|
|
|
1. Turn the ignition switch to the ON position. DO NOT START THE 2. Wait until the safety belt warning light turns off (Approximately one warning light turns off. 3. Buckle then unbuckle the safety belt three times at a moderate speed, on for three seconds. • Belt-Minder威 will automatically exit programming mode without changing its enable status if Step 4 does not occur within 10 seconds 4. Within approximately seven seconds of the light turning off, buckle is currently enabled. As confirmation, the safety belt warning light will • This will enable the Belt-Minder威 feature for that seating position if it is currently disabled. As confirmation, the safety belt warning light will 5. After receiving confirmation, the deactivation/activation procedure is Safety belt extension assembly If the safety belt is too short when fully extended, a safety belt extension Use only extensions manufactured by the same supplier as the safety Use the shortest extender assembly that will provide adequate fit. WARNING: Do not use extensions to change the fit of the Seating and Safety Restraints 105 |