Dodge Grand Caravan (2019 year). Manual

To set the password, activate the DVD Setup Menu and
follow these additional instructions:
• Using the remote control Left and Right cursor buttons,

select the Rating tab.

• Highlight ⬙Change Password⬙, and then push the remote

control’s ENTER/OK button.

• Enter the current password. Select a digit, use the remote

control Up and Down cursor buttons to set the value for
the current digit, and then push the remote control’s
Right cursor button to select the next digit. Repeat this
digit selection sequence for all four digits.

• After the four-digit password is entered, push the re-

mote control’s ENTER/OK button. If the password is
correct, the set password screen is displayed.

• Using the remote control’s Up and Down cursor buttons

to set the value for the current digit and the remote
control’s Right cursor button to select digits, enter the
new password.

• After the four-digit password is entered, push the re-

mote control’s ENTER/OK button to accept the change.

To set the rating, activate the DVD Setup Menu and follow
these additional instructions:
• Using the remote control’s Left and Right cursor but-

tons, select the Rating tab.

• Highlight ⬙Change Rating⬙, and then push the remote

control’s ENTER/OK button.

DVD Player Level Menu

MULTIMEDIA

429

• Enter the current password. Select a digit, use the remote

control’s Up and Down cursor buttons to set the value
for the current digit, and then push the remote control’s
Right cursor button to select the next digit. Repeat this
digit selection sequence for all four digits.

• After the four-digit password is entered, push the re-

mote control’s ENTER/OK button. If the password is
correct, the Rating Level menu is displayed.

• Using the remote control’s Up and Down cursor buttons,

select the new rating level, and then push the remote
control’s ENTER/OK button to accept the change.

Product Agreement

Software

This product contains software licensed under GNU Gen-
eral Public License (GPL) or GNU Lesser General Public
License (LGPL), etc. You have the right of acquisition,
modification, and distribution of the source code of the
GPL/LGPL software. You may download Source Code
from the following website at no charge.

http://www.embedded-carmultimedia.jp/linux/oss/
download/MP_632_34W821

The website provides the Source Code

⬙As Is⬙ and without

warranty of any kind. By downloading Source Code, you
expressly assume all risk and liability associated with
downloading and using the Source Code and complying
with the user agreements that accompany each Source
Code. Please note that we cannot respond to any inquiries
regarding the source code.
• THIS PRODUCT IS LICENSED UNDER THE AVC PAT-

ENT PORTFOLIO LICENSE FOR THE PERSONAL
AND NON-COMMERCIAL USE OF A CONSUMER TO
(i) ENCODE VIDEO IN COMPLIANCE WITH THE
AVC STANDARD (

⬙AVC VIDEO⬙) AND/OR (ii) DE-

CODE AVC VIDEO THAT WAS ENCODED BY A CON-
SUMER ENGAGED IN A PERSONAL AND NON-
COMMERCIAL ACTIVITY AND/OR WAS OBTAINED
FROM A VIDEO PROVIDER LICENSED TO PROVIDE
AVC VIDEO. NO LICENSE IS GRANTED OR SHALL
BE IMPLIED FOR ANY OTHER USE. ADDITIONAL
INFORMATION MAY BE OBTAINED FROM MPEG
LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM.

430

MULTIMEDIA

• THIS PRODUCT IS LICENSED UNDER THE VC-1

PATENT PORTFOLIO LICENSE FOR THE PERSONAL
AND NON-COMMERCIAL USE OF A CONSUMER TO
(i) ENCODE VIDEO IN COMPLIANCE WITH THE
VC-1 STANDARD (

⬙VC-1 VIDEO⬙) AND/OR (ii) DE-

CODE VC-1 VIDEO THAT WAS ENCODED BY A
CONSUMER ENGAGED IN A PERSONAL AND NON-
COMMERCIAL ACTIVITY AND/OR WAS OBTAINED
FROM A VIDEO PROVIDER LICENSED TO PROVIDE
VC-1 VIDEO. NO LICENSE IS GRANTED OR SHALL
BE IMPLIED FOR ANY OTHER USE. ADDITIONAL
INFORMATION MAY BE OBTAINED FROM MPEG
LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM.

Patents

Cinavia Notice

This product uses Cinavia technology to limit the use of
unauthorized copies of some commercially-produced film
and videos and their soundtracks. When a prohibited use
of an unauthorized copy is detected, a message will be
displayed and playback or copying will be interrupted.
More information about Cinavia technology is provided at
the Cinavia Online Consumer Information Center at
http://www.cinavia.com. To request additional informa-
tion about Cinavia by mail, send a postcard with your

mailing address to: Cinavia Consumer Information Center,
P.O. Box 86851, San Diego, CA, 92138, USA.

