Ford Expedition (2018 year). Manual - part 30

Action

Message

The system automatically turns off and displays this message

when you connect a trailer to the vehicle that does not have

a trailer blind spot system or when you switch the trailer blind

spot system off through the information display. See Blind

Spot Information System

 (page 240).

Cross Traffic Alert Deac-

tivated Trailer Attached

The system automatically turns off and displays this message

when you connect a trailer to the vehicle that does not have

a trailer blind spot system or when you switch the trailer blind

spot system off through the information display.  See Blind

Spot Information System

 (page 240).

Blind Spot Alert Deactiv-

ated Trailer Attached

Displays when the trailer connected is a fifth wheel or goose-

neck, or when the trailer width is wider than 10 ft (2.7 m) or

longer than 33 ft (10 m).

Trailer Blind Spot Not

available Due to Invalid

Trailer

Collision Warning System

Action

Message

A fault with the system has occurred. Contact an authorized

dealer as soon as possible.

Collision Warning

Malfunction

You have a blocked sensor due to bad weather, ice, mud or

water in front of the radar sensor. You can typically clean the

sensor to resolve.

Collision Warning Not

Available Sensor

Blocked See Manual

A fault with the system has occurred. Contact an authorized

dealer as soon as possible.

Collision Warning Not

Available

Doors and Locks

Action

Message

The door(s) listed is not completely closed.

X Door Ajar

Driver Alert

Action

Message

Stop and rest as soon as it is safe to do so.

Driver Alert Warning Rest

Now

Take a rest soon.

Driver Alert Warning Rest

Suggested

Drivetrain

Action

Message

Displays if the electronic limited slip differential system

encounters a hardware failure. Have your vehicle checked as

soon as possible.

Check Electronic Limited

Slip Differential

Displays if an electronic limited slip differential system fault

is present. Have your vehicle checked as soon as possible.

Electronic Limited Slip

Differential Off See

Owner's Manual

Displays when the electronic limited slip differential system

resumes normal function.

Electronic Limited Slip

Differential Restored to

Normal

Displays if the electronic limited slip differential system

temporarily turns off due to overheating or an undersized

spare tire. If an undersized spare tire is installed, replace the

spare tire with a full-sized tire as soon as possible. If not, stop

the vehicle in a safe location and allow the system to cool.

Electronic Limited Slip

Differential Temporarily

Disabled

Displays if the electronic limited slip differential has limited

functionality. This could be due to an undersized spare tire

or caused by the system overheating. If an undersized spare
tire is installed, replace the spare tire with a full-sized tire as

soon as possible. If an undersized spare tire is not installed,

the vehicle has reduced functionality. Have your vehicle

checked as soon as possible.

Electronic Limited Slip

Differential Reduced

Torque

Action

Message

Displays when you select a drive mode that does not allow

the electronic limited slip differential to turn on. This may

also display when the electronic limited slip differential has

a fault and the vehicle requests the locking feature.

Electronic Limited Slip

Differential Locking

Feature Not Available

The transfer case is in the neutral position. This message

indicates that your vehicle is safe to be towed with all four

wheels on the ground.

Neutral Tow Enabled

Leave Transmission in

Neutral

The transfer case is NOT in the neutral position. This message

indicates that your vehicle is NOT safe to be towed with all

four wheels on the ground.

Neutral Tow Disabled

Engine

Action

Message

The engine has reduced power to help reduce high

engine temperature.

Power Reduced to Lower Engine

Temp

Four-Wheel Drive

Action

Message

A 4X4 system fault is present. Contact an authorized

dealer as soon as possible.

Check 4x4

The 4X4 system is making a shift.

4x4 Shift in Progress

Displays when you attempt to switch to 4X4 LOW and

you do not shift the transmission to neutral (N).

For 4x4 LOW Shift to N

Displays when you attempt to switch to 4X4 LOW and

your vehicle's speed is greater than 3 mph (5 km/h).

For 4x4 LOW Slow to 3 MPH

Displays when you attempt to switch from 4X4 LOW

and you do not shift the transmission to neutral (N).

To Exit 4x4 LOW Shift to N

Displays when you attempt to switch from 4X4 LOW

and your vehicle's speed is greater than 3 mph

(5 km/h).

To Exit 4x4 LOW Slow to 3 MPH

May display when there is a transfer case gear tooth

blockage while shifting to or from 4L or to the neutral

state.

Shift Delayed Pull Forward

Action

Message

Displays when the system turns off the clutch due to

excessive stress. The system automatically turns on

the clutch after it cools.

4x4 Temporarily Disabled

Displays when the 4X4 system has been restored to

its original setting.

4x4 Restored

Displays when the 4X4 system temporarily turns on

4H from 4A after detecting driving conditions that

require greater 4X4 performance. The system automat-
ically returns to 4A after the system no longer detects

these driving conditions.

4x4 Temporarily Locked

Fuel

Action

Message

An early reminder of a low fuel condition.

Fuel Level Low

The fuel fill inlet may not be properly closed.

Check Fuel Fill Inlet

Keys and Intelligent Access

Action

Message

A reminder to press the brake while starting the vehicle.

To START Press Brake

The system does not detect a key in your vehicle.  See Keyless

Starting

 (page 168).

No Key Detected

You pressed the StartStop button to switch off the engine

and your vehicle does not detect your intelligent access key

inside your vehicle.

Restart Now or Key is

Needed

Your vehicle is in the run ignition state.

Full Accessory Power

Active

There is a problem with your vehicle’s starting system. See

an authorized dealer for service.

Starting System Fault

You have successfully programmed an intelligent access key

to the system.

Key Program Successful

You have failed to program an intelligent access key to the

system.

Key Program Failure