|
|
TRANSPONDER CYCLIC REDUNDANCY CHECK (CRC) FAILURE For a complete wiring diagram Refer to Section 8W. • When Monitored: • Set Condition: Possible Causes IGNITION KEY SKIM Diagnostic Test 1. ACTIVE DTC With the scan tool, read and record the SKIM DTCs. With the scan tool, erase the SKIM DTCs. NOTE: Perform the following test several times to make sure the DTC is current. Wait 10 seconds. Turn the ignition on. With the scan tool, read the SKIM DTCs. Is the DTC active at this time? Yes >> Go To 2 No >> Refer to the INTERMITTENT CONDITION Diagnostic Procedure. Perform SKIS VERIFICATION. (Refer to 8 - ELECTRICAL/VEHICLE THEFT SECURITY - STANDARD 2. AVAILABILITY OF MULTIPLE KEYS Are there multiple vehicle ignition keys available? Yes >> Go To 3 No >> Go To 4 8Q - 18 VEHICLE THEFT SECURITY - ELECTRICAL DIAGNOSTICS DR/DH |