This product incorporates proprietary technology under
license from Verance Corporation and is protected by U.S.
Patent 7,369,677 and other U.S. and worldwide patents
issued and pending as well as copyright and trade secret
protection for certain aspects of such technology. Cinavia is
a trademark of Verance Corporation. Copyright 2004-2010
Verance Corporation. All rights reserved by Verance. Re-
verse engineering or disassembly is prohibited.
• This product incorporates copyright protection technol-

ogy that is protected by U.S. patents and other intellec-
tual property rights. Use of this copyright protection
technology must be authorized by Macrovision, and is
intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.

• Manufactured under license under U.S. Patent #’s:

5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 &
other U.S. and worldwide patents issued & pending.
DTS is a registered trademark and the DTS logos,
Symbol and DTS 2.0 Channel are trademarks of DTS,
Inc. © 1996-2007 DTS, Inc. All Rights Reserved.

MULTIMEDIA

431

• Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of
Dolby Laboratories.

ABOUT DIVX VIDEO: DivX is a digital video format
created by DivX, LLC, a subsidiary of Rovi Corporation.
This is an official DivX Certified device that plays DivX
video. Visit divx.com for more information and software
tools to convert your files into DivX videos.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified
device must be registered in order to play purchased DivX
Video-on-Demand (VOD) movies. To obtain your registra-
tion code, locate the DivX VOD section in your device
setup menu. Go to vod.divx.com for more information on
how to complete your registration.

DivX, DivX Certified and associated logos are trademarks
of Rovi Corporation or its subsidiaries and are used under
license.

Trademark
• Java is a registered trademark of Oracle and/or its

affiliates.

CAUTION!

Use of controls or adjustments or performance of
procedures other than those specified herein may re-
sult in hazardous radiation exposure.

UCONNECT PHONE — IF EQUIPPED

Uconnect Phone is a voice-activated, hands-free, in-vehicle
communications system. Uconnect Phone allows you to
dial a phone number with your mobile phone* using
simple voice commands (e.g., “Call”

ѧ “Mike” ѧ “Work” or

“Dial”

ѧ “248-555-1212”). Your mobile phone’s audio is

transmitted through your vehicle’s audio system; the sys-
tem automatically mutes your radio when using the
Uconnect Phone.

432

MULTIMEDIA

NOTE:

The Uconnect Phone requires a mobile phone

equipped with the Bluetooth “Hands-Free Profile,” Version
0.96 or higher. See the Uconnect website for supported
phones. For Uconnect customer support:
• U.S. residents - visit UconnectPhone.com or call 1-877-

855-8400 (24 hours a day 7 days a week).

• Canadian Residents - visit UconnectPhone.com or call

1-800-465-2001 (English) or 1-800-387-9983 (French).

• Mon. – Fri., 8:00 am – 8:00 pm, ET

• Sat., 9:00 am – 5:00 pm, ET

• Sun., Closed

Uconnect Phone allows you to transfer calls between the
system and your mobile phone as you enter or exit your
vehicle and enables you to mute the system’s microphone
for private conversation.

The Uconnect Phone is driven through your Bluetooth
“Hands-Free Profile” mobile phone. Uconnect features
Bluetooth technology - the global standard that enables
different electronic devices to connect to each other with-
out wires or a docking station, so Uconnect Phone works
no matter where you stow your mobile phone (be it your
purse, pocket, or briefcase), as long as your phone is turned
on and has been paired to the vehicle’s Uconnect Phone.
The Uconnect Phone allows up to seven mobile phones to

be linked to the system. Only one linked (or paired) mobile
phone can be used with the system at a time. The system is
available in English, Spanish, or French languages.

WARNING!

ALWAYS drive safely with your hands on the wheel.
You have full responsibility and assume all risks
related to the use of the Uconnect features and appli-
cations in this vehicle. Only use Uconnect when it is
safe to do so. Failure to do so may result in an accident
involving serious injury or death.

Uconnect Phone Button

The radio or steering wheel controls (if
equipped) contain the two control buttons
(Uconnect Phone

button and Voice Com-

mand

button) that enables you to access the

system. When you push the button you hear the word
Uconnect followed by a BEEP. The beep is your signal to
give a command.

