|
|
MAINTENANCE SCHEDULE Maintenance activities 2-2 2.2 OVERVIEW OF ANNUAL MAINTENANCE ACTIVITIES ANNUAL MAINTENANCE ACTIVITIES (Y-SERVICE) ”Correct if necessary after inspection” CAB AND ELECTRICAL SYSTEM f Check headlight setting f Check fluid level of cab tilting pump f Check cab fastening ENGINE, COOLING SYSTEM AND FUEL SYSTEM f Check/adjust valve clearance- See Note 6 Done f Yes f No f Check/adjust valve clearance and unit injectors (VF engine) f Check/adjust C--brake clearance (VF engine) f Check/adjust DEB clearance f Clean fuel coarse filter (XE engine) f Replace coolant filter f Check antifreeze content of coolant f Change coolant - See Note 1 Changed f Yes f No f Check glow plugs - See Note 7 STEERING GEAR AND BRAKE SYSTEM Replaced f Yes f No f Check steering ball joints f Replace air dryer filter element f Check compressor line f Check brake cylinder fastening f Check automatic brake adjuster f Check/adjust load--dependent control valve f Check electropneumatic valves of ABS/ASR f Check attachment of universal joint of steering box input shaft f Push front axle wheel speed sensors up against pole ring DRIVE AND CHASSIS f Check pivot points of trailing axle lifting device f Change differential oil - See Note 2 Changed f Yes f No f Change hub oil - See Note 2 Changed f Yes f No f Check operation of differential lock f Check drive shaft play f Change gearbox oil - See Note 3 Changed f Yes f No f Change retarder oil (Voith retarder) - See Note 5 Changed f Yes f No f Replace grease of grease lubricated hubs - See Note 4 Replaced f Yes f No f Check fifth wheel f Check trailer coupling f Check superstructure attachment OTHER ACTIVITIES 4 200424 |