Lincoln Nautilus (2022 year). Manual in english - page 9

PERSONALIZED SETTINGS

CHANGING THE INSTRUMENT CLUSTER DISPLAY LANGUAGE

Action

Menu Item

Press the OK button.

Display

Press the OK button.

Display Setup

Press the OK button.  Select a language.

Language

Note: Available languages vary by region.

CHANGING THE MEASUREMENT UNIT

Action

Menu Item

Press the OK button.

Display

Press the OK button.

Display Setup

Press the OK button.  Select a measure unit.

Distance

150

Instrument Cluster Display

CHANGING THE TEMPERATURE UNIT

Action

Menu Item

Press the OK button.

Display

Press the OK button.

Display Setup

Press the OK button.  Select a temperature unit.

Temperature

151

Instrument Cluster Display

CHANGING THE TIRE PRESSURE UNIT

Action

Menu Item

Press the OK button.

Display

Press the OK button.

Display Setup

Press the OK button.  Select a pressure unit.

Tire Pressure

152

Instrument Cluster Display

WHAT IS REMOTE START

The system allows you to remotely start your
vehicle and to adjust the interior temperature
according to the settings that you chose.

REMOTE START PRECAUTIONS

WARNING: Do not start the engine

in a closed garage or in other enclosed
areas. Exhaust fumes are toxic. Always
open the garage door before you start the
engine. Failure to follow this instruction
could result in personal injury or death.

REMOTE START LIMITATIONS

Remote start does not work under the
following conditions:

•

The alarm horn is sounding.

•

The hood is open.

•

The transmission is not in park (P).

•

The ignition is on.

•

The battery voltage is below the
minimum operating voltage.

Note: Do not use remote start if your fuel
level is low.

Note: To use remote start with Lincoln Way
or Phone as a Key, enable the modem. See
Connecting the Vehicle to a Wi-Fi Network
(page 423).

ENABLING REMOTE START

1. Using the instrument cluster display

controls on the steering wheel, select
Settings.

2. Select Vehicle.

3. Select Remote Start.

4. Switch System on.

Note: To use remote start, make sure that
the modem is enabled.  See Enabling and
Disabling the Modem (page 423).

REMOTELY STARTING AND
STOPPING THE VEHICLE

Remotely Starting the Vehicle

E138623

Press the button on the remote
control.

E138625

Within three seconds, press the
button on the remote control.

Within three seconds, press the

button again.

Note: You can also use the Lincoln Way App
to start the vehicle.

Note: The direction indicators flash twice.

Note: The parking lamps turn on when the
vehicle is running.

Note: The horn sounds if the system fails to
start.

Note: All other vehicle systems remain off
when you have remotely started the vehicle.

Note: The vehicle remains secured when
you have remotely started the vehicle. A
valid key must be inside your vehicle to
switch the ignition on and drive your vehicle.

153

Remote Start

Remotely Stopping the Vehicle

E138625

Within three seconds, press the
button on the remote control.

Within three seconds, press the

button again.

EXTENDING THE REMOTE START
DURATION

To extend the remote start duration during
remote start, do the following:

E138623

Press the button on the remote
control.

E138625

Within three seconds, press the
button on the remote control.

Within three seconds, press the

button again.

If the duration is set to 15 minutes, the
duration extends by another 15 minutes. This
provides a total of 30 minutes.

Note: Remote start can only be extended
once.

Note: A maximum of two remote starts, or
one remote start with an extension, are
allowed. To reset the restart procedure
switch the vehicle to on, then to off.

REMOTE START REMOTE
CONTROL INDICATORS

Remote Control Feedback 

 (If Equipped)

An LED on the remote control provides status
feedback of remote start or stop commands.

Status

LED

Remote start

successful.

Solid green.

Remote stop

successful.

Solid red.

Request failed or

status not received.

Blinking red.

Status incomplete.

Blinking green.

REMOTE START SETTINGS

SWITCHING CLIMATE CONTROL LAST
SETTINGS ON AND OFF

1. Using the instrument cluster display

controls on the steering wheel, select
Settings.

2. Select Vehicle.

3. Select Remote Start Setup.

4. Select Climate Control.

5. Select Auto or Last settings.

Note: If you switch the last settings on, the
system remembers the last used settings.