NOTE:

The driver side upper windshield trim contains the

microphone for the Uconnect Phone.

MULTIMEDIA

433

Voice Command Button

WARNING!

Any voice commanded system should be used only in
safe driving conditions following all applicable laws.
Your attention should be focused on safely operating
the vehicle. Failure to do so may result in a collision
causing serious injury or death.

Actual button location may vary with the radio.
The individual buttons are described in the “Op-
eration” section.

The Uconnect Phone can be used with any Hands-Free
Profile certified Bluetooth mobile phone. See the Uconnect
website for supported phones. Refer to your mobile service
provider or the phone manufacturer for details.

The Uconnect Phone is fully integrated with the vehicle’s
audio system. The volume of the Uconnect Phone can be
adjusted either from the radio volume control knob or from
the steering wheel radio control (right switch), if so
equipped.

The Uconnect display will be used for visual prompts from
the Uconnect Phone such as “CELL” or caller ID on certain
radios.

Operation

Voice commands can be used to operate the Uconnect
Phone and to navigate through the Uconnect Phone menu
structure. Voice commands are required after most
Uconnect Phone prompts. You will be prompted for a
specific command and then guided through the available
options.
• Prior to giving a voice command, one must wait for the

beep, which follows the “Ready” prompt or another
prompt.

• For certain operations, compound commands can be

used. For example, instead of saying “Setup” and then
“Phone Pairing,” the following compound command
can be said: “Setup Phone Pairing.”

• For each feature explanation in this section, only the

compound form of the voice command is given. You can
also break the commands into parts and say each part of
the command when you are asked for it. For example,
you can use the compound form voice command

434

MULTIMEDIA

“Phonebook New Entry,” or you can break the com-
pound form command into two voice commands:
“Phonebook” and “New Entry.” Please remember, the
Uconnect Phone works best when you talk in a normal
conversational tone, as if speaking to someone sitting a
few feet/meters away from you.

Voice Command Tree

Refer to “Voice Tree” in this section.

Help Command

If you need assistance at any prompt, or if you want to
know your options at any prompt, say “Help” following
the beep. The Uconnect Phone will play all the options at
any prompt if you ask for help.

To activate the Uconnect Phone from idle, simply push the
Phone

button and follow the audible prompts for

directions. All Uconnect Phone sessions begin with a
push of the Phone

button on the faceplate.

Cancel Command

At any prompt, after the beep, you can say “Cancel” and
you will be returned to the main menu. However, in a few
instances the system will take you back to the previous
menu.

Pair (Link) Uconnect Phone To A Mobile Phone

To begin using your Uconnect Phone, you must pair your
compatible Bluetooth enabled mobile phone.

To complete the pairing process, you will need to reference
your mobile phone Owner’s Manual. The Uconnect web-
site may also provide detailed instructions for pairing.

The following are general phone to Uconnect Phone pair-
ing instructions:
• Push the Phone

button to begin.

• After the “Ready” prompt and the following beep, say

“Setup Phone Pairing.”

• When prompted, after the beep, say “Pair a Phone” and

follow the audible prompts.

• You will be asked to say a four-digit Personal Identifi-

cation Number (PIN), which you will later need to enter
into your mobile phone. You can enter any four-digit
PIN. You will not need to remember this PIN after the
initial pairing process.

• For identification purposes, you will be prompted to

give the Uconnect Phone a name for your mobile phone.
Each mobile phone that is paired should be given a
unique phone name.

MULTIMEDIA

435

• You will then be asked to give your mobile phone a

priority level between one and seven, with one being the
highest priority. You can pair up to seven mobile phones
to your Uconnect Phone. However, at any given time,
only one mobile phone can be in use, connected to your
Uconnect System. The priority allows the Uconnect
Phone to know which mobile phone to use if multiple
mobile phones are in the vehicle at the same time. For
example, if priority three and priority five phones are
present in the vehicle, the Uconnect Phone will use the
priority three mobile phone when you make a call. You
can select to use a lower priority mobile phone at any
time (refer to “Advanced Phone Connectivity” in this
section).

NOTE:

Software updates on your phone or the Uconnect

system may interfere with the Bluetooth connection. If this
happens, simply repeat the pairing process. However, first,
make sure to delete the device from the list of phones on
your Uconnect system. Next, be sure to remove Uconnect
from the list of devices in your phone’s Bluetooth settings.

Dial By Saying A Number
• Push the Phone

button to begin.

• After the “Ready” prompt and the following beep, say

“Dial.”

