|
|
TEST ACTION APPLICABILITY 3 Disconnect the Intrusion Sensor No. 1 connector. All Yes → Go To 4 No → Repair the Fused B(+) circuit for an open. Perform BODY VERIFICATION TEST - VER 1. 4 Disconnect the Intrusion Sensor No. 1 connector. All Yes → Go To 5 No → Repair the Ground circuit for an open. Perform BODY VERIFICATION TEST - VER 1. 5 Turn the ignition off. All Yes → Repair the Intrusion Sensor 1 Signal wire for a short to ground. Perform BODY VERIFICATION TEST - VER 1. No → Go To 6 6 Disconnect the Intrusion Sensor No. 1 connector. All Yes → Go To 7 No → Repair the Intrusion Sensor 1 Signal wire for an open. Perform BODY VERIFICATION TEST - VER 1. 7 Disconnect the Intrusion Sensor No. 1 connector. All Yes → Repair the Intrusion Sensor Interface circuit for a short to ground. No → Go To 8 8 Disconnect the Intrusion Sensor No. 1 connector. All Yes → Replace the Intrusion Sensor. Perform BODY VERIFICATION TEST - VER 1. No → Repair the Intrusion Sensor Interface circuit for an open. Perform BODY VERIFICATION TEST - VER 1. 221 VEHICLE THEFT/SECURITY INTRUSION SENSOR 1 CIRCUIT OPEN/SHORT TO GROUND — Continued |