SWITCHING THE HEATED SEAT
SETTINGS ON AND OFF

1. Using the instrument cluster display

controls on the steering wheel, select
Settings.

2. Select Vehicle.

3. Select Remote Start.

4. Select Seats.

154

Remote Start

5. Select Auto or Off.

Note: If you switch the heated seat settings
on, the heated seats turn on during cold
weather.

Note: You cannot adjust the heated seat
settings when you have remotely started the
engine.

SWITCHING THE HEATED STEERING
WHEEL SETTINGS ON AND OFF

1. Using the instrument cluster display

controls on the steering wheel, select
Settings.

2. Select Vehicle.

3. Select Remote Start.

4. Select Seats and Wheel.

5. Select Auto or Off.

Note: If you switch the heated steering wheel
settings on, the heated steering wheel turns
on during cold weather.

Note: You cannot adjust the heated steering
wheel settings when you have remotely
started the engine.

SETTING THE REMOTE START
DURATION

You can set a duration for the engine to run.

Note: Wait a few seconds before remotely
starting the engine after the engine stops
running.

1. Using the instrument cluster display

controls on the steering wheel, select
Settings.

2. Select Vehicle.

3. Select Remote Start.

4. Select Duration.

155

Remote Start

IDENTIFYING THE CLIMATE
CONTROL UNIT

E287616

Depending on your vehicle options, the
controls could look different than what you
see here.

SWITCHING CLIMATE CONTROL
ON AND OFF

Press the button.

SWITCHING RECIRCULATED AIR
ON AND OFF

Press the button to recirculate air
currently in the passenger
compartment.

Note: Recirculated air may turn off
automatically, or prevent you from switching
on in all air flow modes except MAX A/C to
reduce the risk of fogging. Recirculation may
also turn on and off automatically in various
air distribution control combinations to
improve heating or cooling efficiency.

SWITCHING AIR CONDITIONING
ON AND OFF

Press the button.

Note: Under certain conditions, the air
conditioning compressor could continue to
operate after you switch air conditioning off.

Note: To keep the system and its
components fully functional, switch air
conditioning on and let your vehicle idle at
least once per month for a minimum of two
minutes.

SWITCHING MAXIMUM DEFROST
ON AND OFF

Press the button.

Note: When you switch maximum defrost on,
the heated windshield, heated rear window
and air conditioning turn on. The blower
motor is set to the highest speed.

Note: When you switch maximum defrost off,
the heated windshield and heated rear
window remain on.

SWITCHING MAXIMUM COOLING
ON AND OFF

Press the button.

156

Climate Control

Note: When you switch maximum cooling
off, air conditioning remains on.

SWITCHING THE HEATED REAR
WINDOW ON AND OFF

Press the button to clear the rear
window of thin ice and fog. The
heated rear window turns off after

a short period of time.

Note: Do not use harsh chemicals, razor
blades or other sharp objects to clean or
remove decals from the inside of the heated
rear window as this could cause damage to
the heated rear window grid lines not
covered by the vehicle warranty.

Note: Make sure the engine is on before
operating the heated windows.

SETTING THE BLOWER MOTOR
SPEED

Turn the control to adjust the
volume of air circulated in the
vehicle.

SWITCHING THE HEATED
MIRRORS ON AND OFF

When you switch the heated rear window
on, the heated exterior mirrors turn on.

Note: Do not remove ice from the mirrors
with a scraper or adjust the mirror glass
when it is frozen in place.

Note: Do not clean the mirror housing or
glass with harsh abrasives, fuel or other
petroleum-based cleaning products. The
vehicle warranty may not cover damage
caused to the mirror housing or glass.

SETTING THE TEMPERATURE

E266187

E266186

Press the toggle button on the left-hand side
of the climate control upward or downward
to set the left-hand temperature.

Note: This control also adjusts the right-hand
side temperature when you switch off dual
zone mode.

Press the toggle button on the right-hand
side of the climate control upward or
downward to set the right-hand temperature.

DIRECTING THE FLOW OF AIR

Directing Air to the Windshield Air
Vents

E265283

Press the button to activate the
selection screen.

