|
|
(2) Disconnect and isolate the battery negative cable. Wait two minutes for the system capacitor to (3) Remove the trim panel from the inside of the B-pillar. (Refer to 23 - BODY/INTERIOR/B-PILLAR (4) Pull the height adjuster trim away from the upper B-pillar to disengage the driver from the lug of (5) Remove the nut that secures the front seat belt turning loop to the height adjuster (Fig. 41). (6) Remove the front seat belt turning loop from the height adjuster. (7) Remove the two screws that secure the seat belt turning loop height adjuster to the upper inner Fig. 40 Turning Loop Height Adjuster 1 - HEIGHT ADJUSTER TRIM Fig. 41 Front Seat Belt Turning Loop 1 - HEIGHT ADJUSTER Fig. 42 Seat Belt Turning Loop Adjuster Remove/ Install 1 - SCREW (2) 8O - 34 RESTRAINTS VA |