your
intelligent access key fob if it is linked
to a preset position.

•

Unlocking the intelligent driver door
handle if a linked key fob is present.

Note:

Using a linked key fob to recall your

memory position when the ignition is off
moves the seat to the Easy Entry position.

Note:

Pressing any active memory feature

adjustment control (or any memory button)
during a memory recall cancels the
operation.

Linking a PreSet Position to your
Remote Control or Intelligent
Access Key Fob

Your vehicle can save the preset memory
positions for up to three remote controls
or intelligent access (IA) keys.

With the ignition on, move the memory
positions to the desired positions.

2. Press and hold the desired preset

button for about five seconds. A tone
sounds after about two seconds.
Continue holding until you hear a
second tone.

3. Within three seconds, press the lock

button on the remote control you are
linking.

To unlink a remote control, follow the
same procedure – except in step 3, press
the unlock button on the remote control.

Note:

If more than one linked remote

control or intelligent access key is in range,
the memory function moves to the settings
of the first key to recall a memory position.

Easy Entry and Exit Feature

If you enable the easy entry and exit
feature, it automatically moves the driver
seat position rearward up to 2 in (5 cm)
when you switch the ignition off.

The driver seat returns to the previous
position when you switch the ignition on.
You can enable or disable this feature
through the information display. See
General Information

(page 109).

REAR SEATS

Folding the Second Row 40% Seat

WARNING

Do not place cargo or any objects
behind the seat backrest before
returning it to the original position.

Pull on the seat backrest to make sure that
it has fully latched after returning the seat
backrest to its original position. An
unlatched seat may become dangerous if
you stop suddenly or have a crash.

E246710

Locate the handle on the side of the
seat cushion by the door.

2. Pull up on the handle to fold the seat

backrest. To increase cargo space, the
seat backrest also moves forward and
the seat cushion moves forward and
down.

Note:

Use caution when folding the seat

backrest to the flat position as the seat
moves forward when you lift the release
handle.

To return the seat to the upright position:

E246709

Lift the seat backrest toward the rear
of the vehicle.

2. Rotate the seat backrest until you hear

a click, locking it in the upright position.

Adjusting the Second Row
Outboard 40% Seat for Easy Entry

WARNINGS

Do not drive your vehicle with a seat
that is unlatched or in the folded
position. Failure to follow this

instruction could result in personal injury
or death in the event of a sudden stop or
crash.

Check under the seat cushion to
make sure no cargo or objects are
under the seat cushion before

returning the seat cushion to its original
position, and that the seat cushion locks
into place. Failure to do so may prevent
the seat from operating properly in the
event of a crash, which could increase the
risk of serious injury.

Do not place cargo or any objects
behind the seat backrest before
returning it to the original position.

Note:

You can move the outboard seats

forward to allow access to the third row
seats.

This feature allows for easier entry and exit
to and from the third row seat.

E257686

Pull the lever.

2. Tilt the seat and slide the complete

seat forward.

E246708

3. When exiting your vehicle from the

third row seats, pull the lever up on the
upper corner of the outboard seats.

4. To return the seat to the seating

position, slide the seat rearward while
pulling down on the seat backrest until
the latch fully engages.

5. To move the seat further back, pull the

lever under the front of the seat and
slide it backward.

Note:

You must move the seat to the full

forward position before you move it
rearward. Otherwise, the seat may not slide
properly rearward.

Note:

You can slide the outboard seats

forward when using a child restraint.

Power Easy Entry

(If Equipped)

WARNINGS

Do not drive your vehicle with a seat
that is unlatched or in the folded
position. Failure to follow this

instruction could result in personal injury
or death in the event of a sudden stop or
crash.

Check under the seat cushion to
make sure no cargo or objects are
under the seat cushion before

Do not place cargo or any objects
behind the seat backrest before
returning it to the original position.

The easy entry seat allows for easier entry
and exit to and from the third row seat.

E247495

Press the button on the rear quarter
trim panel to unlock the rear of the
seat.

2. Push the seat forward to gain access

to the third row seat.

Reclining the Second Row
Outboard 40% Seat Backrest

WARNING

Reclining the seatback can cause an
occupant to slide under the seat's
seatbelt, resulting in severe personal

injuries in the event of a crash.

E247681

The release handle is on the outboard side
of the seat cushion. Lift it to adjust the seat
backrest to your desired position.

Content .. 35 36 37 38 ..