• The system will prompt you to say the number you want

to call.

• For example, you can say “234-567-8901.”
• The Uconnect Phone will confirm the phone number

and then dial. The number will appear in the display of
certain radios.

Call By Saying A Name
• Push the Phone

button to begin.

• After the “Ready” prompt and the following beep, say

“Call.”

• The system will prompt you to say the name of the

person you want to call.

• After the “Ready” prompt and the following beep, say

the name of the person you want to call. For example,
you can say “John Doe,” where John Doe is a previously
stored name entry in the Uconnect phonebook or down-
loaded phonebook. To learn how to store a name in the
phonebook, refer to “Add Names To Your Uconnect
Phonebook,” in this section.

• The Uconnect system will confirm the name and then

dial the corresponding phone number, which may ap-
pear in the display of certain radios.

436

MULTIMEDIA

Phonebook Download – Automatic Phonebook
Transfer From Mobile Phone

If equipped and specifically supported by your phone,
Uconnect Phone automatically downloads names (text
names) and number entries from your mobile phone’s
phonebook. Specific Bluetooth Phones with Phone Book
Access Profile may support this feature. See Uconnect
website for supported phones.
• To call a name from downloaded (or Uconnect) Phone-

book, follow the procedure in “Call by Saying a Name”
section.

• Automatic download and update, if supported, begins

as soon as the Bluetooth wireless phone connection is
made to the Uconnect Phone, for example, after you start
the vehicle.

• A maximum of 1,000 entries per phone will be down-

loaded and updated every time a phone is connected to
the Uconnect Phone.

• Depending on the maximum number of entries down-

loaded, there may be a short delay before the latest
downloaded names can be used. Until then, if available,
the previous downloaded phonebook is available for
use.

• Only the phonebook of the currently connected mobile

phone is accessible.

• Only the mobile phone’s phonebook is downloaded.

SIM card phonebook is not part of the Mobile phone-
book.

• This downloaded phonebook cannot be edited or de-

leted on the Uconnect Phone. These can only be edited
on the mobile phone. The changes are transferred and
updated to Uconnect Phone on the next phone connec-
tion.

Add Names To Your Uconnect Phonebook

NOTE:

Adding names to the Uconnect Phonebook is

recommended when the vehicle is not in motion.
• Push the Phone

button to begin.

• After the “Ready” prompt and the following beep, say

“Phonebook New Entry.”

• When prompted, say the name of the new entry. Use of

long names helps the Voice Command and it is recom-
mended. For example, say “Robert Smith” or “Robert”
instead of “Bob.”

MULTIMEDIA

437

• When prompted, enter the number designation (e.g.,

“Home,” “Work,” “Mobile,” or “Other”). This will allow
you to store multiple numbers for each phonebook entry,
if desired.

• When prompted, recite the phone number for the phone-

book entry that you are adding.

After you are finished adding an entry into the phonebook,
you will be given the opportunity to add more phone
numbers to the current entry or to return to the main menu.

The Uconnect Phone will allow you to enter up to 32 names
in the phonebook with each name having up to four
associated phone numbers and designations. Each lan-
guage has a separate 32-name phonebook accessible only
in that language. In addition, if equipped and supported
by your phone, Uconnect Phone automatically downloads
your mobile phone’s phonebook.

Edit Uconnect Phonebook Entries
• Push the Phone

button to begin.

• After the “Ready” prompt and the following beep, say

“Phonebook Edit.”

• You will then be asked for the name of the phonebook

entry that you wish to edit.

• Next, choose the number designation (home, work,

mobile, or other) that you wish to edit.

• When prompted, recite the new phone number for the

phonebook entry that you are editing.

After you are finished editing an entry in the phonebook,
you will be given the opportunity to edit another entry in
the phonebook, call the number you just edited, or return
to the main menu.

NOTE:
• Editing names in the phonebook is recommended when

the vehicle is not in motion.

• Automatic downloaded phonebook entries cannot be

deleted or edited.

“Phonebook Edit” can be used to add another phone
number to a name entry that already exists in the phone-
book. For example, the entry John Doe may have a mobile
and a home number, but you can add “John Doe’s” work
number later using the “Phonebook Edit” feature.

Delete Uconnect Phonebook Entry

NOTE:

Editing phonebook entries is recommended when

the vehicle is not in motion.

438

MULTIMEDIA

To delete a Uconnect phonebook entry using Voice Com-
mands:

1. Push the Phone

button to begin.