Press the button on the
touchscreen.

Directing Air to the Instrument Panel
Air Vents

E265283

Press the button to activate the
selection screen.

E244097

Press the button on the
touchscreen.

157

Climate Control

Directing Air to the Footwell Air Vents

E265283

Press the button to activate the
selection screen.

Press the button on the
touchscreen.

AUTO MODE

SWITCHING AUTO MODE ON AND
OFF

Press the button to switch auto
mode on. Repeatedly press the
button to adjust auto mode.

The system adjusts the blower motor speed,
air distribution, air conditioning operation,
and outside or recirculated air to reach and
maintain the temperature you have set.

Adjust the blower motor control to switch
auto mode off.

Note: The system starts at the previous
setting when you switch on auto mode.

AUTO MODE INDICATORS

The indicators are on the Auto Mode button.

Description

Auto Mode Indicator Status

The blower motor speed is reduced. Use this setting to minimize the amount of noise from the
blower motor. This setting increases the time taken to cool the interior.

One indicator illuminated.

The blower motor speed is moderate.

Two indicators illuminated.

The blower motor speed is increased. Use this setting to reduce the time taken to cool the interior.
This setting increases the amount of noise from the blower motor.

Three indicators illuminated.

158

Climate Control

CLIMATE CONTROL –
TROUBLESHOOTING

CLIMATE CONTROL – FREQUENTLY
ASKED QUESTIONS

Why is the volume of air to the rear
passenger compartment limited ?

Objects may obstruct the air direction
to the rear passenger compartment.
Make sure objects have not been
placed under the front seats.

Why is the volume of air from the air vents
reduced?

The air intake area at the base of the
windshield could be obstructed. Make
sure the air intake area is free from any
snow, ice or leaves.

What are the recommended settings for
heating the interior?

Auto mode on and instrument panel and
side air vents fully open.

How can I quickly heat the interior?

Select the highest blower motor speed,
highest temperature and direct the air
to the footwell air vents.

What are the recommended settings for
cooling the interior?

Auto mode on.

How can I quickly cool the interior?

Switch maximum cooling on, switch
recirculated air on and drive with the
windows open until you feel cold air
through the air vents.

How can I reduce the humidity build-up
inside my vehicle?

Do not drive with the system off or with
recirculated air on.

How can I defog the side windows?

Switch maximum defrost on.

How can I defog or clear the windshield of
thin ice?

Switch maximum defrost on.

Why do I feel air from the footwell air vents
regardless of the air distribution?

This is normal operation. You may feel
a small amount of air from the footwell
air vents regardless of the air
distribution.

What happens if I switch auto mode on
when the outside temperature and
in-vehicle temperature is high?

The system temporarily selects
recirculated air to maximize cooling.

What happens if I switch auto mode on
when the outside temperature is low and
the engine is cold?

Air is directed to the windshield and the
outer instrument panel air vents.

159

Climate Control

WHAT IS THE CABIN AIR FILTER

The cabin air filter improves the quality of air
in your vehicle by trapping dust, pollen and
other particles.

REPLACING THE CABIN AIR FILTER

Replace the filter at regular intervals.   See
Scheduled Maintenance (page 463).

The cabin air filter is behind the glove
compartment.

To remove the lower glove compartment and
access the filter:

1. Open the glove compartment.

E311296

2. Press the tab on each side.

3. Fully lower the glove compartment.

4. Pull the glove compartment toward you.

160

Interior Air Quality

FRONT SEAT PRECAUTIONS

WARNING: Sitting improperly, out of

position or with the seatback reclined too
far can take weight off the seat cushion
and affect the decision of the passenger
sensing system, resulting in serious injury
or death in the event of a crash. Always sit
upright against your seat back, with your
feet on the floor.

WARNING: Do not recline the seat

backrest too far as this can cause the
occupant to slide under the seatbelt,
resulting in personal injury in the event of
a crash.

WARNING: Do not place objects

higher than the top of the seat backrest.
Failure to follow this instruction could result
in personal injury or death in the event of
a sudden stop or crash.

WARNING: Do not adjust the driver

seat or seat backrest when your vehicle is
moving. This may result in sudden seat
movement, causing the loss of control of
your vehicle.

