TEST
ACTION
APPLICABILITY
6
If there are no possible causes remaining, view repair.
All
Repair
Replace and program the Sentry Key Immobilizer Module in
accordance with the Service Information.
7
Turn the ignition off.
Note: Visually inspect the related wiring harness. Look for any chafed,
pierced, pinched, or partially broken wires.
NOTE: Visually inspect the related wiring harness connectors. Look for
broken, bent, pushed out, or corroded terminals.
Note: Refer to any Technical Service Bulletins (TSB) that may apply.
Were any problems found?
All
Yes
→
Repair wiring harness/connectors as necessary.
No
→
Test Complete.
352
VEHICLE THEFT/SECURITY
TRANSPONDER COMMUNICATION FAILURE —
Continued