|
|
|
38
R
WARNING
Carefully follow all of the manufacturer’s
instructions included with the safety seat you
put in your vehicle. If you do not install and
use the safety seat properly, the child may be
injured in a sudden stop or collision.
R
WARNING
Seatbacks should be upright for use with
child safety seats.
R
WARNING
Always keep the buckle release button
pointing upward and away from the child
seat, with the tongue between the child
seat and the release button as shown in
the following illustration.
39
Installing Child Safety Seats
Your vehicle is equipped with a dual locking
mode retractor on the shoulder belt portion of
the combination lap/shoulder safety belt for the
front seat passenger and locking “cinch tongue”
for rear outboard passengers.
If you choose to install a forward-facing child
safety seat in the front seating positions, move
vehicle seat as far back as possible.
For front passenger seating positions equipped
with a dual-locking mode retractor, use the
following procedure:
For rear outboard seating positions, refer to
cinch tongue procedure.
1.
Position the child seat in the center of the
passenger seat.
40
2.
Pull down on shoulder belt, then grasp
shoulder belt and lap belt together. Figure 1.
41
3.
While holding the shoulder and lap belt
portions together, route the tongue through
the child seat according to the child seat
manufacturer’s instructions. See Figure 2. Be
sure that the belt webbing is not twisted.
Routing the lap/shoulder belt
|
|
|