SITTING IN THE CORRECT
POSITION

E68595

When you use them properly, the seat, head
restraint, seatbelt and airbags will provide
optimum protection in the event of a crash.

We recommend that you follow these
guidelines:
•

Sit in an upright position with the base of
your spine as far back as possible.

•

Do not recline the seat backrest so that
your torso is more than 30 degrees from
the upright position.

•

Adjust the head restraint so that the top
of it is level with the top of your head and
as far forward as possible. Make sure that
you remain comfortable.

•

Keep sufficient distance between
yourself and the steering wheel. We
recommend a minimum of 10 in (25 cm)
between your breastbone and the airbag
cover.

•

Hold the steering wheel with your arms
slightly bent.

161

Front Seats

•

Bend your legs slightly so that you can
press the pedals fully.

•

Position the shoulder strap of the seatbelt
over the center of your shoulder and
position the lap strap tightly across your
hips.

Make sure that your driving position is
comfortable and that you can maintain full
control of your vehicle.

POWER SEATS

HEAD RESTRAINT COMPONENTS

E138642

The head restraints consist of:

An energy absorbing head
restraint.

A

Two steel stems.

B

Guide sleeve adjust and unlock
button.

C

Guide sleeve unlock and remove
button.

D

ADJUSTING THE HEAD RESTRAINT

WARNING: Fully adjust the head

restraint before you sit in or operate your
vehicle. This will help minimize the risk of
neck injury in the event of a crash. Do not
adjust the head restraint when your vehicle
is moving.

WARNING: The head restraint is a

safety device. Whenever possible it should
be installed and properly adjusted when
the seat is occupied. Failure to adjust the
head restraint properly could reduce its
effectiveness during certain impacts.

WARNING: Adjust the head restraints

for all passengers before you drive your
vehicle. This will help minimize the risk of
neck injury in the event of a crash. Do not
adjust the head restraints when your
vehicle is moving.

Note: Adjust the seat backrest to an upright
driving position before adjusting the head
restraint. Adjust the head restraint so that
the top of it is level with the top of your head
and as far forward as possible. Make sure
that you remain comfortable. If you are
extremely tall, adjust the head restraint to
its highest position.

Pull the head restraint up to raise it.

To lower the head restraint:

1. Press and hold the adjust and unlock

button.

2. Push the head restraint down.

162

Front Seats

REMOVING THE HEAD RESTRAINT

1. Pull up the head restraint until it reaches

its highest position.

2. Press and hold the adjust and unlock

button, and the unlock and remove
button.

3. Pull up the head restraint.

Note: You cannot remove front seat head
restraints that have entertainment system
video screens.

INSTALLING THE HEAD RESTRAINT

Align the steel stems into the guide sleeves
and push the head restraint down until it
locks.

Adjusting the Power Head Restraint

 (If

Equipped)

E196925

MOVING THE SEAT BACKWARD AND
FORWARD

E308339

163

Front Seats

ADJUSTING THE SEAT CUSHION

 (If

Equipped)

E308336

Adjusting the Length of the Seat
Cushion

 (If Equipped)

E196924

ADJUSTING THE SEAT BACKREST

WARNING: Do not place cargo or

any objects behind the seatback before
returning it to the original position.

E308338

Adjusting the Upper Seat Backrest and
Head Restraint 

 (If Equipped)

E200950

164

Front Seats

ADJUSTING THE SEAT HEIGHT

E308337

ADJUSTING THE LUMBAR SUPPORT

E298774

MASSAGE SEATS

MASSAGE SEAT LIMITATIONS

The engine must be running or the vehicle
must be in accessory mode to activate the
seats.

Allow a few seconds for any selection to
activate. When the seat backrest and cushion
are both active, the massage alternates
between zones.

ADJUSTING THE MASSAGE SEAT
SETTINGS

E156301

Select the previous massage
pattern or lumbar area.

A

Decrease the massage or lumbar
Intensity.

B

Select the next massage pattern
or lumbar area.

C

Increase the massage or lumbar
Intensity.

D

Select the massage or lumbar
mode.

E

165

Front Seats