2. After the “Ready” prompt and the following beep, say

“Phonebook Delete.”

3. After you enter the Phonebook Delete menu, you will

then be asked for the name of the entry that you wish to
delete. You can either say the name of a phonebook
entry that you wish to delete, or you can say “List
Names” to hear a list of the entries in the phonebook
from which you choose. To select one of the entries from
the list, push the Voice Command

button while the

Uconnect Phone is playing the desired entry and say
“Delete.”

4. After you enter the name, the Uconnect Phone will ask

you which designation you wish to delete: home, work,
mobile, other, or all. Say the designation you wish to
delete.

• Note that only the phonebook entry in the current

language is deleted.

NOTE:

Automatic downloaded phonebook entries cannot

be deleted or edited.

Delete/Erase “All” Uconnect Phonebook Entries

NOTE:
• ONLY the phonebook in the current language is deleted.
• Automatic downloaded phonebook entries cannot be

deleted or edited.

To delete or erase all Uconnect phonebook entries using
Voice Command:

1. Push the Phone

button to begin.

2. After the “Ready” prompt and the following beep, say

“Phonebook Erase All.”

• The Uconnect Phone will ask you to verify that you

wish to delete all the entries from the phonebook.

3. After confirmation, the phonebook entries will be de-

leted.

List All Names In The Uconnect Phonebook
• Push the Phone

button to begin.

• After the “Ready” prompt and the following beep, say

“Phonebook List Names.”

MULTIMEDIA

439

• The Uconnect Phone will play the names of all the

phonebook entries, including the downloaded phone-
book entries, if available.

• To call one of the names in the list, push the Voice

Command

button during the playing of the desired

name, and say “Call.”

NOTE:

The user can also exercise “Edit” or “Delete”

operations at this point.
• The Uconnect Phone will then prompt you as to the

number designation you wish to call.

• The selected number will be dialed.

Phone Call Features

The following features can be accessed through the
Uconnect Phone if the feature(s) are available on your
mobile service plan. For example, if your mobile service
plan provides three-way calling, this feature can be ac-
cessed through the Uconnect Phone. Check with your
mobile service provider for the features that you have.

Answer Or Reject An Incoming Call — No Call
Currently In Progress

When you receive a call on your mobile phone, the
Uconnect Phone will interrupt the vehicle audio system, if
on, and will ask if you would like to answer the call. Push
the Phone

button to accept the call. To reject the call,

push and hold the Phone

button until you hear a

single beep, indicating that the incoming call was re-
jected.

Answer Or Reject An Incoming Call — Call
Currently In Progress

If a call is currently in progress and you have another
incoming call, you will hear the same network tones for
call waiting that you normally hear when using your
mobile phone. Push the Phone

button to place the

current call on hold and answer the incoming call.

NOTE:

The Uconnect Phone compatible phones in the

market today do not support rejecting an incoming call
when another call is in progress. Therefore, the user can
only answer an incoming call or ignore it.

440

MULTIMEDIA

Making A Second Call While Current Call Is In
Progress

To make a second call while you are currently on a call,
push the Voice Command

button and say “Dial” or

“Call” followed by the phone number or phonebook
entry you wish to call. The first call will be on hold
while the second call is in progress. To go back to the
first call, refer to “Toggling Between Calls” in this
section. To combine two calls, refer to “Conference Call”
in this section.

Place/Retrieve A Call From Hold

To put a call on hold, push the Phone

button until you

hear a single beep. This indicates that the call is on hold.
To bring the call back from hold, push and hold the
Phone

button until you hear a single beep.

Toggling Between Calls

If two calls are in progress (one active and one on hold),
push the Phone

button until you hear a single beep,

indicating that the active and hold status of the two calls
have switched. Only one call can be placed on hold at a
time.

Conference Call

When two calls are in progress (one active and one on
hold):

1. Push and hold the Phone

button until you hear a

double beep, indicating that the two calls have been
joined into one conference call.

Three-Way Calling

To initiate three-way calling, push the Voice Command

button while a call is in progress, and make a second

phone call, as described under “Making a Second Call
While Current Call is in Progress.” After the second call
has established, push and hold the Phone

button

until you hear a double beep, indicating that the two
calls have been joined into one conference call.

Call Termination

To end a call in progress:

1. Momentarily push the Phone

button.

• Only the active call(s) will be terminated and if there is

a call on hold, it will become the new active call. If the
active call is terminated by the phone far end, a call on
hold may not become active automatically. This is cell
phone-dependent.

