|
|
TEST ACTION APPLICABILITY 37 Turn the ignition off. All Yes → No → Repair the open S/C Sw Signal Circuit from the right switch to the 38 Turn the ignition off. t, read the S/C Switch voltage. Does the DRBIII t show S/C Switch is less than 1.0 volt? All Yes → Replace the right Speed Control Switch. No → 39 Turn the ignition on. t in Inputs/Outputs, read the Speed Control Cancel Switch state. While observing the display, press the Cancel Switch several times. t show the Cancel Switch status change appropriately from Pressed to Released? All Yes → No → Replace the Right S/C Switch. 40 Turn the ignition on. t in Inputs/Outputs, read the Speed Control Coast Switch state. While observing the display, press the Coast Switch several times. t show the Coast Switch status change appropriately from Pressed to Released? All Yes → Test Complete. No → Replace the Right S/C Switch. 41 Turn the ignition off. All Yes → Repair as necessary. No → 240 SPEED CONTROL *CHECKING SPEED CONTROL OPERATION WITH NO DTC’S PRESENT Continued |