MULTIMEDIA

441

2. To bring the call back from hold, push and hold the

Phone

button until you hear a single beep.

Redial

To redial the last number called from your mobile phone
using Voice Command:

1. Push the Phone

button to begin.

2. After the “Ready” prompt and the following beep, say

“Redial.”

• The Uconnect Phone will call the last number that was

dialed from your mobile phone.

NOTE:

This may not be the last number dialed from the

Uconnect Phone.

Call Continuation

Call continuation is the progression of a phone call on the
Uconnect Phone after the vehicle ignition has been
switched to OFF. Call continuation functionality available
on the vehicle can be any one of three types:

1. After the ignition is switched to OFF, a call can continue

on the Uconnect Phone either until the call ends, or until

the vehicle battery condition dictates cessation of the
call on the Uconnect Phone and transfer of the call to the
mobile phone.

2. After the ignition is cycled to OFF, a call can continue on

the Uconnect Phone for a certain duration, after which
the call is automatically transferred from the Uconnect
Phone to the mobile phone.

3. An active call is automatically transferred to the mobile

phone after the ignition is cycled to OFF.

Uconnect Phone Features

Language Selection

To change the language that the Uconnect Phone is using:
• Push the Phone

button to begin.

• After the “Ready” prompt and the following beep, say

the name of the language you wish to switch to English,
Espanol, or Francais.

• Continue to follow the system prompts to complete the

language selection.

After selecting one of the languages, all prompts and voice
commands will be in that language.

442

MULTIMEDIA

NOTE:

After every Uconnect Phone language change

operation, only the language-specific 32-name phonebook
is usable. The paired phone name is not language-specific
and usable across all languages.

Emergency Assistance

If you are in an emergency and the mobile phone is
reachable:
• Pick up the phone and manually dial the emergency

number for your area.

If the phone is not reachable and the Uconnect Phone is
operational, you may reach the emergency number as
follows:
• Push the Phone

button to begin.

• After the “Ready” prompt and the following beep, say

“Emergency” and the Uconnect Phone will instruct the
paired mobile phone to call the emergency number.

NOTE:
• The emergency number dialed is based on the country

where the vehicle is purchased (911 for the U.S. and
Canada and 060 for Mexico). The number dialed may
not be applicable with the available mobile service and
area.

• If supported, this number may be programmable on

some systems. To do this, push the Phone

button and

say “Setup,” followed by “Emergency.”

• The Uconnect Phone does slightly lower your chances of

successfully making a phone call as to that for the
mobile phone directly.

WARNING!

To use your Uconnect Phone System in an emergency,
your mobile phone must be:
• Turned on.

• Paired to the Uconnect System.

• Have network coverage.

MULTIMEDIA

443

Roadside Assistance/Towing Assistance

If you need roadside assistance:
• Push the Phone

button to begin.

• After the “Ready” prompt and the following beep, say

“Towing Assistance.”

NOTE:

You should program the desired Towing Assistance

phone number using the Voice Command system. To do
this, push the Phone

button and say “Setup,” fol-

lowed by “Towing Assistance.” When prompted say
1-800-521-2779 for U.S., 1-800-363-4869 for Canada, 55-
14-3454 for Mexico City and 1-800-712-3040 for outside
Mexico City in Mexico.

Paging

To learn how to page, refer to “Working With Automated
Systems.” Paging works properly except for pagers of
certain companies, which time out a little too soon to work
properly with the Uconnect Phone.

Voice Mail Calling

To learn how to access your voice mail, refer to “Working
With Automated Systems.”

Working With Automated Systems

This method is used in instances where one generally has
to press numbers on the mobile phone keypad while
navigating through an automated telephone system.

You can use your Uconnect Phone to access a voice mail
system or an automated service, such as a paging service or
automated customer service line. Some services require
immediate response selection. In some instances, that may
be too quick for use of the Uconnect Phone.

When calling a number with your Uconnect Phone that
normally requires you to enter in a touch-tone sequence on
your mobile phone keypad, you can push the Voice Com-
mand

button and say the sequence you wish to enter,

followed by the word “Send.” For example, if required
to enter your PIN followed with a pound, (3 7 4 6 #), you
can push the Voice Command

button and say, “3 7 4

6 # Send.” Saying a number, or sequence of numbers,
followed by “Send,” is also to be used for navigating
through an automated customer service center menu
structure, and to leave a number on a pager.

444

MULTIMEDIA

Dodge Grand Caravan (2019 year). Manual - part 27